Operating instructions

VENTINGEXAMPLES
TOTAL EQUIVALENT
COMBINED FRICTION TOTAL
VENTLENGTH LOSS FRICTION
/FEET) QTY. (FEET) LOSS
INTAKE& OF90* FOREACH FOR
EXHAUST ELBOWS ELBOW ELBOWS
GRANDTOTAL
VENTLENGTH
(FEET)
WITHFITTING
FRICTION
LOSSADDED
'12 2 5 10 22
20 2 5 10 30
20 3 5 15 35
20 4 5 20 40
20 5 5 25 45
20 6 5 30 50
20 7 5 35 55
20 8 5 40 60
20 9 5 45 65
20 10 5 50 70
30 3 5 15 45
30 4 5 20 50
30 5 5 25 55
30 6 5 30 60
30 7 5 35 65
30 8 5 40 70
40 3 5 15 55
_0 4 5 20 60
_0 5 5 25 65
_0 6 5 30 70
50 3 5 15 65
50 4 5 20 70
4-D. CLEANER / CEMENT
Cement for Exhaust and Intake piping, must conform to ASTM D-2564 for joining PVC joints. Make sure to check all joints
to assure that they are properly sealed against leaks. It is important to pay special attention to the exhaust piping, which is
pressurized with harmful gases!
4-E. CONDENSATE
This is a condensing high efficiency appliance, therefore this trait has a condensate removal system. Condensate is nothing
more than water vapor, derived from the combustion products, similar to an automobile when it is initially started. This
condensate does have a low PH and should be treated with a condensate filter. This filter contains either lime crystals or
marble crystals, which will neutralize the condensate. The outlet of the filter is sized for 5/8" ID (Inside diameter) plastic
tubing. It is very important that the condensate line is sloped away from and down to a suitable inside drain, if the condensate
outlet on the Munchkin is lower than the drain, you must use a condensate removal pump. A condensate filter and a
condensate pump kit are available from HTP. It is also very important that the condensate line is not exposed to freezing
temperatures, or any other type of blockage. Plastic tubing should be the only material used for the condensate line: as steel,
brass, copper, or others will be subject to corrosion and deterioration. A second vent may be necessary to prevent condensate
line vacuum lock ifa long horizontal rtm is used. Also an increase to 1" tubing may be necessary.