Manualshelf

Installation Instructions

ManualsBrandsMURATA ManualsElectronicsThis electronic pet door is designed to allow the pet access to go outside when needed without assistance
12345678910
8
2. Insert the exterior frame into the opening on the exterior side of the door, fitting it over the tunnel of the interior frame. Hold
the exterior frame in place and mark the holes for the screws with a pencil.
3. Remove the exterior and interior frames.
4. Drill through the marks on the door using an 8mm drill bit. Hold the drill steady and straight.
5. Place the interior and exterior frames back in the opening. Holding both frames in place, insert screws through the holes in the
exterior frame, through the holes in the door and into the holes on the back of the interior frame.
The pet door came with two lengths of screws; choose the screws that best fit the thickness of your door.
6. Tighten the screws with a manual Phillips screwdriver. Do not overtighten.
7. Insert blanking plugs into the holes in the exterior frame.