Datasheet

Chip Ferrite BeadChip EMIFILr
Chip Common Mode Choke Coil
Block Type EMIFILrMicrowave Absorber
!Note
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C31E.pdf
09.4.20
147
2 circuit built-in, 1206 size, meet IEEE1394,USB,LVDS.
DLP31DSeries (1206 Size)
DLP Series Chip Common Mode Choke Coil
■ Dimensions ■ Equivalent Circuit
■ Packaging
■ Impedance-Frequency Characteristics (Main Items)
■ Rated Value (p: packaging code)
Refer to pages from p.155 to p.158 for mounting information.
Code Packaging
Minimum
Quantity
L 180mm Reel Embossed Tape 3000
B Bulk(Bag) 500
Operating Temperature Range: -40°C to +85°C Number of Circuit: 2 HD: for high speed differential signal lines UD: for ultra high speed differential signal lines
Part Number
Common Mode Impedance
(at 100MHz/20°C)
Rated Current Rated Voltage
Insulation
Resistance
(min.)
Withstand Voltage DC Resistance
DLP31DN900ML4p 90ohm±20% 160mA 10Vdc 100M ohm 25Vdc 1.1ohm max.
DLP31DN131ML4p 130ohm±20% 120mA 10Vdc 100M ohm 25Vdc 1.6ohm max.
DLP31DN201ML4p 200ohm±20% 100mA 10Vdc 100M ohm 25Vdc 2.2ohm max.
DLP31DN321ML4p 320ohm±20% 80mA 10Vdc 100M ohm 25Vdc 3.5ohm max.
DLP31DN441ML4p 440ohm±20% 70mA 10Vdc 100M ohm 25Vdc 4.3ohm max.
0.4±0.2
1.15±0.15
3.2±0.15
0.3±0.2
1.6±0.15
0.8±0.1
(5) (6)
(7)
(8)
(1) (2) (3) (4)
(in mm)
: Electrode
Impedance (Ω)
Frequency (MHz)
1
10
100
1000
10000
1 10 100 1000
Common mode
Differential mode
DLP31DN201ML4
DLP31DN131ML4
DLP31DN900ML4
DLP31DN441ML4
DLP31DN441ML4
DLP31DN321ML4
DLP31DN201ML4
DLP31DN131ML4
DLP31DN900ML4
DLP31DN321ML4
(1)
(5) (6) (7) (8)
(2) (3) (4)
No polarity.