Datasheet

ManualsBrandsMURATA ManualsCoils & ChokesInductor SMD 1210 22 µH 0.25 A 1 pc(s)

!Note

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

O05E.pdf

Oct.13,2011

Summary of content (186 pages)

PAGE 1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. O05E.pdf Oct.
PAGE 2
Introduction Murata has various chip inductors for every applications such as power circuits and high frequency circuits. There are 3 types of structure: wirewound, multilayer, film. These variation enables best selection for every user needs. We will support customers using material technologies and highly developed design technologies.
PAGE 3
Product Guide 4 Selection Guide 6 Product Guide by Thickness 7 aInductor for Power Lines (Power Inductor) 10 11 12 14 78 80 84 88 Introduction Product Guide Part Numbering Product Detail !Caution/Notice Soldering and Mounting Packaging Design Kits aInductor for Low Frequency Circuits Part Numbering Product Detail !Caution/Notice Soldering and Mounting Packaging Design Kits 94 95 106 107 111 112 aRF Inductor Introduction Part Numbering Product Detail !Caution/Notice Soldering and Mounting Packaging
PAGE 4
Classification and Structure of Chip Inductors oLine Up and Application of Chip Inductors Line Up For Power Lines / For Low Frequency Circuits (Under 100MHz) Application Wire Wound Type Ferrite Core LQH Series (There are some exception.
PAGE 5
Construction Features Resin coating on the top Wire Wound Type For Radio Frequency Non-magnetic ceramic core Wire High Q Large inductance Electrode Wire Wound Type For Intermediate Frequency Resin coating on the top Ferrite core for high frequency Wire High Q at intermeditate frequency Electrode RF Inductor Multilayer Type Coil pattern Industrial standard design Outer electrode Non-magnetic ceramic Film Type Inner electrode which is produced using photolithography process Small size, but high
PAGE 6
Product Guide Murata's LQp series of chip inductors (chip coils) consists of compact, high-performance inductors. Their innovative coil and case structures mean low DC resistance and outstanding high-frequency characteristics. The series is designed for a variety of applications, facilitating component selection for individual circuit requirements.
PAGE 7
RF Inductor General Purpose Inductor Chokes Inductor for Power Lines (Power Inductor) Part Number p14 LQM18P_B0 p15 LQM18P_C0 p16 LQM18P_F0 LQM18P_FR p17 p19 LQM21P_C0 LQM21P_G0 p20 LQM21P_GC p21 LQM21P_GR p22 LQM2MP_G0 p23 p25 LQM2HP_J0 LQM2HP_JC p26 LQM2HP_G0 p27 LQM2HP_GC p28 LQM2HP_E0 p29 p30 LQM31P_00 p31 LQM31P_C0 LQM32P_G0 p32 LQH2MC_02 p33 LQH2MC_52 p35 LQH2HP_G0 p37 LQH3NP_M0 p39 LQH3NP_MR p41 p42 LQH3NP_J0 LQH3NP_G0 p44 p46 LQH32P_N0 LQH32P_NC p48 p50 LQH43P_26 p52 LQH44P_P0 p54 LQH44P_J0 p56
PAGE 8
Selection Guide Construction? Wire Wound Multilayer LQH2MC/0806(2016) 1.0–82µH/90–595mA p33 LQH2HP/1008(2520) p37 Voltage Conversion LQH3NP/1212(3030) LQM21P/0805(2012) p19 0.47–4.7µH/600–1300mA(*1) p39 LQM2MP/0806(2016) p23 0.47–4.7µH/1100–1600mA LQH32P/1210(3225) p46 0.47–120µH/170–2900mA LQM2HP/1008(2520) LQH43P/1812(4532) 1.0–220µH/220–3300mA p50 LQM31P/1206(3216) LQH44P/1515(4040) 1.0–47µH/300–2450mA p52 p25 0.47–4.7µH/800–1800mA p30 0.47–4.
PAGE 9
Product Guide by Thickness Which Thickness? Inductor for Power Lines (Power Inductor) Multilayer Type Wire Wound Type 0.35mm LQM18P_B0 0.5mm LQM18P_C0 /LQM21P_C0 / LQM31P_C0 0.65mm Multilayer Type for Choke Wire Wound Type for Choke LQW15C LQH2MC_52 0.7mm LQM2HP_E0 0.8mm LQM18P_F0 / FR LQM18F 0.85mm LQM31P_00 LQM21D (1.0 to 10µH) / LQM21F_00 0.9mm LQH2MC_02 / LQM21P_G0 / GC / GR / LQM2MP_G0 / LQM2HP_G0 / GC / LQH2HP_G0 / LQH3NP_G0 LQM32P_G0 1.0mm 1.
PAGE 10
Memo !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. O05E.pdf Oct.
PAGE 11
10 Product Guide 11 Part Numbering 12 Product Detail 14 !Caution/Notice 78 Soldering and Mounting 80 Packaging 84 Design Kits 88 RF Inductor Inductor for Low Frequency Circuits Introduction Inductor for Power Lines (Power Inductor) aInductor for Power Lines (Power Inductor) !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
PAGE 12
Inductor for Power Lines (Power Inductor) cIntroduction of Power Inductor Voltage Conversion Efficiency Effect of losses in power inductor to voltage conversion efficiency Important factor of power inductor changes according to working condition of power supply. oEffect of Magnetic Loss Magnetic loss affect to efficiency at low output condition. 90 Inductor for Low Frequency Circuits Efficiency (%) 85 Tested Sample Air Core 1µH(Q=34.4) Air Core 1µH(Q=25.2) Air Core 1µH(Q=20.5) Air Core 1µH(Q=11.
PAGE 13
Inductor for Power Lines (Power Inductor) Product Guide Inductor for Power Lines (Power Inductor) L Power Inductor Multilayer Type W T: Thickness (in mm) 10000 3.2 2.5 LQM2HP_E0 LQM32P_G0 2.0 T: 0.7 2.5 T: 0.9 2.0 LQM21P_GR 2.5 LQM2HP_G0 1.25 T: 0.9 2.0 T: 0.9 2.5 LQM2HP_JC 2.0 2.5 3.2 LQM31P_00 1000 2.0 T: 1.1 1.6 T: 0.9 LQM2HP_J0 1.6 T: 0.85 3.2 LQM31P_C0 2.0 T: 1.1 1.6 1.6 T: 0.5 LQM18PN_FR 0.8 T: 0.8 2.0 LQM21P_C0 1.25 T: 0.5 2.5 2.0 LQM21P_G0 LQM2HP_GC 1.25 T: 0.
PAGE 14
Inductor for Power Lines (Power Inductor) Part Numbering (Part Number) LQ M 21 P N q w e r t R54 M y G 0 D u i o !0 uInductance Tolerance Inductor for Power Lines (Power Inductor) qProduct ID Product ID LQ Chip Inductors (Chip Coils) wStructure Code Structure H Wire Wound Type (Ferrite Core) W M Multilayer Type (Ferrite Core) Inductor for Low Frequency Circuits eDimensions (LgW) Code Inductance Tolerance D ±0.
PAGE 15
Inductor for Power Lines (Power Inductor) Part Numbering Code K L E Packaging Series Embossed Taping (ø330mm Reel) LQH*1 /LQM31F/LQM21*2 Embossed Taping (ø180mm Reel) Inductor for Power Lines (Power Inductor) !0Packaging LQH/LQM18P/LQM31F/LQM21*2 /LQM31P/LQM2HP/LQM2MP LQH3NP_MR B Bulk LQH2MC/LQM/LQW J Paper Taping (ø330mm Reel) LQM18/LQM21*3 D Paper Taping (ø180mm Reel) LQM18/LQM21*4 /LQW RF Inductor Inductor for Low Frequency Circuits *1 Except LQH2MC/LQH2HP_G0/LQH3NP/LQH43C *2 LQM21D(
PAGE 16
Inductor for Power Lines (Power Inductor) LQM18P_B0 Multilayer Magnetic Type for Voltage Conversion LQM18P_B0 Series (0603 Size) ■ Dimensions ■ Packaging 1.6±0.15 0.35±0.05 Ferrite 0.4±0.2 0.8±0.15 Code Packaging Minimum Quantity L 180mm Embossed Tape 4000 B Bulk(Bag) 1000 (in mm) Refer to pages from p.80 to p.83 for mounting information. ■ Rated Value (p: packaging code) Part Number Inductance Rated Current DC Resistance Self Resonance Frequency (min.) LQM18PN1R5NB0p 1.
