Manualshelf

Installation Instructions

ManualsBrandsMURATA ManualsElectronicsThis electronic pet door is designed to allow the pet access to go outside when needed without assistance
12345678910
6
3. Tape the selected cutting template to the interior side of the door, matching the shoulder and center lines on the template with
the horizontal and vertical lines you drew on the door.
Make sure the cutting template is at least 3 inches from the edge of the door on all sides, and that there is nothing underneath
or behind the door where you will cut the opening.
Cut the opening
1. Drill 1/2-inch holes just inside the corners of the cutting line on the template.
These will be the pilot holes for the jigsaw blade.
Non-metal door
Metal door
Non-metal door
Metal door