Datasheet

ManualsBrandsMURATA ManualsHF & EMC ComponentsSMD ferrite bead 470 Ω (L x W x H) 0.6 x 0.3 x 0.3 mm 15000 pc(s)

Data Sheet

Note:

1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s speciﬁ cations are subject to change or our products in it

may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.

2. This datasheet has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please approve our product

speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

http://www.murata.com/

Noise Suppression Products/EMI Suppression Filters > EMIFIL

(Inductor type) > Chip Ferrite Bead for GHz Noise

2014.3.10

This data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.

EMIFIL

(Inductor type)

Chip Ferrite Bead for GHz Noise

BLM03H Series (0201 Size)

Dimensions

0.6±0.03 0.3±0.03

0.3±0.03

0.15±0.05

(in mm)

: Electrode

Equivalent Circuit

(Resistance element becomes dominant

at high frequencies.)

Packaging

Code Packaging Minimum Quantity

180mm Paper Tape 15000

330mm Paper Tape 50000

Bulk(Bag) 1000

Rated Value (

: packaging code)

Part Number

Impedance

(at 100MHz/20°C)

Impedance

(at 1GHz/20°C)

Rated Current DC Resistance

Operating

Temperature Range

BLM03HG601SN1

600ohm ±25% 1000ohm ±40% 150mA 1.6ohm max. -55 to +125°C

BLM03HG102SN1

1000ohm ±25% 1800ohm ±40% 125mA 2.6ohm max. -55 to +125°C

BLM03HG122SN1

1200ohm ±25% 2000ohm ±40% 100mA 3.5ohm max. -55 to +125°C

BLM03HD331SN1

330ohm ±25% 750ohm ±40% 200mA 1.0ohm max. -55 to +125°C

BLM03HD471SN1

470ohm ±25% 1000ohm ±40% 175mA 1.3ohm max. -55 to +125°C

BLM03HD601SN1

600ohm ±25% 1500ohm ±40% 150mA 1.7ohm max. -55 to +125°C

BLM03HD102SN1

1000ohm ±25% 2300ohm ±40% 120mA 2.9ohm max. -55 to +125°C

BLM03HB191SN1

190ohm ±25% 1150ohm ±40% 150mA 2.0ohm max. -55 to +125°C

Number of Circuits: 1

Continued on the following page.

Summary of content (4 pages)

PAGE 1
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead for GHz Noise Data Sheet 1 EMIFILr (Inductor type) Chip Ferrite Bead for GHz Noise BLM03H Series (0201 Size) c Dimensions c Equivalent Circuit 0.3±0.03 0.3±0.03 0.6±0.03 0.15±0.05 (Resistance element becomes dominant at high frequencies.
PAGE 2
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead for GHz Noise Data Sheet 2 Continued from the preceding page.
PAGE 3
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead for GHz Noise Data Sheet 3 Continued from the preceding page.
PAGE 4
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead for GHz Noise Data Sheet 4 Continued from the preceding page. c !Caution/Notice !Caution (Rating) Do not use products beyond the rated current as this may create excessive heat and deteriorate the insulation resistance. Notice Solderability of Tin plating termination chip might be deteriorated when low temperature soldering profile where peak solder temperature is below the Tin melting point is used.