PAGE 17
Inductor for Power Lines (Power Inductor) LQM18P_C0 Multilayer Magnetic Type for Voltage Conversion LQM18P_C0 Series (0603 Size) ■ Dimensions ■ Packaging 1.6±0.15 0.5±0.05 Ferrite 0.4±0.2 0.8±0.15 Code Packaging Minimum Quantity L 180mm Embossed Tape 4000 B Bulk(Bag) 1000 (in mm) Refer to pages from p.80 to p.83 for mounting information. Part Number Inductance Rated Current DC Resistance Self Resonance Frequency (min.) LQM18PN1R8NC0p 1.8µH±30% 700mA 0.
PAGE 18
Inductor for Power Lines (Power Inductor) LQM18P_F0 Multilayer Magnetic Type for Voltage Conversion LQM18P_F0 Series (0603 Size) ■ Dimensions ■ Packaging 0.80±0.15 0.4±0.20 Code Packaging Minimum Quantity L 180mm Embossed Tape 4000 B Bulk(Bag) 1000 0.8±0.15 1.6±0.15 (in mm) Refer to pages from p.80 to p.83 for mounting information. ■ Rated Value (p: packaging code) Part Number Inductance Rated Current DC Resistance Self Resonance Frequency (min.) LQM18PN1R0NF0p 1.0µH±30% 600mA 0.
PAGE 19
Inductor for Power Lines (Power Inductor) LQM18P_FR Multilayer Magnetic Type for Voltage Conversion LQM18P_ FR Series (0603 Size) ■ Dimensions ■ Packaging 0.80±0.15 0.4±0.20 Code Packaging Minimum Quantity L 180mm Embossed Tape 4000 B Bulk(Bag) 1000 0.8±0.15 1.6±0.15 (in mm) Refer to pages from p.80 to p.83 for mounting information. Part Number Inductance Rated Current DC Resistance Self Resonance Frequency (min.) LQM18PNR22NFRp 0.22µH±30% 1250mA 0.
PAGE 20
■ Temperature Rise Characteristics (Typ.) 40 Temperature Rise (°C) 30 2.2µH 20 3.3µH 4.7µH 0.22µH 10 0.47µH 1.0µH 1.5µH 0 0 400 800 Current (mA) 1200 1600 RF Inductor Inductor for Low Frequency Circuits Inductor for Power Lines (Power Inductor) Multilayer Magnetic Type for Voltage Conversion LQM18P_FR !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
PAGE 21
Inductor for Power Lines (Power Inductor) LQM21P_C0 Multilayer Magnetic Type for Voltage Conversion LQM21P_C0 Series (0805 Size) ■ Packaging 0.5±0.2 Ferrite 0.5±0.05 ■ Dimensions 1.25±0.2 Code Packaging Minimum Quantity D 180mm Paper Tape 4000 B Bulk(Bag) 1000 2.0±0.2 (in mm) Refer to pages from p.80 to p.83 for mounting information. ■ Rated Value (p: packaging code) Rated Current DC Resistance Self Resonance Frequency (min.) Operating Temperature Range LQM21PNR47MC0p 0.
PAGE 22
Inductor for Power Lines (Power Inductor) LQM21P_G0 Multilayer Magnetic Type for Voltage Conversion LQM21P_G0 Series (0805 Size) ■ Dimensions 0.5±0.2 2.0±0.15 Packaging Minimum Quantity D 180mm Paper Tape 4000 B Bulk(Bag) 1000 1.25±0.15 (in mm) Refer to pages from p.80 to p.83 for mounting information. ■ Rated Value (p: packaging code) Inductance Rated Current DC Resistance Self Resonance Frequency (min.) LQM21PNR54MG0p 0.54µH±20% 1300mA 0.075ohm ±25% 100MHz LQM21PN3R3MG0p 3.
PAGE 23
Inductor for Power Lines (Power Inductor) LQM21P_GC Multilayer Magnetic Type for Voltage Conversion LQM21P_GC Series (0805 Size) ■ Dimensions ■ Packaging 0.5±0.2 Code Packaging Minimum Quantity D 180mm Paper Tape 4000 B Bulk(Bag) 1000 0.9±0.1 2.0±0.15 1.25±0.15 (in mm) Refer to pages from p.80 to p.83 for mounting information. Part Number Inductance Rated Current DC Resistance Self Resonance Frequency (min.) LQM21PN1R0NGCp 1.0µH±30% 0.9A 0.10ohm ±25% 50MHz LQM21PN2R2NGCp 2.
PAGE 24
Inductor for Power Lines (Power Inductor) LQM21P_GR Multilayer Magnetic Type for Voltage Conversion LQM21P_GR Series (0805 Size) ■ Dimensions ■ Packaging 0.5±0.2 Code Packaging Minimum Quantity D 180mm Paper Tape 4000 B Bulk(Bag) 1000 0.9±0.1 2.0±0.15 1.25±0.15 (in mm) Refer to pages from p.80 to p.83 for mounting information. ■ Rated Value (p: packaging code) Part Number Inductance Rated Current DC Resistance Self Resonance Frequency (min.) LQM21PN1R0NGRp 1.0µH±30% 1.3A 0.
PAGE 25
Inductor for Power Lines (Power Inductor) LQM2MP_G0 Multilayer Magnetic Type for Voltage Conversion LQM2MP_G0 Series (0806 Size) ■ Packaging 0.5±0.2 0.9±0.1 ■ Dimensions Code Packaging Minimum Quantity L 180mm Embossed Tape 3000 B Bulk(Bag) 1000 1.6±0.15 2.0±0.15 (in mm) Refer to pages from p.80 to p.83 for mounting information. ■ Rated Value (p: packaging code) Inductance Rated Current DC Resistance Self Resonance Frequency (min.) LQM2MPNR47MG0p 0.47µH±20% 1600mA 0.
PAGE 26
■ Temperature Rise Characteristics (Typ.) 40 3.3µH 4.7µH Temperature Rise (°C) 30 2.2µH 1.5µH 20 1.0µH 0.47µH 10 0 0 400 800 Current (mA) 1200 1600 RF Inductor Inductor for Low Frequency Circuits Inductor for Power Lines (Power Inductor) Multilayer Magnetic Type for Voltage Conversion LQM2MP_G0 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
PAGE 27
Inductor for Power Lines (Power Inductor) LQM2HP_J0 Multilayer Magnetic Type for Voltage Conversion LQM2HP_ J0 Series (1008 Size) ■ Dimensions ■ Packaging 1.1±0.1 0.6±0.2 Code Packaging Minimum Quantity L 180mm Embossed Tape 3000 B Bulk(Bag) 1000 2.0±0.2 2.5±0.2 (in mm) Refer to pages from p.80 to p.83 for mounting information. ■ Rated Value (p: packaging code) Rated Current DC Resistance Self Resonance Frequency (min.) Operating Temperature Range LQM2HPN1R0MJ0p 1.
PAGE 28
Inductor for Power Lines (Power Inductor) LQM2HP_JC Multilayer Magnetic Type for Voltage Conversion LQM2HP_ JC Series (1008 Size) ■ Dimensions Packaging Minimum Quantity L 180mm Embossed Tape 3000 B Bulk(Bag) 1000 2.5±0.2 (in mm) Refer to pages from p.80 to p.83 for mounting information. ■ Rated Value (p: packaging code) Inductance Rated Current DC Resistance Self Resonance Frequency (min.) Operating Temperature Range LQM2HPN1R0MJCp 1.0µH±20% 1500mA 0.
