Installation Manual

ManualsBrandsMURATA ManualsElectronicsCommunication Module

29 November 2019

Type1PS Installation Manual

FCC ID of this product is as follows.

FCC ID:VPYLB1GC

For OEM integration only – device cannot be sold to general public.

Therefore we will ask OEM to include the following statements required

by FCC on the product and in the Installation manual Notice.

Contents

1.Supply Voltage

2.Theory of operation

3.Antenna

4.Notice

Confidential

Summary of content (7 pages)

PAGE 1
Confidential Type1PS Installation Manual FCC ID of this product is as follows. FCC ID:VPYLB1GC For OEM integration only – device cannot be sold to general public. Therefore we will ask OEM to include the following statements required by FCC on the product and in the Installation manual Notice. Contents 1.Supply Voltage 2.Theory of operation 3.Antenna 4.Notice Copyright © Murata Manufacturing Co., Ltd. All rights reserved.
PAGE 2
Confidential 1.Supply Voltage min. typ. max. unit Specification Temperature Range -40 +25 +85 deg.C Specification Voltage 3.13 3.6 4.8 V Copyright © Murata Manufacturing Co., Ltd. All rights reserved.
PAGE 3
Confidential 2. Theory of Operation Frequency of operation Scan Ad-hoc mode 2.
PAGE 4
Confidential 3.Antenna ■Please refer to KDB 996369 ■Please perform the antenna design that followed the specifications of the antenna. ■About the signal line between an antenna and a module It is a 50-ohm line design. Fine tuning of return loss etc. can be performed using a matching network. However, it is required to check "Class1 change" and "Class2 change" which the authorities define then. The concrete contents of a check are the following three points.
PAGE 5
Confidential 4. Notice For OEM integration only – device cannot be sold to general public. Therefore we will ask OEM to include the following statements required by FCC/IC on the product and in the Installation manual Notice. Please describe the following warning on the final product which contains this module. Contains Transmitter Module FCC ID:VPYLB1GC or Contains FCC ID:VPYLB1GC ●Please describe the following warning to the manual. This device complies with part 15 of the FCC Rules.
PAGE 6
Confidential 4. Notice ●When installing it in a mobile equipment. Please describe the following warning to the manual. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment should be installed and operated keeping the radiator at least 20cm or more away from person’s body. RF Exposure requirements are met when installed in mobile equipment.
PAGE 7
Confidential 4. Notice This device is intended only for OEM integrators under the following conditions: 1)The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2)The transmitter module may not be co-located with any other transmitter or antenna. 3)The use of an antenna with gain less than 1.2 dBi(2.4GHz) and 2.5 dBi(5GHz). As long as 3 conditions above are met, further transmitter test will not be required.