User's Manual

WLAN61xxEB CF EVK User’s Guide
SyChip Confidential Page 10 of 29 SyChip WLAN61xxEB CF EVK
4.3.3 Advanced Connections
Click on Settings link, and select Advanced tab. You will see the following screen. Alternatively, you can
follow Start->Settings->Connections->Connections icon ->Advanced Tab to get to the same screen, as
shown by Figure 6.
A list of Access Points and their connectivity/availability status will appear on the screen
Figure 6 Configure Wireless Networks
4.3.4 WEP Key Entry
Click on the AP you want to connect to, a configuration screen will appear. Then select the Network Key
tab. See Figure 7.
If WEP is enabled on the AP, from the Data Encryption drop-down list, select “WEP”. Now you need to
obtain the WEP key and key index from your network administer, put the key string in the textbox labeled
“Network key”, and select the Key index from the choice box (the default key index is 1). If WEP is not
enabled, select “Disabled” from the Data Encryption drop down list. Click on OK to return to the previous
screen (Figure 6).