PAGE 29
Inductor for Power Lines (Power Inductor) LQM2HP_G0 Multilayer Magnetic Type for Voltage Conversion LQM2HP_G0 Series (1008 Size) 0.6±0.2 ■ Packaging 0.9±0.1 ■ Dimensions 2.0±0.2 Code Packaging Minimum Quantity L 180mm Embossed Tape 3000 B Bulk(Bag) 1000 2.5±0.2 (in mm) Refer to pages from p.80 to p.83 for mounting information. ■ Rated Value (p: packaging code) Rated Current DC Resistance Self Resonance Frequency (min.) Operating Temperature Range LQM2HPNR47MG0p 0.
PAGE 30
Inductor for Power Lines (Power Inductor) LQM2HP_GC Multilayer Magnetic Type for Voltage Conversion LQM2HP_GC Series (1008 Size) 0.6±0.2 ■ Packaging 0.9±0.1 ■ Dimensions 2.0±0.2 Packaging Minimum Quantity L 180mm Embossed Tape 3000 B Bulk(Bag) 1000 (in mm) Refer to pages from p.80 to p.83 for mounting information. ■ Rated Value (p: packaging code) Part Number Inductance Rated Current DC Resistance Self Resonance Frequency (min.) Operating Temperature Range LQM2HPN1R0MGCp 1.
PAGE 31
Inductor for Power Lines (Power Inductor) LQM2HP_E0 Multilayer Magnetic Type for Voltage Conversion LQM2HP_E0 Series (1008 Size) ■ Packaging 0.6±0.2 0.7±0.1 ■ Dimensions 2.0±0.2 Code Packaging Minimum Quantity L 180mm Embossed Tape 3000 B Bulk(Bag) 1000 2.5±0.2 (in mm) Refer to pages from p.80 to p.83 for mounting information. Part Number LQM2HPNR56ME0p Test Frequency: 1MHz Inductance Rated Current DC Resistance Self Resonance Frequency (min.) 0.56µH±20% 1500mA 0.
PAGE 32
Inductor for Power Lines (Power Inductor) LQM31P_00 Multilayer Magnetic Type for Voltage Conversion LQM31P_00 Series (1206 Size) ■ Dimensions 0.6±0.2 Code Packaging Minimum Quantity L 180mm Embossed Tape 3000 B Bulk(Bag) 1000 1.6±0.2 3.2±0.2 (in mm) Refer to pages from p.80 to p.83 for mounting information. ■ Rated Value (p: packaging code) Inductance Rated Current DC Resistance Self Resonance Frequency (min.) Operating Temperature Range LQM31PNR47M00p 0.47µH±20% 1400mA 0.
PAGE 33
Inductor for Power Lines (Power Inductor) LQM31P_C0 Multilayer Magnetic Type for Voltage Conversion LQM31P_C0 Series (1206 Size) ■ Packaging 0.6±0.2 0.5±0.05 ■ Dimensions Code Packaging Minimum Quantity L 180mm Embossed Tape 4000 B Bulk(Bag) 1000 1.6±0.2 3.2±0.2 (in mm) Refer to pages from p.80 to p.83 for mounting information. ■ Rated Value (p: packaging code) Rated Current DC Resistance Self Resonance Frequency (min.) Operating Temperature Range LQM31PNR47MC0p 0.
PAGE 34
Inductor for Power Lines (Power Inductor) LQM32P_G0 Multilayer Magnetic Type for Voltage Conversion LQM32P_G0 Series (1210 Size) ■ Dimensions ■ Packaging 0.9±0.1 0.6±0.2 Packaging Minimum Quantity L 180mm Embossed Tape 3000 B Bulk(Bag) 1000 2.5±0.15 (in mm) Refer to pages from p.80 to p.83 for mounting information. ■ Rated Value (p: packaging code) Part Number Inductance Rated Current DC Resistance Self Resonance Frequency (min.) LQM32PN1R0MG0p 1.0µH±20% 1800mA 0.
PAGE 35
Inductor for Power Lines (Power Inductor) LQH2MC_02 Wire Wound Magnetic Type for Voltage Conversion LQH2MC_02 Series (0806 Size) ■ Packaging 0.90±0.05 ■ Dimensions 2.0±0.2 1.6±0.2 Code Packaging Minimum Quantity L 180mm Embossed Tape 3000 B Bulk(Bag) 100 0.6±0.2 0.8±0.2 0.6±0.2 (in mm) Refer to pages from p.80 to p.83 for mounting information.
PAGE 36
■ Inductance-Frequency Characteristics (Typ.) ■ Inductance-Current Characteristics (Typ.) 1000 1000 82µH 47µH 100 100 82µH 22µH 47µH Inductance (µH) Inductance (µH) Inductor for Power Lines (Power Inductor) Wire Wound Magnetic Type for Voltage Conversion LQH2MC_02 10µH 4.7µH 10 1.0µH 22µH 10µH 10 4.7µH 1.0µH 1 1 0.1 0.1 1 10 Frequency (MHz) 100 1000 0.1 10 100 Current (mA) 1000 ■ Temperature Rise Characteristics (Typ.) 50 47µH 10µH 4.7µH 2.2µH 1.
PAGE 37
Inductor for Power Lines (Power Inductor) LQH2MC_52 Wire Wound Magnetic Type for Voltage Conversion LQH2MC_52 Series (0806 Size) ■ Packaging 0.65±0.05 ■ Dimensions 2.0±0.2 1.6±0.2 Code Packaging Minimum Quantity L 180mm Embossed Tape 3000 B Bulk(Bag) 100 0.6±0.2 0.8±0.2 0.6±0.2 (in mm) Refer to pages from p.80 to p.83 for mounting information.
PAGE 38
■ Temperature Rise Characteristics (Typ.) 50 10µH 4.7µH 2.2µH 1.0µH Temperature Rise (°C) 40 30 20 10 0 0 200 400 600 Current (mA) 800 1000 RF Inductor Inductor for Low Frequency Circuits Inductor for Power Lines (Power Inductor) Wire Wound Magnetic Type for Voltage Conversion LQH2MC_52 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
PAGE 39
Inductor for Power Lines (Power Inductor) LQH2HP_G0 Wire Wound Magnetic Type for Voltage Conversion LQH2HP_G0 Series (1008 Size) ■ Dimensions ■ Packaging 0.9±0.1 Polarity Marking 2.5±0.2 0.85±0.3 2.0±0.2 Code Packaging Minimum Quantity L 180mm Embossed Tape 3000 0.85±0.3 (in mm) Refer to pages from p.80 to p.83 for mounting information. ■ Rated Value (p: packaging code) *1 *2 Inductance LQH2HPN2R2MG0p 2.2µH±20% 1640mA 1000mA 0.17ohm ±20% 80MHz LQH2HPN3R3MG0p 3.
PAGE 40
■ Temperature Rise Characteristics (Typ.) 50 10µH 4.7µH 3.3µH 2.2µH 100µH Temperature Rise (°C) 40 6.8µH 22µH 30 20 10 0 0 350 700 Current (mA) 1050 1400 RF Inductor Inductor for Low Frequency Circuits Inductor for Power Lines (Power Inductor) Wire Wound Magnetic Type for Voltage Conversion LQH2HP_G0 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
PAGE 41
Inductor for Power Lines (Power Inductor) LQH3NP_M0 Wire Wound Magnetic Type for Voltage Conversion LQH3NP_M0 Series (1212 Size) ■ Dimensions ■ Packaging 1.40±0.1 Polarity Marking 2.7±0.2 Code Packaging Minimum Quantity L 180mm Embossed Tape 1000 K 330mm Embossed Tape 4000 3.0±0.2 3.0±0.2 0.9±0.2 0.9±0.2 (in mm) 1.2±0.2 Refer to pages from p.80 to p.83 for mounting information. *2 DC Resistance Self Resonance Frequency (min.) 2050mA 0.044ohm ±20% 130MHz 1400mA 2050mA 0.
