Datasheet

Chip Ferrite BeadChip EMIFILr
Chip Common Mode Choke Coil
Block Type EMIFILr
Microwave Absorber
!Note
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C31E.pdf
09.4.20
167
Low profile version of BNX series.
BNX01pSeries
BNX Series Block Type EMIFILr
■ Dimensions ■ Equivalent Circuit
■ Packaging
■ Insertion Loss Characteristics
■ Rated Value
■ Notice (Rating)
Refer to pages from p.170 to p.173 for mounting information.
Code Packaging Minimum Quantity
- Box 150
Part Number Rated Voltage Withstand Voltage Rated Current
Insulation Resistance
(min.)
Insertion Loss
(20 to 25 degrees C line impedance=50 ohm)
BNX012-01 50Vdc 125Vdc 15A 500M ohm 1MHz to 1GHz:40dB min.
BNX016-01 25Vdc 62.5Vdc 15A 50M ohm 100kHz to 1GHz:40dB min.
Operating Temperature Range: -40°C to +125°C
12.0±0.2
8.0±0.5
4.0±0.5
2.5±0.2
0.6
±0.1
ø0.8
±0.1
ø0.8
±0.1
0.8
±0.1
0.8
±0.1
2.5±0.2
7.5±0.2
11.0±0.2
12.0±0.5
3.2±0.5
BNX***
*** : 012/016
(in mm)
PSG: Power supply ground
CG: Load circuit ground
CB: Load circuit + Bias
CG
CB
CG
B
PSG
Frequency (MHz)
Insertion Loss (dB)
(50Ω - 50Ω)
80
100
60
40
20
0
0.001 0.01 0.1 1 10 100 1000
BNX012-01
BNX016-01
In operating temperatures exceeding
+85°C, derating of current is necessary for
BNX01p series. Please apply the derating
curve shown in chart according to the
operating temperature.
15
10
5
0
1
85-40 125102.5 120
Operating Temperature [°C]
Derated Current [A]
Derating
" Connecting ± power line
In case of using ± power line, please
connect to each terminal as shown.
Power Supply
(BNX Input)
CircuitBNX
PSG
B
CG
CB
PSG
B
CG
CB
Power Supply Ground
Power Supply +Bias
Power Supply Ground
Power Supply -Bias
(BNX Output)
Load Circuit Ground
Load Circuit +Bias
Load Circuit Ground
Load Circuit -Bias
L2
C2
L1 L3
C1
B
PSG
CB
CG
(1)-(4): Terminal Number
PSG: Power Supply Ground
CG: Circuit Ground
CB: Circuit+B
(1)
(2)
(3)
(4)