User Manual
Table Of Contents
Page 80 of 90
CCT24
The multi-tab Configuration window is accessed by clicking on its Config button. The data presented on
the first six tabs corresponds to configuration register Banks 0 through 5 as discussed in Section 4.2
above, with the data on the next two tabs corresponding to configuration register Bank 6, the data on the
next tab corresponding to Bank 7, the data on the following two tabs corresponding to Bank 8, and the
data on the last tab corresponding to Bank 9.
Figure 5.7.7
The Configuration window in the DNT Wizard is identical the Configuration window in the DNT Demo. See
Figures 5.6.2.2 through 5.6.2.13 for Configuration window details.