PAGE 42
■ Inductance-Frequency Characteristics (Typ.) ■ Inductance-Current Characteristics (Typ.) 1000 1000 100µH 47µH 100 Inductance (µH) 100 Inductance (µH) Inductor for Power Lines (Power Inductor) Wire Wound Magnetic Type for Voltage Conversion LQH3NP_M0 10µH 4.7µH 10 1.0µH 1 100µH 47µH 10 10µH 4.7µH 1 1.0µH 0.1 0.1 1 10 Frequency (MHz) 100 1000 0.1 10 100 1000 10000 Current (mA) ■ Temperature Rise Characteristics (Typ.) 50 100µH 47µH 4.7µH 1.
PAGE 43
Inductor for Power Lines (Power Inductor) LQH3NP_MR Wire Wound Magnetic Type for Voltage Conversion LQH3NP_MR Series (1212 Size) ■ Dimensions ■ Packaging 1.40±0.1 Polarity Marking 3.0±0.2 Code Packaging Minimum Quantity E 180mm Embossed Tape 2000 F 330mm Embossed Tape 8000 3.0±0.2 3.0±0.2 1.0±0.2 1.0±0.2 (in mm) Refer to pages from p.80 to p.83 for mounting information.
PAGE 44
Inductor for Power Lines (Power Inductor) LQH3NP_J0 Wire Wound Magnetic Type for Voltage Conversion LQH3NP_ J0 Series (1212 Size) ■ Dimensions Inductor for Low Frequency Circuits 1.1±0.1 3.0±0.2 Code Packaging Minimum Quantity L 180mm Embossed Tape 1000 K 330mm Embossed Tape 5000 3.0±0.2 0.9±0.2 0.9±0.2 (in mm) Refer to pages from p.80 to p.83 for mounting information. ■ Rated Value (p: packaging code) *1 Part Number RF Inductor ■ Packaging Polarity Marking 3.0±0.
PAGE 45
■ Inductance-Frequency Characteristics (Typ.) ■ Inductance-Current Characteristics (Typ.) 100 1000 47µH 33µH 10 2.2µH 1.5µH 1 22µH 15µH 10µH Inductance (µH) 47µH 33µH 22µH 15µH 10µH 6.8µH 4.7µH 3.3µH 100 Inductance (µH) Wire Wound Magnetic Type for Voltage Conversion Inductor for Power Lines (Power Inductor) LQH3NP_J0 10 6.8µH 4.7µH 3.3µH 2.2µH 1.5µH 1 1.0µH 1.0µH 0.1 0.1 1 10 100 0.1 10 100 Frequency (MHz) 1000 10000 Current (mA) ■ Temperature Rise Characteristics (Typ.
PAGE 46
Inductor for Power Lines (Power Inductor) LQH3NP_G0 Wire Wound Magnetic Type for Voltage Conversion LQH3NP_G0 Series (1212 Size) ■ Dimensions Inductor for Low Frequency Circuits 0.90±0.1 2.7±0.2 Code Packaging Minimum Quantity L 180mm Embossed Tape 1500 K 330mm Embossed Tape 6000 3.0±0.2 0.9±0.2 0.9±0.2 (in mm) 1.2±0.2 Refer to pages from p.80 to p.83 for mounting information. ■ Rated Value (p: packaging code) *1 Part Number RF Inductor ■ Packaging Polarity Marking 3.0±0.
PAGE 47
■ Inductance-Frequency Characteristics (Typ.) Wire Wound Magnetic Type for Voltage Conversion Inductor for Power Lines (Power Inductor) LQH3NP_G0 ■ Inductance-Current Characteristics (Typ.) 1000 1000 250µH 250µH 100µH 100 100 100µH Inductance (µH) Inductance (µH) 47µH 10µH 10 4.7µH 1.0µH 1 10 10µH 4.7µH 1 1 0.1 0.1 47µH 10 100 0.1 10 1.0µH 100 Frequency (MHz) 1000 10000 Current (mA) ■ Temperature Rise Characteristics (Typ.) 50 47µH 10µH 4.7µH 1.
PAGE 48
Inductor for Power Lines (Power Inductor) LQH32P_N0 Wire Wound Magnetic Type for Voltage Conversion LQH32P_N0 Series (1210 Size) ■ Dimensions 2.7±0.2 Inductor for Low Frequency Circuits 2.5±0.2 A A Code Packaging Minimum Quantity L 180mm Embossed Tape 2000 K 330mm Embossed Tape 7500 2.5±0.2 3.2±0.3 A: 2.8 max. 0.9±0.3 0.9±0.3 1.3±0.2 (in mm) Refer to pages from p.80 to p.83 for mounting information. ■ Rated Value (p: packaging code) *1 Part Number RF Inductor ■ Packaging 1.55±0.
PAGE 49
■ Inductance-Frequency Characteristics (Typ.) ■ Inductance-Current Characteristics (Typ.) 1000 1000 10 1 100 Inductance (µH) 120µH 100µH 68µH 47µH 33µH 22µH 15µH 10µH 6.8µH 4.7µH 3.3µH 2.2µH 1.5µH 1.0µH 100 Inductance (µH) Wire Wound Magnetic Type for Voltage Conversion Inductor for Power Lines (Power Inductor) LQH32P_N0 100µH 47µH 22µH 10 10µH 4.7µH 2.2µH 1 1.0µH 0.47µH 0.1 0.1 0.1 1 10 100 1 10 Frequency (MHz) 100 Current (mA) 1000 10000 ■ Temperature Rise Characteristics (Typ.
PAGE 50
Inductor for Power Lines (Power Inductor) LQH32P_NC Wire Wound Magnetic Type for Voltage Conversion LQH32P_NC Series (1210 Size) Inductor for Low Frequency Circuits ■ Dimensions ■ Packaging 2.7±0.2 2.5±0.2 1.55±0.15 Inductor for Power Lines (Power Inductor) Wire Wound Magnetic Type for Voltage Conversion Bias Current Characteristics Improved Code Packaging Minimum Quantity L 180mm Embossed Tape 2000 K 330mm Embossed Tape 7500 2.5±0.2 3.2±0.3 0.9±0.3 0.9±0.3 1.3±0.
PAGE 51
Wire Wound Magnetic Type for Voltage Conversion Inductor for Power Lines (Power Inductor) LQH32P_NC ■ Temperature Rise Characteristics (Typ.) 50 22µH 15µH 10µH Temperature Rise (°C) 40 6.8µH 4.7µH 30 3.3µH 2.2µH 1.5µH 20 1.0µH 0.47µH 10 0 800 1600 2400 Current (mA) 3200 4000 RF Inductor Inductor for Low Frequency Circuits 0 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
PAGE 52
Inductor for Power Lines (Power Inductor) LQH43P_26 Wire Wound Magnetic Type for Voltage Conversion LQH43P_26 Series (1812 Size) ■ Dimensions Minimum Quantity Code Packaging L 180mm Embossed Tape 500 K 330mm Embossed Tape 2500 3.2±0.2 4.5±0.3 (in mm) 1.0min. 1.0min. 1.0min. Refer to pages from p.80 to p.83 for mounting information. ■ Rated Value (p: packaging code) *1 Part Number Inductor for Low Frequency Circuits ■ Packaging 3.2±0.2 3.6±0.2 2.6±0.
