User's Manual

28 April 2016

2.Antenna

■Please perform the antenna design that followed the specifications of the antenna.

The concrete contents of a check are the following three points.

１）It is the same type as the antenna type of antenna specifications.

Confirm the same size as the Gerber file.

２）An antenna gain is lower than a gain given in antenna specifications.

Measure the gain, and confirm the peak gain is less than the application value (1.4dBi)

３）The emission level is not getting worse.

Measure the spurious, and confirm degradation of less than 3dB than spurious value of

worst of report used for the application. However it is spurious defined below.

Please send those reports to Murata.