User's Manual

WLAN61xxEB CF EVK User’s Guide
SyChip Confidential Page 20 of 29 SyChip WLAN61xxEB CF EVK
4.4.2.3 Profile Settings Window
4.4.2.3.1 Network Profile Window
Figure 19 Network profile window
To create a new profile to the preferred list one can click the New button (described in Section 4.4.2.1)
without selecting (highlighting) any existing profile. An Add New Preferred SSID window will pop up as
shown in Figure 19.
To modify a profile one can select (highlight) a profile and click the Edit button. A Modify Existing
Preferred SSID window will pop up as shown in Figure 19, except that the SSID, Type, TX Rate, and
Channel fields are unchangeable in AP mode, whereas TX Rate and Channel fields can be changed in
Peer-to-Peer mode.
The information fields and operation buttons are listed as follows:
• SSID: Enter the Network Name of the access point or peer station of your choice. Check with
your network administrator for Network Name (SSID).
• Description: Any description on this network.
• Network Type: Choose from Peer-to-Peer or Access Point in the pull down menu. Access Point
(AP) mode is also called “Infrastructure” mode. Peer-to-Peer (P2P) mode is used for
communication between two (or more) radio stations (cards) without an access point.
• Channel: Channel. Scroll to select a channel for communication.
• Tx Rate: Choose 1Mb, 2 Mb, Auto 1/2 Mb, 5.5 Mb, 11 Mb for P2P connection, or Fully Auto for
AP connections from the menu. The transmit rate is Fully Automatic by default.