User`s manual

ML180-MLT350 Dehumidifiers
6
1 Introduction 190TGB-1034-A
1.4 Markings
Figure 1-1. Location of labels
Figure 1-2. Example of identification plate content & Label details
1.5 Operator stations
The dehumidifier is controlled and supervised with the help of the
control panel, located on the front of the unit, see figure 3-1.
1.6 Fault indications
Faults are clearly indicated through an illuminated indicator on the
control panel, see figure 3-1.
Alarms related to air relative humidity are indicated in the display of
the RH98 (if fitted) operators panel, see section 7.4, RH98.
(GB)CHANGE FILTER
(GB)CHANGE FILTER
(GB)CHANGE FILTER
(GB)CHANGE FILTER
1
2
3
4
5
6
6
3
2
4
5
Type ML420
Fabr. No 0214 190XXX XXXXX
3 ~ 400V 50Hz
370W 42.kW
Max
4,57kW
Munters Europe AB
M
IP44
1
(GB) CHANGE FILTER
(SW) BYT FILTER
(FR) REMPLACER LE FILTER
(DE) FILTER AUSWECHSELN
6
1 = Identification Plate 2 = Dry Air Outlet
3 = Wet Air Outlet 4 = Process Air Inlet
5 = React Air Inlet 6 = ML180-MLT350 Filter