Specifications

Ducted Split Type Air-Conditioning
22
1. Press ▲ or ▼ to select the unit that needed to be control. It is available to control several units by
Group Control (1~16), or control single unit by Single Control.
2. When selected a certain or several units by Single Control or Group Control, Timer setting and On/off
setting can be set. Timer setting can set 4 on/off times in a day in one week; and on/off setting can be done by
pressing on/off button.
3. Connection between WEEKLY TIMER and manual control is shown as following:
4. please check the manual to read how to set the address of manual.
10 Installation instruction
The installation must accord with local regulation, and must be carried out by the professionals. Never
carry out the work by yourself without the help of professionals. And don’t supply power, until all the
work is nished according to the user’s manual.
10.1 Selection proper installation location
1) Selection the proper location for indoor unit
Avoid the direct sunshine.
Make sure the suspension bracket is strong enough to withstand the unit’s weight.
Select a place for easily connection of the drain hose.
The inlet and outlet ports should not be obstructed so that the indoor air circulates well.
Make sure the convenient connect of the connection pipes.
Selection a location that is far away from the combustible or explosive material and gas.
Selection a location that is far away from the cankerous material, frog, dusk or moist.
2) Selection the proper location for outdoor unit
Outdoor unit should be installed in a steady and stable place.
To reduce the length of the refrigerant pipe and bend number, make sure the indoor unit and outdoor unit
be close to each other.
Ensure the operation noise do not disturb neighbors and passerby.