Datasheet

Chip Ferrite BeadChip EMIFILr
Chip Common Mode Choke Coil
Block Type EMIFILrMicrowave Absorber
!Note
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C31E.pdf
09.4.20
59
1806 size for power lines.
BLM41PSeries (1806 Size)
BLM Series Chip Ferrite Bead
Dimensions Equivalent Circuit
Packaging
Impedance-Frequency Characteristics (Main Items)
Rated Value (p: packaging code)
Continued on the following page.
Notice (Rating)
Refer to pages from p.82 to p.85 for mounting information.
Code Packaging
Minimum
Quantity
L
180mm Reel Embossed Tape
2500
K
330mm Reel Embossed Tape
8000
B Bulk(Bag) 1000
Part Number
Impedance
(at 100MHz/20°C)
Rated Current
DC Resistance
(max.)
Operating
Temperature Range
BLM41PG600SN1p 60ohm(Typ.) 6000mA 0.01ohm -55°C to +125°C
BLM41PG750SN1p 75ohm(Typ.) 3000mA 0.025ohm -55°C to +125°C
BLM41PG181SN1p 180ohm±25% 3000mA 0.025ohm -55°C to +125°C
BLM41PG471SN1p 470ohm±25% 2000mA 0.05ohm -55°C to +125°C
BLM41PG102SN1p 1000ohm±25% 1500mA 0.09ohm -55°C to +125°C
Number of Circuits: 1
0.7±0.3
4.5±0.2 1.6±0.2
1.6±0.2
(in mm)
: Electrode
Impedance ()
Frequency (MHz)
1 10 100 1000 3000
0
50
100
150
200
250
BLM41PG181SN1
BLM41PG600SN1
BLM41PG750SN1
BLM41PG Series
Impedance ()
Frequency (MHz)
1 10 100 1000 3000
1200
900
600
300
0
BLM41PG102SN1
BLM41PG471SN1
BLM41PG Series
In operating temperature exceeding +85°C,
derating of current is necessary for
BLM41PG series.
Please apply the derating curve shown in
chart according to the operating
temperature.
Derating
Operating Temperature [°C]
Derated Current [A]
85 125
0
1
2
3
1.5
4
5
6
(Resistance element becomes dominant
at high frequencies.)