ITPP047 Thermal Printer Software Manual 0.10 Document Name: ITPP047 Software Manual-0.10.
Version History Date By Changes Version 2020-12-5 Ace Initial Draft 0.01 2020-12-22 Ace Adding Wifi pictures 0.05 2020-12-23 Ace Windows Wifi Setting steps and Loyverse Settings 0.06 2020-12-24 Ace Mac USB installation and IP Address 0.07 2020-12-29 Ace Bluetooth connection and chapter layout polishing 0.08 2020-12-30 Ace Overall layout, polish 0.09 2020-12-31 Ace Overall layout, polish 0.10 2021-1-5 Byron Fixed the format Fixed the typing mistakes 0.
Contents Version History......................................................................................................................................2 1.0. Get Started.............................................................................................................................. 4 2.0. Installation...............................................................................................................................5 2.1. USB installation...................................
1.0. Get Started ITPP047 supports the following operating systems. ■ Windows: ・ Windows 10 * 32-bit and 64-bit (except Windows 10 Mobile and Windows 10 IoT Core) ・ Windows 8.1 * 32-bit and 64-bit (except WindowsRT 8.1) ・ Windows 8 * 32-bit and 64-bit (except WindowsRT) ・ Windows 7 32-bit and 64-bit ■ Mac: ・ Mac OS X Lion – 10.7, Mac OS X Mountain Lion – 10.8 , Mac OS X Mavericks – 10.9, ・ Mac OS X Yosemite – 10.10, Mac OS X El Capitan – 10.11, Mac OS Sierra – 10.12 ・ Mac OS Sierra – 10.12.
2.0. Installation To use the ITPP047 in a Windows environment, you need to install this printer driver in advance. 2.1. USB installation Tips: a) Make sure the printer is connected to your Windows computer by the attached USB cable and power on. b) The following are the simulated installation steps, the operating system used is Windows 7, on the basis of actual installation interface (System). 2.1.1. Windows Installation Driver download link: https://munbyn.
) When the following window appears, click on the "Install". 7) Wait for the progress bar to end and the following window will appear, click on the " Finish". 8) Another installation window will pop up automatically, and the driver will automatically detect your computer system, not need change anything. Page6of41 ITPP047 Thermal Printer Software Manual Version 0.
9) Clikc on the"Check the USB port" . 10) A USB port window will automatically pop up. 11) The printer will automatically feed out a USB port detection ticket. Page7of41 ITPP047 Thermal Printer Software Manual Version 0.
12) Click on the "OK" and "Install now". 13) A Succeed windows will automatically pop up and then click on the "OK". 14) The printer will automatically feed out a "POS Printer" test page. Page8of41 ITPP047 Thermal Printer Software Manual Version 0.
2.1.2. Windows test page 1) Open any file on your desktop (example only). 2) Find "Computer(is the name of your personal computer)" on the left (names may vary, subject to actual conditions). Right click on the "Computer", click on the "Properties". 3) Enter the system details interface, click on the "Control Panel" at the top of the page. Page9of41 ITPP047 Thermal Printer Software Manual Version 0.
4) Click on the "View devices and printers". 5) Enter the Devices and Printers interface, right click on the "POS-80C". 6) Click on the "Printer Properties". 7) Click on the "Print Test page". Page10of41 ITPP047 Thermal Printer Software Manual Version 0.
8) A test page has been sent to the printer. 9) The printer will print a Windows test page which means the printer is ready. Page11of41 ITPP047 Thermal Printer Software Manual Version 0.
2.1.3. Mac installation To use the ITPP047 in a Mac environment, you need to install this printer driver in advance. 1)Open the file "P064 MUNBYN". 2) Open the file "Driver". 3) Open the file "Mac Driver". 4) Open the "macOSDriver" dmg file. 5) Choose the "macOSDriver_signed. pkg " file and the installation will get started. 6) Follow the instruction and click on the "Continue" again and again. Page12of41 ITPP047 Thermal Printer Software Manual Version 0.
7) Enter your MAC’s passward for the new driver installation and click "install Software". 8) Wait for a second and click on the "Close". 9) Go to the "System and Preferences" and chose the "Printers & Scanners" 10) Clikc on the "+" to add the new printer 11) A "Printer-80" window will pop up automatically. Page13of41 ITPP047 Thermal Printer Software Manual Version 0.
12) Wait for a few seconds and the detials will show up and then change the "Use" option. 13) Choose Select Software, search "80" and then choose "POS-80". 14) Click on the "OK" and "Add" to add this new printer(POS-80C). Page14of41 ITPP047 Thermal Printer Software Manual Version 0.
