Specification No. JCPY1-0037A SPECIFICATION Date： 2010/07/06 Product Description：Polymer Aluminum Electrolytic Capacitor Murata Part Number：ECAS series For Reference Issue Section Company Name Murata Manufacturing Co.,Ltd. Polymer Capacitor Planning & Sales Promotion Sec. Polymer Device Dept. Device Business Unit 0F082B (Y15) Mgr. Shuji Eng. Kinya Murata Manufacturing Co.,Ltd.
Specification No.JCPY1-0037A 2/14 Contents ＜ No. & Items ＞ ＜page＞ 1. Scope････････････････････････････････････････････････ 3 2. Part Number Description･･･････････････････････････････ 3 3. Descriptions･･･････････････････････････････････････････ 3 3-1 Dimensions 3-2 Rated Voltage 3-3 Capacitance 3-4 Capacitance Tolerance 3-5 ESR 3-6 Packing 4. Part Number and Minimum Packaging Quantity･･････････ 4-1 Part Numbers and Standards 4-2 Minimum Packaging Quantity 5 5.
Specification No.JCPY1-0037A 1. 3/14 Scope These specifications are applied to Polymer Aluminum Electrolytic Capacitor for electronic equipment use. Please contact us beforehand when you use it besides this use. 2. Part Number Description E C A S ① ② ③ ④ ⑤ ⑥ ①Series ：ECAS ②Dimensions ：See 3.1 ③Rated Voltage ：See 3.2 ④Capacitance ：See 3.3 ⑤Capacitance Tolerance ：See 3.4 ⑥ESR ：See 3.5 ⑦Packing ：See 3.6 ⑧Individual Specification Code ：Murata management Code 3. ⑦ ⑧ Descriptions 3.
Specification No.JCPY1-0037A 3.2 Rated Voltage Code 0D 0G 0J 1A 1B 1C 3.3 4/14 Voltage 2V 4V 6.3V 10V 12.5V 16V Capacitance These code are shown by three figures, the 1st and the second figure show the significant digit of the nominal capacitance, and the third figure shows the number of “0” following the significant digit. Code 476 107 227 477 3.4 Capacitance Tolerance Code M 3.5 Tolerance ±20％ ESR Code 006 010 055 3.
Specification No.JCPY1-0037A 4. 5/14 Part Number and Minimum Packaging Quantity 4.1 Part Numbers and Standards Part Number(Murata) Rated Cap. Voltage (μF) (V.DC) Cap Tol. (%) Case Size ESR (mΩ) 100KHz/ +25℃ Leakage Current (μA) Ripple Current (Arms) 100KHz ECASD40D107M016K00 2 100 ±20 D4 16 8.0 2.0 ECASD40D157M009K00 2 150 ±20 D4 9 12.0 3.0 ECASD40D227M009K00 2 220 ±20 D4 9 17.6 3.0 ECASD60D337M007K00 2 330 ±20 D6 7 26.4 3.
Specification No.JCPY1-0037A Part Number(Murata) 6/14 Rated Cap. Voltage (μF) (V.DC) Cap Tol. (%) Case Size ESR (mΩ) 100KHz/ +25℃ Leakage Current (μA) Ripple Current (Arms) 100KHz ECASD41A106M055K00 10 10 ±20 D4 55 4.0 1.0 ECASD41A226M028K00 10 22 ±20 D4 28 8.8 1.6 ECASD41A336M025K00 10 33 ±20 D4 25 13.2 1.8 ECASD61A686M015K00 10 68 ±20 D6 15 27.2 2.0 ECASD91A107M010K00 10 100 ±20 D9 10 40.0 3.0 ECASD91A157M010K00 10 150 ±20 D9 10 60.0 3.
Specification No.JCPY1-0037A 4-2 Minimum Packaging Quantity Case Size D4 D6 D9 5. 7/14 Minimum Packaging Quantity(pcs) 3,000 2,500 2,000 Markings Capacitance Code (3 digits) Polarity indicator bar (+) Code 476 107 227 477 Rated Voltage (2 digits) Code 0D 0G 0J 1A 1B 1C 6. Voltage 2V 4V 6.3V 10V 12.
Specification No.JCPY1-0037A No. 7 Item Characteristics More than 95% of each terminal face is covered by new solder Solderability Leakage Current 8 9 Moisture resistance under no bias Moisture resistance under load Capacitance Change Dissipation Factor Leakage Current Capacitance Change Dissipation Factor Appearance Leakage Current 11 Endurance Capacitance Change Dissipation Factor Appearance Leakage Current Capacitance Change Dissipation Factor 12 ≦0.
Specification No.JCPY1-0037A 7. 9/14 Packaging 7.1 Carrier Tape Configuration and Dimension Case Code "D4" (mm) D E P0 T F D1 P2 Dimension 1.50 1.75 4.00 0.229 5.50 1.50 2.00 Allowance +0.10 -0 ±0.10 ±0.10 ±0.05 ±0.05 ±0.25 -0 ±0.05 W P A0 B0 K0 Cumulative Pitch Dimension 12.00 8.00 4.60 7.60 2.16 40.00 Allowance +0.3 -0.1 ±0.10 ±0.10 ±0.10 ±0.10 ±0.20 E P0 T F (mm) Case Code "D6" D D1 P2 Dimension 1.50 1.75 4.00 0.267 5.50 1.50 2.
Specification No.JCPY1-0037A 7.3 10/14 Taping Leader Tape has a leader and a trailer as described below. 7.4 Reel Configuration and Dimension Tape with capacitors is wound in a reel as described below. (mm) Reel size Tape width A B C D N W2 W3 Φ330 12 330.0MAX 3.0±0.18 13.0±0.2 11.9±0.1 100.0±1.0 17.5±1.0 13.5±1.5 7.
Specification No.JCPY1-0037A 7.6 11/14 Moisture Proof Aluminum Laminated Bag Packaging A reel of the products is packaged in a moisture proof aluminum laminated bag and labels are put on the bag as shown below. One desiccant and a humidity indicator are put on the backside of the reel before slightly drawing the vacuum and sealing the bag. Seal ①Shipping Label 400 ②Explanatory Label of bag Unit: mm 400 Note) The size of the Moisture Proof Aluminum Laminated Bag is a rough value. 7.
Specification No.JCPY1-0037A 12/14 Caution 9.2 Storage Condition ＜1＞Term of warranty for this product is two years after packaging in a moisture-proof bag, under the conditions below with sealed packaging. Recommended storage environment: Room temperature: 5-30 degree Humidity: no more than 60%RH ＜2＞Polymer aluminum electrolytic capacitors should be stored in a dry atmosphere, avoiding direct sunlight and condensation.
Specification No.JCPY1-0037A 13/14 Caution Cautions for Use ＜1＞Polarity Polymer aluminum electrolytic capacitor is polarized. Please not to reverse the polarity when using. If reverse voltage is applied, it may damage the oxide film and the capacitor itself. Please verify the orientation of the capacitor before use in accordance with the drawing of ”Markings” in Item 5. ＜2＞Allowable Ripple Current Please not to apply ripple current exceeding the allowable value specified in the standards in Item 4.1.
Specification No.JCPY1-0037A 14/14 ③Please refer to figure below for designing land pattern. ＜4＞Export This capacitor falls into the cargo specified in section 16 in the attachment List No. 1 to Export Trade Control Ordinance, Foreign Exchange and Foreign Trade Control Law when shipped from Japan. ＜5＞Disposal Polymer aluminum electrolytic capacitors should be disposed of as industrial waste in accordance with laws. 10. Proposal ①When you use, please evaluate in a state mounted by your product.
