Datasheet

NMJ Series
5.2kVDC Isolated 1W DC/DC Converters
KDC_NMJ.G06 Page 6 of 6
www.murata-ps.com/support
Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other
technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply
the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without
notice. © 2014 Murata Power Solutions, Inc.
Murata Power Solutions, Inc.
11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A.
ISO 9001 and 14001 REGISTERED
This product is subject to the following operating requirements
and the
Life and Safety Critical Application Sales Policy:
Refer to:
http://www.murata-ps.com/requirements/
PACKAGE SPECIFICATIONS
MECHANICAL DIMENSIONS
PIN CONNECTIONS
Dual Output Single Output
Pin Function Pin Function
1+VIN 1+VIN
2-VIN 2-VIN
5-VOUT 5-VOUT
6OV
7+V
OUT
7+VOUT
RECOMMENDED FOOTPRINT DETAILS
TUBE OUTLINE DIMENSIONS
Weight: 4.3g
6.00
(0.236)
5.00 (0.197)
5.20 (0.205)
1.50 (0.059)
0.006±0.024
(0.15±0.60)
14.20 (0.559)
2.54 (0.1)
x5 HOLES Ø
0.10 (0.004)
1.15 (0.045)
1.00 (0.039)
2.54 (0.1)
*
Unless otherwise stated all dimensions in mm ±0.5mm (inches ±0.02).
Tube length : 525mm±2mm (20.669±0.079).
Tube Quantity : 25
19.50 (0.77)
4.60 (0.18)
3.60 (0.14)
12.50 (0.49)
9.80
(0.39)
2.54 (0.1)
0.55 (0.022)
0.45 (0.018)
0.55 (0.022)
0.45 (0.018)
0.30 (0.012)
0.20 (0.008)
1.88±0.75 (0.074±0.03)
2.40 (0.094)
1
2
5
6*
7
All dimensions in mm ±0.25mm (inches ±0.01). All pins on a 2.54 (0.1) pitch and within
±0.25 (0.01) of true position.
* Pin not fitted on single output variants.
* Hole not required for single output variants.
All dimensions in mm ±0.25mm (inches ±0.01).