Integration Guide

WIT2410

After naming the file and clicking on OK, the Capture Data window opens and shows the

amount of data being received. Clicking on Done stops the loading of received data into

the file.

7.2. Function Keys

All of the function key shortcuts are described below:

F1 Toggles state of DTR (Sleep). State is shown in status line.

F2 Toggles state of RTS. State is shown in status line.

F3 Transmits “:wit2400”. Used to enter control mode.

F5 Toggles local echo. If you are transmitting characters through one modem

to another WIT2450, this allows you to see what you are typing.

F6 Toggles stream mode. Causes WinCOM to transmit a repeating pattern of

characters. Useful for testing.

F8 Toggles binary mode. Displays extended ASCII and control characters.

Useful for testing.

PgUp Sets data rate of PC serial port to next higher value. Value is displayed in

status line. Useful when WinCOM is used to change the WIT2450

interface data rate. WinCOM can communicate at new data rate without

having to exit and re-enter WinCOM.

PgDn Sets data rate of PC serial port to next lower value. Value is displayed in

status line.