User's Manual

Configuring the Network
Flexible Power Management
You can place the transceiver module in a power-save mode, which enables smart
power management. Smart power management allows a remote unit to drop into a
lower current standby mode during transmission or receiving gaps.
This feature also allows Hopnet products to be used in various countries where the
output power requirements may vary due to regulation.
Advanced Features
HopNet modems have many advanced features:
• Employ frequency hopping technology with up to 79 channels in the 2402 to
2480 MHz frequency range
• Support RS-232 interface
• Use transparent ARQ protocol
• Use same hardware for all supported data rates
• Supports up to 115 Kbps asynchronous data rates
• Full Duplex operation
• Store setup configuration in nonvolatile memory (FLASH)
• Fast acquisition – less than 2 seconds is the typical time to acquire hopping
pattern
• Smart power management features
The HopNet Family of Products
The HopNet family consists of the following products:
HopNet 110 7