2.0 Linux Installation 1) Open terminal input "sudo ./install.sh". 2) Input your root password. (If you have not root password, open terminal and input"sudo passwd root"to set root password). 3) Open cups at localhost: 631 in your browser and choose "Adding Printers and Classes" . Page15of41 ITPP047 Thermal Printer Software Manual Version 0.
4) Click on the "Add Printer". 5) Choose "Unknow" and "AppSocket/HP JetDirect" and click on contiune. 6) Enter "PrinterName"(Anyone is fine) and clikc on the"Contiune". Page16of41 ITPP047 Thermal Printer Software Manual Version 0.
7) Choose "POS" and click on the "Continue". 8) Choose "POS Label-80" and click on the "Add Printer" 9) You can choose to further set as the default printer. 10) The printer has been successfully installed. Page17of41 ITPP047 Thermal Printer Software Manual Version 0.
3.0. LAN installation 3.1. For Windows: 3.1.1. Get IP Address a) Go to control panel(Please refer to chapter 1.1.2), and click "View network status and tasks" b) Click on the "Local connection" c) You can see the basic information of the network connection, click on the "Details". d) IPv4 address is the local IP. Page18of41 ITPP047 Thermal Printer Software Manual Version 0.
Tips: Install the USB driver, please refer to chapter 1.1.1. Prepare a router, three network cables, the first one is the access network to connect to the router, the second one connected to the computer, and the other one connected to the printer 3.1.2. Installation: 3.1.2.1. "Printer Test V5.0" Settings 1) Open "Printer CD" and "Tools". 2) Open "Printer Test V5.0C ". 3) Check the PortSelect and Printer Type. Enter the Local IP, Printer IP.
5) Cilck on the "Ports" and then "Add Port". 6) Choose "Standard TCP/IP Port" and click on the "New Port". 7) Enter the new IP set before and click on the "Next". 8) Please wait for the detecting. 9) Click on the "Next" and "Finish" Page20of41 ITPP047 Thermal Printer Software Manual Version 0.
10) Go back to the "Ports" and double check the TCP/IP Port is chosen or not. 11) Please refer to the chapter 2.1.2 and do a test page. 3.1.2.2. DHCP method: 1) Open "Printer CD" and "Tools" 2) Open NETtool V1.03->NETtool 3) Click on the IP "192..." , switch the DHCP on, and click on the "Setting". A new IP address will come out automatically Page21of41 ITPP047 Thermal Printer Software Manual Version 0.
Page22of41 ITPP047 Thermal Printer Software Manual Version 0.
4.0. WiFi Installation 4.1. For Mac: 4.1.1. Get IP information a) Go to"System Preference"and click on the "NetWork". b) Double-check your Wifi connection and click "Advance". c) Click on the "TCP/IP" . d) Double check the IP details. Page23of41 ITPP047 Thermal Printer Software Manual Version 0.
4.1.2. Connection 1) Connect "Wifi Printer". 2) Open a browser and enter "10.10.10.254". 3) Enter "admin"(Username and Password). 4) Click on the "STA Settings". Page24of41 ITPP047 Thermal Printer Software Manual Version 0.
5) Click on the "Scan" and choose the home or public WiFi. 6) Enter the WiFi’s Password and the IP information(Refer to step d in the previous chapter). Click on the "Save" and "Restart". 7) A WiFi Printer ticket will pop up automatically that means the printer is now successfully connect to your home or public WiFi. Page25of41 ITPP047 Thermal Printer Software Manual Version 0.
4.2. For Widows 4.2.1. Get IP information: a) Go to control panel(Please refer to A), and click "View network status and tasks". b)Click on the "Wifi connection". c)You can see the basic information of the network connection, click on the "Details". d)IPv4 address is the local IP. 4.2.2. "Printer Test V5.0C" Settings 1) Open "Printer CD" and "Tools". Page26of41 ITPP047 Thermal Printer Software Manual Version 0.
2) Open Printer Test V5.0C and make sure the printer is connected to a Windows computer by USB cable. 3) Check the "PortSelect" and "PrinterType". 4) Click on the "Advance". 5) Find " Net Setting" and click on the "Set Net". Page27of41 ITPP047 Thermal Printer Software Manual Version 0.
6) Enter the IP Address, NetMask and GateWay (Refer to step d in the previous chapter), and then enter the Wifi name(SSID), password(WIFI Key). Click Setting All. 7) A WiFi ticket will pop up automatically that means the printer is successfully connected to the WIFI. 4.3. Loyverse test(Android or IOS). Demo video: https://munbyn.biz/ITPP047-W-L 1) Setting as the below shown. Page28of41 ITPP047 Thermal Printer Software Manual Version 0.
