Datasheet
!Note
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
C31E.pdf
Mar.28,2011
Chip Ferrite BeadChip EMIFILr
Chip Common Mode Choke Coil
Block Type EMIFILr
Power Lines Type
32
0402 size for power lines.
BLM15PG
/
BLM15PDSeries (0402 Size)
BLM Series Power Lines Type Chip Ferrite Bead
■ Dimensions ■ Equivalent Circuit
■ Packaging
■ Impedance-Frequency Characteristics (Main Items)
■ Rated Value (p: packaging code)
Continued on the following page.
Refer to pages from p.91 to p.94 for mounting information.
BLM15PG/BLM15PD
*Please refer to the products which are designed for both power lines and signal lines.
■ Notice (Rating)
Code Packaging
Minimum
Quantity
D 180mm Reel Paper Tape 10000
J 330mm Reel Paper Tape 50000
B Bulk(Bag) 1000
Part Number
Impedance
(at 100MHz/20°C)
Rated Current DC Resistance
Operating
Temperature Range
BLM15PG100SN1p 10ohm(Typ.) 1000mA 0.05ohm max. -55°C to +125°C
BLM15PD300SN1p 30ohm±25% 2200mA 0.035ohm max. -55°C to +125°C
BLM15PD600SN1p 60ohm±25% 1700mA 0.06ohm max. -55°C to +125°C
BLM15PD800SN1p 80ohm±25% 1500mA 0.07ohm max. -55°C to +125°C
BLM15PD121SN1p 120ohm±25%
1300mA 0.09ohm max. -55°C to +125°C
Number of Circuits: 1
0.5±0.05
0.5±0.05
1.0±0.05
0.25±0.1
(in mm)
: Electrode
Impedance (Ω)
Frequency (MHz)
1 10 100 1000 3000
0
50
100
150
200
250
BLM15PG100SN1
BLM15PD600SN1
BLM15PD800SN1
BLM15PD121SN1
BLM15PD300SN1
(Resistance element becomes dominant
at high frequencies.)
In operating temperature exceeding +85°C,
derating of current is necessary for
BLM15PD series.
Please apply the derating curve shown in
chart according to the operating
temperature.
Derating
Derated Current [A]
Operating Temperature [°C]
125
85
1.3
1.7
2.2
1.4
1.1
0.9
3.0
2.5
2.0
1.5
1.0
0.5