PAGE 53
Wire Wound Magnetic Type for Voltage Conversion Inductor for Power Lines (Power Inductor) LQH43P_26 ■ Temperature Rise Characteristics (Typ.) 50 220µH 100µH 47µH 22µH 4.7µH 1.0µH 2.2µH 10µH Temperature Rise (°C) 40 30 20 10 0 800 1600 2400 Current (mA) 3200 4000 RF Inductor Inductor for Low Frequency Circuits 0 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
PAGE 54
Inductor for Power Lines (Power Inductor) LQH44P_P0 Wire Wound Magnetic Type for Voltage Conversion LQH44P_P0 Series (1515 Size) 4.0±0.2 4.0±0.2 0.35 min. 3.7±0.2 Code Packaging Minimum Quantity L 180mm Embossed Tape 1000 K 330mm Embossed Tape 3500 2.4 min. 1.2±0.2 1.0 min. 1.2±0.2 (in mm) Refer to pages from p.80 to p.83 for mounting information. ■ Rated Value (p: packaging code) *1 Part Number Inductor for Low Frequency Circuits ■ Packaging 1.65±0.15 ■ Dimensions 3.5±0.
PAGE 55
Wire Wound Magnetic Type for Voltage Conversion Inductor for Power Lines (Power Inductor) LQH44P_P0 ■ Temperature Rise Characteristics (Typ.) 50 22µH 10µH 4.7µH 2.2µH 1.0µH Temperature Rise (°C) 40 30 20 10 0 500 1000 1500 Current (mA) 2000 2500 3000 RF Inductor Inductor for Low Frequency Circuits 0 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
PAGE 56
Inductor for Power Lines (Power Inductor) LQH44P_J0 Wire Wound Magnetic Type for Voltage Conversion LQH44P_ J0 Series (1515 Size) 1.1±0.1 Code Packaging Minimum Quantity L 180mm Embossed Tape 1000 K 330mm Embossed Tape 3500 1.1±0.2 1.5 (typ.) 1.1±0.2 0.4 (typ.) 4.0±0.2 (in mm) Refer to pages from p.80 to p.83 for mounting information. ■ Rated Value (p: packaging code) *1 Part Number Inductor for Low Frequency Circuits ■ Packaging (0.12) ■ Dimensions 4.0±0.
PAGE 57
Wire Wound Magnetic Type for Voltage Conversion Inductor for Power Lines (Power Inductor) LQH44P_J0 ■ Temperature Rise Characteristics (Typ.) 40 10µH 47µH 6.8µH 33µH 4.7µH 3.3µH 15µH Temperature Rise (°C) 30 22µH 20 2.2µH 1.5µH 1.0µH 10 0 500 1000 Current (mA) 1500 2000 RF Inductor Inductor for Low Frequency Circuits 0 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
PAGE 58
Inductor for Power Lines (Power Inductor) LQH5BP_T0 Wire Wound Magnetic Type for Voltage Conversion LQH5BP_T0 Series (2020 Size) ■ Dimensions Minimum Quantity Code Packaging L 180mm Embossed Tape 500 K 330mm Embossed Tape 3000 (0.2) 2.0±0.2 5.0±0.2 5.0±0.2 1.5±0.2 1.5±0.2 (in mm) Refer to pages from p.80 to p.83 for mounting information. ■ Rated Value (p: packaging code) *1 Part Number Inductor for Low Frequency Circuits ■ Packaging 5.0±0.
PAGE 59
Wire Wound Magnetic Type for Voltage Conversion Inductor for Power Lines (Power Inductor) LQH5BP_T0 ■ Temperature Rise Characteristics (Typ.) 40 2.7µH 2.2µH Temperature Rise (°C) 30 3.3µH 1.5µH 1.0µH/1.2µH 0.47µH 20 10 0 1000 2000 3000 Current (mA) 4000 5000 RF Inductor Inductor for Low Frequency Circuits 0 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
PAGE 60
Inductor for Power Lines (Power Inductor) LQH55P_R0 Wire Wound Magnetic Type for Voltage Conversion LQH55P_R0 Series (2220 Size) Inductor for Low Frequency Circuits ■ Packaging 1.85±0.15 ■ Dimensions Minimum Quantity Code Packaging L 180mm Embossed Tape 500 K 330mm Embossed Tape 3000 1.2±0.2 5.87±0.2 5.2±0.2 Inductor for Power Lines (Power Inductor) Wire Wound Magnetic Type for Voltage Conversion 2220 Size, 2.0mm max. Thickness 1.6±0.2 (in mm) Refer to pages from p.80 to p.
PAGE 61
Wire Wound Magnetic Type for Voltage Conversion Inductor for Power Lines (Power Inductor) LQH55P_R0 ■ Temperature Rise Characteristics (Typ.) 50 22µH 4.7µH 6.8µH 3.3µH 2.7µH 10µH Temperature Rise (°C) 40 2.2µH 30 1.2µH 20 10 0 500 1000 1500 Current (mA) 2000 2500 3000 RF Inductor Inductor for Low Frequency Circuits 0 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
PAGE 62
Inductor for Power Lines (Power Inductor) LQM18F Multilayer Magnetic Type for Choke LQM18F Series (0603 Size) Inductor for Power Lines (Power Inductor) Multilayer Magnetic Type for Choke 0603 Size ■ Dimensions ■ Packaging 0.8±0.1 0.3±0.2 0.8±0.1 Minimum Quantity Code Packaging D 180mm Paper Tape 4000 J 330mm Paper Tape 10000 B Bulk(Bag) 1000 1.6±0.1 (in mm) Refer to pages from p.80 to p.83 for mounting information.
PAGE 63
Inductor for Power Lines (Power Inductor) LQM21D Multilayer Magnetic Type for Choke LQM21D Series (0805 Size) ■ Dimensions ■ Packaging 0.5±0.3 Code Packaging Minimum Quantity D 180mm Paper Tape 4000 *1 L 180mm Embossed Tape 3000 *2 J 330mm Paper Tape 10000 *1 K 330mm Embossed Tape 10000 *2 B Bulk(Bag) 1000 t 1.25±0.2 2.0±0.2 (in mm) *1: only LQM21D (1.0 to 10µH) *2: only LQM21D (22 to 47µH) Dimension of t Inductance: 1.0 to 10µH 0.85±0.2 Inductance: 22 to 47µH 1.25±0.
PAGE 64
Inductor for Power Lines (Power Inductor) LQM21F_00 Multilayer Magnetic Type for Choke LQM21F_00 Series (0805 Size) Inductor for Power Lines (Power Inductor) Multilayer Magnetic Type for Choke Bias Current Characteristics Improved ■ Dimensions ■ Packaging t 0.5±0.3 1.25±0.2 2.0±0.2 (in mm) Dimension of t Inductance: 1.0 to 2.2µH 0.85±0.2 Inductance: 4.7 to 47µH 1.25±0.
PAGE 65
Inductor for Power Lines (Power Inductor) LQM21F_70 Multilayer Magnetic Type for Choke LQM21F_70 Series (0805 Size) ■ Dimensions ■ Packaging 1.25±0.2 0.5±0.3 Code Packaging Minimum Quantity L 180mm Embossed Tape 3000 B Bulk(Bag) 1000 1.25±0.2 2.0±0.2 (in mm) Refer to pages from p.80 to p.83 for mounting information.
PAGE 66
Inductor for Power Lines (Power Inductor) LQM21F_80 Multilayer Magnetic Type for Choke LQM21F_80 Series (0805 Size) Inductor for Power Lines (Power Inductor) Multilayer Magnetic Type for Choke 0805 Size, Large Current, Low DC Resistance ■ Dimensions ■ Packaging 1.25±0.2 0.5±0.3 Code Packaging Minimum Quantity L 180mm Embossed Tape 3000 K 330mm Embossed Tape 10000 B Bulk(Bag) 1000 1.25±0.2 2.0±0.2 (in mm) Refer to pages from p.80 to p.83 for mounting information.
PAGE 67
Inductor for Power Lines (Power Inductor) LQM31F Multilayer Magnetic Type for Choke LQM31F Series (1206 Size) ■ Dimensions ■ Packaging 1.0±0.2 0.7±0.3 1.6±0.2 Code Packaging Minimum Quantity L 180mm Embossed Tape 3000 K 330mm Embossed Tape 10000 B Bulk(Bag) 1000 3.2±0.2 (in mm) Refer to pages from p.80 to p.83 for mounting information.
