Integration Guide

WIT2410

The Packet Builder is an easy way to test the multipoint addressing mode of the

WIT241x radio. Since the WIT241x operates in a star configuration in multipoint mode,

only the base radio needs to address data to specific remotes. All remotes send data back

to the base and do not need to address the data to the base. To send a packet of data to a

specific remote in a multipoint network, enter the handle of the desired remote in the

Handle window. Type whatever data to be transmitted in the Data to Transmit window.

In the bottom window, you will see the entire packet being built as the data is entered in

the windows. When all the data has been entered, click on the Transmit button to send the

data.

WinCOM has the ability to perform any function or sequence of functions WinCOM can

perform through a script file. A script file is a text file that contains one or more

commands and arguments save with a wcr filename extension. Each command is

separated by a carriage return and linefeed. Configuration commands need to have wait

periods between them. The list of commands and their definitions is below: