Installation Instructions

Installing the pet door with installation adaptors

This installation method is necessary only if you previously installed the pet door and found that the metal in your door interfered

with the operation of the sensor.

To install the pet door with the installation adaptors, you will need:

• Installation adaptors (2)

• Spacer (Included)

• Small screws (4) (Included)

• Cutting template for installation

adaptor (Included)

• Measuring tape

• Pencil

• Level

• Hammer

• Screwdriver

• A raised level surface, such as two

sawhorses

• Tape

• Safety glasses

• Drill and 1/2-inch drill bit

• Jigsaw

• Phillips screwdriver

• Weather Stripping (optional)

• Caulk (optional)

Special Note: Installation Adapter Screw Positions

Installation Screw

Guides used with all

installation types.

Installation Screw

Guides for Wall

Installations only.