PAGE 68
Inductor for Power Lines (Power Inductor) LQW15C Wire Wound Magnetic Type for Choke LQW15C Series (0402 Size) ■ Dimensions (0.1) 0.5±0.1 1.0±0.1 Code Packaging Minimum Quantity D 180mm Paper Tape 10000 B Bulk(Bag) 500 0.55±0.1 0.3±0.1 0.3±0.1 (in mm) Refer to pages from p.80 to p.83 for mounting information. ■ Rated Value (p: packaging code) Part Number Inductor for Low Frequency Circuits ■ Packaging 0.5±0.
PAGE 69
Inductor for Power Lines (Power Inductor) LQW18C Wire Wound Magnetic Type for Choke LQW18C Series (0603 Size) ■ Packaging (0.2) 0.8±0.15 ■ Dimensions Code Packaging Minimum Quantity D 180mm Paper Tape 4000 B Bulk(Bag) 500 0.8±0.15 1.6±0.15 0.4±0.1 0.4±0.1 (in mm) Refer to pages from p.80 to p.83 for mounting information. ■ Rated Value (p: packaging code) Test Frequency Rated Current Max. of DC Resistance Self Resonance Frequency (min.) LQW18CN4N9D00p 4.9nH±0.5nH 10MHz 2600mA 0.
PAGE 70
Inductor for Power Lines (Power Inductor) LQH31C Wire Wound Magnetic Type for Choke LQH31C Series (1206 Size) ■ Dimensions ■ Packaging 1.6±0.2 Code Packaging Minimum Quantity L 180mm Embossed Tape 2000 K 330mm Embossed Tape 7500 1.6±0.2 3.2±0.3 0.7min. 0.7min. (in mm) 0.7min. Refer to pages from p.80 to p.83 for mounting information. ■ Rated Value (p: packaging code) Part Number Inductor for Low Frequency Circuits 2.3±0.2 1.8±0.
PAGE 71
Inductor for Power Lines (Power Inductor) LQH32C_23/LQH32C_33 Wire Wound Magnetic Type for Choke LQH32C_23/LQH32C_33 Series (1210 Size) ■ Dimensions 2.5±0.2 2.0±0.2 2.5±0.2 Code Packaging Minimum Quantity L 180mm Embossed Tape 2000 K 330mm Embossed Tape 7500 2.5±0.2 3.2±0.3 0.9±0.3 1.3±0.2 ■ Packaging 0.9±0.3 (in mm) Refer to pages from p.80 to p.83 for mounting information. Test Frequency Rated Current DC Resistance Self Resonance Frequency (min.) LQH32CN1R0M23p 1.
PAGE 72
■ Impedance-Frequency Characteristics (Typ.) ■ Inductance-Current Characteristics (Typ.) 1000 1000 100 10µH 10 1.0µH 1 10µH 10 1.0µH 1 0.1 0.01 0.01 100µH 100 Inductance (µH) Impedance (kΩ) 100µH 0.1 0.
PAGE 73
Inductor for Power Lines (Power Inductor) LQH32C_53 Wire Wound Magnetic Type for Choke LQH32C_53 Series (1210 Size) ■ Dimensions ■ Packaging 2.5±0.2 1.55±0.15 2.5±0.2 A Code Packaging Minimum Quantity L 180mm Embossed Tape 2000 K 330mm Embossed Tape 7500 A 3.2±0.3 2.5±0.2 A : 2.8 max. 0.9±0.3 1.3±0.2 0.9±0.3 (in mm) Refer to pages from p.80 to p.83 for mounting information. Inductance Test Frequency Rated Current DC Resistance Self Resonance Frequency (min.) LQH32CN1R0M53p 1.
PAGE 74
Inductor for Power Lines (Power Inductor) LQH43C_03 Wire Wound Magnetic Type for Choke LQH43C_03 Series (1812 Size) ■ Dimensions Packaging Minimum Quantity L 180mm Embossed Tape 500 (in mm) 1.0min. 1.0min. 1.0min. Refer to pages from p.80 to p.83 for mounting information. ■ Rated Value (p: packaging code) Inductance Test Frequency Rated Current Max. of DC Resistance Self Resonance Frequency (min.) LQH43CN1R0M03p 1.0µH±20% 1MHz 1080mA 0.08ohm 100MHz LQH43CN1R5M03p 1.
PAGE 75
Inductor for Power Lines (Power Inductor) LQH43C_33 Wire Wound Magnetic Type for Choke LQH43C_33 Series (1812 Size) ■ Dimensions ■ Packaging 3.2±0.2 2.6±0.2 3.6±0.2 Code Packaging Minimum Quantity L 180mm Embossed Tape 500 3.2±0.2 4.5±0.3 (in mm) 1.0min. 1.0min. 1.0min. Refer to pages from p.80 to p.83 for mounting information. Inductance Test Frequency Rated Current DC Resistance Self Resonance Frequency (min.) LQH43CNR56M33p 0.56µH±20% 1MHz 2950mA 0.
PAGE 76
Inductor for Power Lines (Power Inductor) LQH55D Wire Wound Magnetic Type for Choke LQH55D Series (2220 Size) Inductor for Power Lines (Power Inductor) Wire Wound Magnetic Type for Choke 2220 Size, Large Current ■ Dimensions ■ Packaging 5.0±0.3 4.7±0.3 5.0±0.3 Minimum Quantity Code Packaging L 180mm Embossed Tape 350 K 330mm Embossed Tape 1500 5.7±0.3 1.3 min. 1.7 min. 1.3 min. (in mm) Refer to pages from p.80 to p.83 for mounting information.
PAGE 77
■ Impedance-Frequency Characteristics (Typ.) ■ Inductance-Current Characteristics (Typ.) 1000000 100000 100000 10000 1000 10000µH Inductance (µH) Impedance (Ω) 10000 1000µH 100µH 100 10µH 1µH 10 0.1 1 10 Frequency (MHz) 1000 100 10 1 100 1000 0.1 0.001 10000µH 1000µH 100µH 10µH 1µH 0.01 0.1 Current (A) 1 10 RF Inductor Inductor for Low Frequency Circuits 1 0.
PAGE 78
Inductor for Power Lines (Power Inductor) LQH66S Wire Wound Magnetic Type for Choke LQH66S Series (2525 Size) Inductor for Power Lines (Power Inductor) Wire Wound Magnetic Type for Choke 2525 Size, Closed Magnetic Circuit ■ Dimensions ■ Packaging 6.3±0.3 4.7±0.3 6.3±0.3 Minimum Quantity Code Packaging L 180mm Embossed Tape 350 K 330mm Embossed Tape 1500 6.3±0.3 1.3 min. 1.7 min. 1.3 min. (in mm) Refer to pages from p.80 to p.83 for mounting information.
PAGE 79
■ Impedance-Frequency Characteristics (Typ.) ■ Inductance-Current Characteristics (Typ.) 1000000 100000 100000 10000 10000µH Inductance (µH) Impedance (Ω) 10000 1000µH 1000 100µH 100 10µH 1000 100 10 1µH 1 10 0.1 1 10 Frequency (MHz) 100 1000 0.1 0.001 10000µH 1000µH 100µH 10µH 1µH 0.01 0.1 Current (A) 1 10 RF Inductor Inductor for Low Frequency Circuits 1 0.
PAGE 80
Inductor for Power Lines (Power Inductor) !Caution/Notice !Caution ● Rating Inductor for Power Lines (Power Inductor) Do not use products beyond the rated current as this may create excessive heat. Notice ● Storage and Operating Condition Inductor for Low Frequency Circuits !Caution/ Notice Do not use products in chemical atmosphere such as chlorine gas, acid or sulfide gas. 1.
