Datasheet
Continued from the preceding page.
http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2
o This data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
2006.3.9
In operating temperatures exceeding +85D, derating of
current is necessary for chip Ferrite Beads for which rated
current is 1500mA or over. Please apply the derating curve
shown in chart according to the operating temperature.
[Derating]
85 125
Operating Temperature [D]
0
1
2
3
4
5
6
6A
3A
1.5A
2A
2.5A
4A
1.4A
1.2A
1A
Derated Current [A]
100
75
50
25
0
1 10 100 1000
Frequency (MHz)
Impedance (Ω)
Z
R
X
100
75
50
25
0
1 10 100 1000
Frequency (MHz)
Impedance (Ω)
Z
R
X
Noise Suppression Products/EMI Suppression Filters > Chip EMIFILr Inductor Type > Chip Ferrite Beads
■ Notice (Rating)
■ Impedance-Frequency Characteristics
BLM41PG600SN1
■ Impedance-Frequency Characteristics
BLM41PG750SN1
Continued on the following page.