User Manual

ManualsBrandsMUNBYN ManualsOffice ElectronicsLabel Printer, 150mm/s 4x6 Desktop USB Thermal Shipping Label Printer for Shipping Packages Postage Home Small Business, Compatible with Etsy, Shopify,Ebay, Amazon, FedEx, UPS

Logistics Label Printer

Version:2.0.1

USER GUIDE

Focus on

Every Powerful

Moment

White Gray Green

Summary of content (8 pages)

PAGE 1
Focus on Every Powerful Moment Version:2.0.
PAGE 2
CONTENTS PRODUCT INTRODUCTION What's in the box? Product Introduction 1 Quick Printer Connection 2 Label Setup 2 Driver Download 3 Windows Driver Installation 3 Mac Driver Installation 6 “FEED” Button Instruction 10 LED Status 11 FAQ 11 Specifications 13 Support 13 1 2 5 6 3 7 9 4 8 10 11 1 Printer MAC Alcohol 2 Adapter 3 Pad 4 USB 5 Cable Power 6 dapter Power 7 Cable After-sale 8 Card 9 Card 10 Labels 11 User manual 1 USB Flash drive
PAGE 3
QUICK PRINTER INSTALLATION 3 Power off 1 2 Power on 5 6 4 Note：Please use the power adapter provided by MUNBYN. LABEL SETUP 1 Facing the front of the printer, press the cover open button to open the top cover. 2 Install the label paper with the holders on both sides. 3 Finish the label paper installation, and then close the cover. 4 For new label paper, do the label size calibration again. Label size calibration: 1. Turn on the printer. 2. Press FEED button and hold on. 3.
PAGE 4
2. Click on "Install" to start installing the driver. 4. Set the printer paper size. 5. Choose 100×150mm(4x6“) label size and apply, then we can use our printer to print shipping labels. 3. Follow the guideline to install until "Finish" appears, then we can use our printer to print shipping labels.
PAGE 5
MAC DRIVER INSTALLATION 3. Follow the guideline to install until "The installation was successful appears". Note: Please connect to the computer first and then turn on the printer. 1. Open the driver software you downloaded. 2. Start installation. 4. Add printer in printer list.
PAGE 6
MAC SETUP STEPS 5. Choose printer and "Select Software".
PAGE 7
6. Page Setup, choose 4x6” (100x150 mm), then we can open the document and select the printer to print shipping labels.
PAGE 8
Q3: Why the printer is skipping labels or continuously feeding? A3: Make sure your computer does not send a print command to ITPP941, disconnect the USB cable, and then run the automatic label identification function. Tutorial video: https://munbyn.biz/941cfv Q4: Why the printer print extra blank labels after the one successful print? A4: Please check if the paper size setting of the printer is correct and adjust the scale and margins in preview page or page setup when you are printing from browser.