PAGE 81
Inductor for Power Lines (Power Inductor) Bending ● Measuring Method I1 I2 A Zm B Zx V2 V1 C Test Head Inductor for Power Lines (Power Inductor) Measuring Method of Inductance/Q 1. Residual elements and stray elements of test fixture can be described by F-parameter as shown in the following: D Test fixture V1 = I1 A B V2 C D I2 Product 2. The impedance of chip inductor (chip coil) Zx and measured value Zm can be described by input/output current/voltage.
PAGE 82
Inductor for Power Lines (Power Inductor) Soldering and Mounting A high Q value is achieved when the PCB electrode land pattern is designed so that it does not project beyond the chip inductor (chip coil) electrode. Land Pattern + Solder Resist Land Pattern Solder Resist (in mm) Series Standard Land Dimensions LQM18F/18P LQM21D/21F/21P LQM2MP LQM2HP LQM31F LQM31P LQM32P LQH2MC LQH31C LQH32P LQH44P LQH5BP LQH55D/66S LQW15C LQW18C a Part Number c b a b 2.2-2.6 c LQM18F Flow /18P Reflow 0.
PAGE 83
Inductor for Power Lines (Power Inductor) Soldering and Mounting 2. Standard Soldering Conditions (1) Soldering method Chip inductor (Chip coils) can be flow or reflow soldered. Please contact Murata regarding other soldering methods. As for LQH2MC/2HP/3NP/32P/44P/5BP/55D/55P/66S, LQM32P, LQW15C/18C series, please use reflow soldering. Soldering and Mounting Inductor for Power Lines (Power Inductor) Solder: Use Sn-3.0Ag-0.5Cu solder.
PAGE 84
Inductor for Low Frequency Circuits Soldering Inductor for Power Lines (Power Inductor) and Mounting Inductor for Power Lines (Power Inductor) Soldering and Mounting (3) Reworking with Soldering Iron Preheating at 150°C for 1 minute is required. Do not directly touch the ceramic element with the tip of the soldering iron. The reworking soldering conditions are as follows: Soldering iron power output: 80W max. Temperature of soldering iron tip: 350°C Diameter of soldering iron end: 3.0mm max.
PAGE 85
(5) Amount of Adhesive If too much adhesive is applied, then it may overflow into the land or termination areas and yield poor solderability. In contrast, if insufficient adhesive is applied, or if the adhesive is not sufficiently hardened, then the chip may become detached during flow soldering. Apply the adhesive in accordance with the conditions shown in chart. LQH_C/D/H/N/P LQH_S LQM LQW_C LQH_C/H/M/N Part Number LQM Typical Application Amount (in:mg) IR-100 LQM18F/18P 0.06-0.
PAGE 86
Packaging Inductor for Power Lines (Power Inductor) 1.75±0.1 ø1.5 +0.1 -0 b 3.5±0.05 2.0±0.05 2.0±0.05 4.0±0.1 LQW15C (8.0) Inductor for Power Lines (Power Inductor) ■ Minimum Quantity and 8mm Width Taping Dimensions c a Direction of feed Paper Tape Part Number LQW15C *1 Dimensions Total Thickness of Tape Packaging Code (Minimum Qty. [pcs.]) a b c ø180mm reel ø330mm reel Bulk 0.64/0.66 1.18 0.8 max. D [10000] - B [500] Packaging *1 0.66 (18-48nH) 0.
PAGE 87
Packaging Inductor for Power Lines (Power Inductor) ■ Minimum Quantity and 8mm Width Taping Dimensions 4.0±0.1 (8.0) 1.75±0.1 ∗1 0.2 Inductor for Power Lines (Power Inductor) a b 3.5±0.05 ø1.5 +0.1 -0 4.0±0.1 c c ∗1: 0.25 LQM2HP/31P_00, LQH2 Direction of feed 2.0±0.05 Dimension of the cavity of embossed tape is measured at the bottom side. Paper Tape Total Thickness of Tape Packaging Code (Minimum Qty. [pcs.]) b c ø180mm reel ø330mm reel Bulk LQM21D (1-10µH) 1.
PAGE 88
Packaging Inductor for Power Lines (Power Inductor) ■ Minimum Quantity and 8mm Width Taping Dimensions a 4.0±0.1 1.75±0.1 0.25 (8.0) 3.5±0.05 Polarity Marking b Inductor for Power Lines (Power Inductor) ø1.5 +0.1 -0 4.0±0.1 c Direction of feed 2.0±0.05 Dimension of the cavity of embossed tape is measured at the bottom side. Embossed Tape Depth of Cavity c ø180mm reel ø330mm reel Bulk 2.3 2.8 1.1 L [3000] - - 3.5±0.05 a 4.0±0.1 4.0±0.1 c Direction of feed 2.0±0.
PAGE 89
Packaging Inductor for Power Lines (Power Inductor) Inductor for Power Lines (Power Inductor) d (12.0) ø1.5 +0.1 -0 b 2.0±0.05 4.0±0.1 8.0±0.1 5.5±0.05 1.75±0.1 ■ Minimum Quantity and 12mm Width Embossed Taping Dimensions a c Polarity Marking Direction of feed Dimension of the cavity of embossed tape is measured at the bottom side. Embossed Tape Packaging Code (Minimum Qty. [pcs.]) c d ø180mm reel ø330mm reel Bulk LQH3NP_M0 3.3 3.3 1.6 0.25 L [1000] K [4000] - LQH3NP_J0 3.3 3.
PAGE 90
Inductor for Power Lines (Power Inductor) Design Kits Inductor for Power Lines (Power Inductor) ■ Holder Type RF Inductor Inductor for Low Frequency Circuits Design Kits oEKLMQM2PH (Inductor for Power Lines Multilayer Type) No. Part Number Quantity (pcs.
PAGE 91
Inductor for Power Lines (Power Inductor) Design Kits Continued from the preceding page. Quantity (pcs.
PAGE 92
Inductor for Power Lines (Power Inductor) Design Kits Inductor for Low Frequency Circuits Design Kits Inductor for Power Lines (Power Inductor) Continued from the preceding page. No. Part Number Quantity (pcs.
PAGE 93
Inductor for Power Lines (Power Inductor) Design Kits Continued from the preceding page. No. Part Number Quantity (pcs.) 1 2 3 4 5 6 7 8 9 10 11 12 LQH5BPNR47NT0 LQH5BPN1R0NT0 LQH5BPN1R2NT0 LQH5BPN1R5NT0 LQH5BPN2R2NT0 LQH5BPN2R7NT0 LQH5BPN3R3NT0 LQH5BPN4R7NT0 LQH5BPN6R8NT0 LQH5BPN100MT0 LQH5BPN150MT0 LQH5BPN220MT0 10 10 10 10 10 10 10 10 10 10 10 10 Inductance Nominal Tolerance ±30% 0.47µH ±30% 1.0µH ±30% 1.2µH ±30% 1.5µH ±30% 2.2µH ±30% 2.7µH ±30% 3.3µH ±30% 4.7µH ±30% 6.
PAGE 94
Inductor for Power Lines (Power Inductor) Design Kits Continued from the preceding page. Inductor for Low Frequency Circuits Design Kits Inductor for Power Lines (Power Inductor) oEKLMH43CD (for Choke Wire Wound Type) No.
PAGE 95
Inductor for Power Lines (Power Inductor) Part Numbering 94 Product Detail 95 106 Soldering and Mounting 107 Packaging 111 Design Kits 112 RF Inductor !Caution/Notice Inductor for Low Frequency Circuits aInductor for Low Frequency Circuits !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
PAGE 96
Inductor for Low Frequency Circuits Part Numbering (Part Number) LQ M 18 N N q w e r t 47N M y 0 0 u i o !0 yInductance qProduct ID Inductor for Power Lines (Power Inductor) D Product ID LQ Chip Inductors (Chip Coils) wStructure Code Structure H Wire Wound Type (Ferrite Core) M Multilayer Type (Ferrite Core) eDimensions (LgW) Expressed by three-digit alphanumerics. The unit is micro-henry (µH).