2) Click "PRINT TEST". 3) A Test receipt will pop up automatically that means Wifi setting is done. Page29of41 ITPP047 Thermal Printer Software Manual Version 0.
5.0. Bluetooth connection 5.1. For Windows 10 1) Click on the information icon in the lower right corner of the screen. 2) Right click on the the Bluetooth icon and go to Settings. 3) Click on the "+" and choose Bluetooth. 4) Choose "Printer001" , enter the PIN code "0000" . Page30of41 ITPP047 Thermal Printer Software Manual Version 0.
5) Go to the Driver file and click on the "POS-80 Windows driver(With..)". 6) Choose "Other" and click on the "Install Now". 7) A succeed window will pop up automatically and click on the "Yes". 8) Go to the "Devices and Printers" , Doubl- Click on the "Printer001", and then click on the "Hardware", you can see the com port connected to the printer Page31of41 ITPP047 Thermal Printer Software Manual Version 0.
9) Go back to the "Ports" and Select the com port. 10) Refer to the chapter 2.1.2 and do a test page. Page32of41 ITPP047 Thermal Printer Software Manual Version 0.
6.0. Uninstallation/ Delete printer 1) Go to the Control Panel and click on "View devices and printers". 2) Right click on the POS-80 and click on the Remove device. Page33of41 ITPP047 Thermal Printer Software Manual Version 0.
7.0. Configuration 7.1. For Windows: 7.1.1. "Printer Test V5.0" 7.1.1.1. Introduction of Main Interface Tips: The numbers in the picture correspond to the points 1.Communication port selection: parallel port, serial port, USB port and Ethernet port. 2.Printer type: default is POS-80 3.Parallel port Settings (LPT Set): Parallel port Settings ---be consistent with the computer communication parallel port number. 4.
"New ID address"--- the new ID address the printer’s ID address is to be changed to(Printer’s ID address must be an only address within a network). "Net Monitor"---Monitor printer status through network.(NET port available) 6. Number of the copies: It refers to the printing quantity of the repeat print of the test content. 7. HEX Data can only be transmitted by inputting hexadecimal after having selected printing content. (It’s mainly used to send instructions to the printer). 8.
b) Size requirement and function selection of paper cutting of NV LOGO printing. c) Open LOGO: Click and select BMP format picture or the LOGO file that you want to print. d) Download NV LOGO: Click the download button after opening the BMP format file and the file will be downloaded to the printer. Print the file content by clicking "print LOGO" button. e) Print LOGO: Click this button to complete the LOGO image printing. f) Clear LOGO: Remove the downloaded NV LOGO. g) Multi NV LOGO down.
A: Set Net(WIFI Settings): a) Set up the Printer’s IP address. b) Set up the Subnet Mask. c) Set up the Gateway. d) WIFI SSID address settings. Note: the SSID address is the name of your Wireless Router’s name. e) WIFI password settings. Note: the password of the Wireless Router f) Encryption type of WIFI SSID settings. Note: the encryption type of the Wireless Router.
6."USB Mode Setting" Mode Setting of printer’s USB port includes USB Printing and Virtual COM. USB mode switches according to customer demand. For specific operation, refer to PDF file "Virtual COM setting" in CD 7. "Printing Width Set" Change the printing with to 48/52/56/58/64/68/72/76/80mm 8. "Barcode test" Choose a variety of barcode types and height to test the print with a total of nine kinds of one-dimensional code choice. 9.
Open "Printer Test V5.0C", clear the input field and enter "1F 1B 1F 11 11", check "HEX", and click on the "Print" 7.1.2. Printer Settings 7.1.2.1. Device management Tips: Please refer to the chapter 1.1.2 and enter the "Devices and Printers". 1) Right click on the "POS-80C" and choose "Printer properties" 2) Click on the "Device Settings", enter POS-80C Device Settings. Page39of41 ITPP047 Thermal Printer Software Manual Version 0.
3) Choose the Cash Drawer After Printing 4) Change the Printing Density if the default printing is Blurry. 5) Choose Paper Feed after printing. Page40of41 ITPP047 Thermal Printer Software Manual Version 0.
Contact us Need Tech Support, contact us by: E-mail: support@munbyn.com Whatsapp: +8617817881067 Skype: munbyn Support time: Monday to Friday 24 hours. Page41of41 ITPP047 Thermal Printer Software Manual Version 0.