User Guide

ManualsBrandsmunchkin ManualsOthermunchkin MKFE0769-01 98 Degree Digital Bottle Warmer

Owner’s Guide

KEEP FOR FUTURE REFERENCE

Please read the instructions carefully before using this product.

CCD-0284-001 REV 2

98° Digital Bottle Warmer

Summary of content (9 pages)

PAGE 1
Owner’s Guide 98° Digital Bottle Warmer KEEP FOR FUTURE REFERENCE Please read the instructions carefully before using this product.
PAGE 2
Table of Contents IMPORTANT SAFEGUARDS FCC Information .................................................................................................................................. 3 INCLUDED PARTS Included Parts ....................................................................................................................................... 6 Included Adapters................................................................................................................................
PAGE 3
Important Safeguards • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
PAGE 4
Included Parts Adapters Included Adapters No adapter necessary for: • Avent Natural 4oz and 9oz* • EvenFlo Balance 5oz and 9oz* Adapter A (with Gasket) for: • Dr.
PAGE 5
How to Use How to Use BEFORE YOU BEGIN FOR USE WITH ROOM-TEMPERATURE OR REFRIGERATED LIQUIDS ONLY. FROZEN BREAST MILK MUST BE THAWED BEFORE USING THIS APPLIANCE. The warmer should not be powered ON without a baby bottle filled with water or breast milk installed on the warmer. Warmer may overheat if used improperly. 1. Choose the correct adapter for your baby bottle (see Included Adapters on page 7).
PAGE 6
How to Use How to Use 4. Open the rubber cover on the back of the warming unit, then insert the power cord. Plug the cord into an electrical outlet. The standby mode is ready and display will blink 00.0, it will automatically stop after 30 seconds if no action is taken. NOTE: When the warmer turn off after 30 seconds of no action. PRESS AND HOLD the button once for 2 seconds to activate the standby mode. Next PRESS and HOLD again for 2 seconds to activate the heating cycle. 5.
PAGE 7
How to Use HOW TO CLEAN Always unplug unit and ensure that it is cool before cleaning. Do not use scouring pads, abrasives or solvents for cleaning; they may damage the appliance and its surface. Place the rubber plug back into the plug attachment to prevent water intrusion and cause electrical short during cleaning. Digital Bottle Warmer: Wipe all surfaces with a damp cloth or sponge using mild liquid soap, rinse with clear water. Allow to air-dry. Do not submerge unit in liquid.
PAGE 8
Customer Service Customer Service TECHNICAL SPECIFICATIONS • Product name: 98° Digital Bottle Warmer • Model: MKFE0769-01 Electrical Rating: • Input Voltage: 120VAC, 60Hz • Wattage: 110W • Warming unit dimensions: L3.3”(8.3 cm) x W3” (7.6 cm) x H3.4” (8.5 cm) • Warming unit net weight: 0.4 lb(198g) • Safety listings: • CONFORMS TO UL STD. 1026 ONE-YEAR LIMITED WARRANTY Munchkin’s 98° Digital Bottle Warmer includes a 1-year limited warranty against defects from the date of purchase.