Instructions / Assembly

Getting Started Getting Started
4 5
Getting Started
INCLUDED PARTS
If any parts are missing or damaged, please contact our Customer Satisfaction Team
at 1-800-344 -2229.
TOOLS NEEDED:
• Drill
• Phillips screwdriver
• Flathead screwdriver
• Pencil
• Tape measure
Wall anchor (x4) Wall screw (x4)
Gate (x1)
Wrench Wall cup & round
sticky pad (x4)
2.75" small
extension (x2)
(Pre-installed)
Adjustment rod with threaded
nut (x4) (Pre-installed)
STEP 1: IDENTIFY GATE PLACEMENT
For maximum security, DO NOT use this gate in any location without installing all 4 wall
cups, sticky pads and screws provided. In some openings only 2 top wall cups can be
fitted. The gate must be installed between two structurally sound surfaces.
GATE IS SUITABLE FOR:
TOP OF STAIRS
If installing the gate at the top of stairs, it MUST be
placed on the top landing and only swing away from
the stairs.
BOTTOM OF STAIRS
If installing the gate at the bottom of stairs, we
recommend placing it on the floor. If the gate must
be placed on the lowest stair, position it toward the
front of the step.
HALLWAYS AND DOORWAYS
Be sure that the gate is resting on the floor. The gate
should NOT be raised above the floor.