User's Manual

WLAN61xxEB CF EVK User’s Guide
SyChip Confidential Page 6 of 29 SyChip WLAN61xxEB CF EVK
2 Evaluation Kit Contents
The WLAN61xx EB CF EVK package contains the following contents:
1
• A test board with antennas and a WLAN61xx EB CF embedded module
• Two 1” coaxial cable jumper ended with Hirose W.FL plugs for the RF connections from the
module to the antennas
• A WLAN61xx EB CF module driver software and documentation CDROM
Figure 1 61xx CF EVK (actual layout may vary)
3 Supported Evaluation Environment
3.1 System Connection
The following figure displays the WLAN61xx EB EVK setup connection to a host device.
WLAN61xx EB CF test board
Figure 2 WLAN61xxEB CF EVK setup connection
3.2 Devices and Operating Systems
The WLAN61xxEB CF embedded module has been qualified by SyChip Inc to support the following
devices:
• Win CE4.2/Pocket PC2003 and Win CE.Net 5.0 with CF interface.
Note: This evaluation card does not represent a reference design for the WLAN61xxEB modules. For
detailed hardware design and timing considerations, contact SyChip customer support.
1
Based on the customer request, the contents may change.
WLAN61xxEB CF
Host Device
(PDA)
CF I/F
A
n
t
e
n
n
a