Installation Instructions

3
Connect the pet door to Wi-Fi and pair it to your pet
Before beginning the installation process, complete the following steps to connect the pet door to Wi-Fi and pair it with all the pets
who will be using it. You will need a valid email address and your home Wi-Fi password.
3. Place the interior frame of the pet door (the side with the flap) as near as possible to the location where you plan to install it,
leaning against a wall or cabinet in an upright position.
Locate the battery door on the top edge of the pet door.
4. Remove the battery door by sliding it in the direction of the arrow.
5. Insert the batteries (4 C cell alkaline batteries for the Medium pet door, 4 D cell alkaline batteries for the Large pet door) and
then replace the battery door.
The Wi-Fi icon ( ) on the front of the pet door will start flashing yellow.
6. Download the MyPetSafe® app from your phone’s app store.
7. Open the app and follow the on-screen instructions to:
• Sign in to the app.
• Add the SmartDoor™ to the app.
• Create a pet profile for each pet that will use the SmartDoor™.
• Add each pet to the SmartDoor™ by scanning their SmartKey™ or microchip.
Pet Pairing Tip: During the pairing process, move the SmartKey™ or pet a little to ensure the activation of the motion sensor.
Battery door
Battery compartment