User Manual
Table Of Contents
Page 70 of 90
CCT24
from the keyboard, and then pressing the Apply Changes button. Note that Bank 1 holds configuration
parameters for the base only except for ARQ_Mode, which applies to both the base and the remotes.
Figure 5.6.2.4
Figure 5.6.2.4 shows the Status tab contents, corresponding to Bank 2. Note the Status tab contains
read-only parameters.
Figure 5.6.2.5
Figure 5.6.2.5 shows the Serial tab contents corresponding to Bank 3. The values shown are the defaults
for serial port operation.