User's Manual

17 October 2019

Notice

Compliance with FCC requirement 15.407(c)

Data transmission is always initiated by software, which is the passed down through the MAC, through the digital and

analog baseband, and finally to the RF chip. Several special packets are initiated by the MAC. These are the only ways

the digital baseband portion will turn on the RF transmitter, which it then turns off at the end of the packet. Therefore,

the transmitter will be on only while one of the aforementioned packets is being transmitted. In other words, this device

automatically discontinue transmission in case of either absence of information to transmit or operational failure.

Frequency Tolerance: ± 20ppm