User`s manual

ML180-MLT350 Dehumidifiers
190TGB-1034-A 7 Appendix 1- Options 33
Acknowledge alarms
Acknowledge the alarm by pressing SET on the operator panel. The
display now starts to flash showing the alarm message and the current
relative air humidity alternately. The function of the reset depends on
the settings of parameters, see table 7-1.
Sensor calibration
The humidity transmitterís read off value can be calibrated with the
Operator Panel’s Sensor Offset (parameter 05, see table 7-1.) e.g. 3 %RH
too much, the offset needs to be decreased with 3%.
For calibration of the humidity transmitter please contact Munters
Product Service.