User's Manual

WLAN61xxEB CF EVK User’s Guide
SyChip Confidential Page 25 of 29 SyChip WLAN61xxEB CF EVK
o IP Address/Host Name: Enter an IP address or host name to ping. When a host address
(eg. www.yahoo.com) is entered, the Resolve target name box needs to be checked.
o Timeout for each reply (ms): Default is 2000, can be increased or decreased from the spin
button.
o Maximum number of hops: Default is 10, can be increased or decreased from the spin
button.
o Resolve target name: Check it if a host name is entered. This allows the software to
translate host address to IP address.
o Trace: Click on this button to start trace.
o Trace Statistics Field: Shows the trace IP addresses/domain names and the pinging
results. * means timeout for that ping.
Figure 24 Trace Function
• Config – Configure static IP address.Use server-assigned IP address is the default setting. If
static IP is desired, this page should be used to configure it. Check Use static IP address and
enter related information.