Datasheet

Chip Ferrite BeadChip EMIFILr
Chip Common Mode Choke Coil
Block Type EMIFILrMicrowave Absorber
!Note
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C31E.pdf
09.4.20
142
03025 size, very small chip common mode choke coil, Cut-off frequency 3GHz max.
DLP0NSSeries (03025 Size)
DLP Series Chip Common Mode Choke Coil
Dimensions Equivalent Circuit
Packaging
Impedance-Frequency Characteristics (Main Items)
Rated Value (p: packaging code)
Differential Mode Transmission Characteristics (Typ.)
Refer to pages from p.155 to p.158 for mounting information.
Code Packaging
Minimum
Quantity
L
180mm Reel Embossed Tape
5000
B Bulk(Bag) 500
Operating Temperature Range: -40°C to +85°C Number of Circuit: 1 HD: for high speed differential signal lines UD: for ultra high speed differential signal lines
Part Number
Common Mode Impedance
(at 100MHz/20°C)
Rated Current Rated Voltage
Insulation
Resistance
(min.)
Withstand Voltage DC Resistance
DLP0NSN670HL2p 67ohm±20% 110mA 5Vdc 100M ohm 12.5Vdc 2.4ohm±25%
DLP0NSN900HL2p 90ohm±20% 100mA 5Vdc 100M ohm 12.5Vdc 3.0ohm±25%
DLP0NSN121HL2p 120ohm±20% 90mA 5Vdc 100M ohm 12.5Vdc 3.8ohm±25%
0.27±0.1
0.45±0.05
0.85±0.05
0.65±0.05
(2)
(3)
(1)
(4)
0.5±0.1
0.20
+0.05
–0.10
(in mm)
: Electrode
Impedance ()
Frequency (MHz)
1 10 100 1000 10000
1
10
100
1000
10000
Differential mode
Common mode
DLP0NSN121HL2
DLP0NSN900HL2
DLP0NSN670HL2
DLP0NSN670HL2
DLP0NSN900HL2
DLP0NSN121HL2
Frequency (MHz)
Insertion Loss (dB)
0
2
4
6
8
10
1 10 100 1000 10000
DLP0NSN900HL2
(1)
(4)
(2)
(3)
No polarity.