PAGE 97
Inductor for Low Frequency Circuits LQM18N Multilayer Magnetic Type LQM18N Series (0603 Size) ■ Dimensions ■ Packaging 0.8±0.15 0.35±0.15 0.8±0.15 Minimum Quantity Code Packaging D 180mm Paper Tape 4000 J 330mm Paper Tape 10000 B Bulk(Bag) 1000 1.6±0.15 (in mm) Refer to pages from p.107 to p.110 for mounting information. Inductor for Power Lines (Power Inductor) 0603 Size, Multilayer Type Test Frequency Rated Current Max. of DC Resistance Q (min.
PAGE 98
■ Q-Frequency Characteristics (Typ.) ■ Inductance-Current Characteristics (Typ.
PAGE 99
Inductor for Low Frequency Circuits LQM21N Multilayer Magnetic Type LQM21N Series (0805 Size) ■ Dimensions ■ Packaging 0.5±0.3 Code Packaging Minimum Quantity D 180mm Paper Tape 4000 *1 L 180mm Embossed Tape 3000 *2 J 330mm Paper Tape 10000 *1 K 330mm Embossed Tape 10000 *2 B Bulk(Bag) 1000 t 1.25±0.2 2.0±0.3 (in mm) *1: only 0.1 to 2.2µH *2: only 2.7 to 4.7µH Dimension of t Inductance: 0.1 to 2.2µH 0.85±0.2 Inductance: 2.7 to 4.7µH 1.25±0.2 Refer to pages from p.107 to p.
PAGE 100
■ Q-Frequency Characteristics (Typ.) ■ Inductance-Current Characteristics (Typ.) 100 100 1.0µH 80 1.8µH 0.1µH 10 4.7µH 4.7µH Inductance (µH) 0.22µH Q 60 40 0 0.82µH 0.22µH 0.10µH 0.1 0.18µH 20 1.8µH 1.0µH 1 0.
PAGE 101
Inductor for Low Frequency Circuits LQH31M Wire Wound Magnetic Type LQH31M Series (1206 Size) ■ Dimensions 2.3±0.2 ■ Packaging 1.8±0.2 1.6±0.2 Code Packaging Minimum Quantity L 180mm Embossed Tape 2000 K 330mm Embossed Tape 7500 1.6±0.2 3.2±0.3 0.7 min. 0.7 min. 0.7 min. (in mm) Refer to pages from p.107 to p.110 for mounting information. Inductor for Power Lines (Power Inductor) 1206 Size, Wound Type Test Frequency Rated Current DC Resistance Q (min.
PAGE 102
Inductor for Low Frequency Circuits Wire Wound Magnetic Type Inductor for Power Lines (Power Inductor) LQH31M Inductance Test Frequency Rated Current DC Resistance Q (min.) Test Frequency Self Resonance Frequency (min.) LQH31MN100J03p 10µH±5% 1MHz 100mA 2.5ohm±30% 35 5MHz 20MHz LQH31MN100K03p 10µH±10% 1MHz 100mA 2.5ohm±30% 35 5MHz 20MHz LQH31MN120J03p 12µH±5% 1MHz 95mA 2.7ohm±30% 35 5MHz 18MHz LQH31MN120K03p 12µH±10% 1MHz 95mA 2.
PAGE 103
Inductor for Low Frequency Circuits LQH32M Wire Wound Magnetic Type LQH32M Series (1210 Size) ■ Dimensions ■ Packaging 2.5±0.2 2.0±0.2 2.5±0.2 Packaging Minimum Quantity L 180mm Embossed Tape 2000 K 330mm Embossed Tape 7500 2.5±0.2 3.2±0.3 0.9±0.3 1.3±0.2 Code 0.9±0.3 (in mm) Refer to pages from p.107 to p.110 for mounting information. Inductor for Power Lines (Power Inductor) 1210 Size, Wound Type Test Frequency Rated Current Max. of DC Resistance Q (min.
PAGE 104
Inductor for Low Frequency Circuits Wire Wound Magnetic Type Inductor for Power Lines (Power Inductor) LQH32M Inductance Test Frequency Rated Current Max. of DC Resistance Q (min.) Test Frequency Self Resonance Frequency (min.) LQH32MN560J23p 56µH±5% 1MHz 85mA 4.9ohm 40 1MHz 10MHz LQH32MN560K23p 56µH±10% 1MHz 85mA 4.9ohm 40 1MHz 10MHz LQH32MN680J23p 68µH±5% 1MHz 80mA 5.5ohm 40 1MHz 9MHz LQH32MN680K23p 68µH±10% 1MHz 80mA 5.
PAGE 105
Inductor for Low Frequency Circuits LQH43M/LQH43N Wire Wound Magnetic Type LQH43M/LQH43N Series (1812 Size) ■ Dimensions ■ Packaging 3.2±0.2 2.6±0.2 3.6±0.2 Minimum Quantity Code Packaging L 180mm Embossed Tape 500 K 330mm Embossed Tape 2500 3.2±0.2 4.5±0.3 (in mm) 1.0min. 1.0min. 1.0min. Refer to pages from p.107 to p.110 for mounting information. Inductor for Power Lines (Power Inductor) 1812 Size, Wound Type Test Frequency Rated Current Max. of DC Resistance Q (min.
PAGE 106
RF Inductor Inductor for Low Frequency Circuits Wire Wound Magnetic Type Inductor for Power Lines (Power Inductor) LQH43M/LQH43N Inductance Test Frequency Rated Current Max. of DC Resistance Q (min.) Test Frequency Self Resonance Frequency (min.) LQH43MN560J03p 56µH±5% 1MHz 200mA 1.7ohm 35 1MHz 9.3MHz LQH43MN560K03p 56µH±10% 1MHz 200mA 1.7ohm 35 1MHz 9.3MHz LQH43MN680J03p 68µH±5% 1MHz 180mA 1.9ohm 35 1MHz 8.4MHz LQH43MN680K03p 68µH±10% 1MHz 180mA 1.9ohm 35 1MHz 8.
PAGE 107
■ Q-Frequency Characteristics (Typ.) Inductor for Power Lines (Power Inductor) LQH43M/LQH43N ■ Inductance-Current Characteristics (Typ.) 10000 100 2200µH 80 1000µH 1000µH 1000 Inductance (µH) 390µH 60 Q 100µH 40 100µH 100 39µH 10µH 10µH 10 20 1 1 Frequency (MHz) 10 1 10 100 1000 Current (mA) RF Inductor Wire Wound Magnetic Type Inductor for Low Frequency Circuits 0 0.
PAGE 108
Inductor for Low Frequency Circuits !Caution/Notice !Caution Inductor for Power Lines (Power Inductor) ● Rating Do not use products beyond the rated current as this may create excessive heat. Notice ● Storage and Operating Condition !Caution/ Notice Inductor for Low Frequency Circuits Do not use products in chemical atmosphere such as chlorine gas, acid or sulfide gas. 1.
PAGE 109
Inductor for Low Frequency Circuits Soldering and Mounting 1. Standard Land Pattern Dimensions Inductor for Power Lines (Power Inductor) A high Q value is achieved when the PCB electrode land pattern is designed so that it does not project beyond the chip inductor (chip coil) electrode. Land Pattern + Solder Resist Land Pattern Solder Resist (in mm) Series Standard Land Dimensions LQM18N LQM21N LQH31M a Part Number Flow LQM18N c b LQH32M Reflow a b 0.7 2.2-2.6 1.8-2.0 c 0.7 LQM21N 1.0 3.
PAGE 110
Inductor for Low Frequency Circuits Soldering and Mounting (2) Soldering profile Temperature (°C) T3 T2 t2 Heating T1 Limit Profile Standard Profile Pre-heating t1 time (s) Standard Profile Pre-heating Series Limit Profile Heating Temp. (T1) Time. (t1) Temp. (T2) Time. (t2) LQM18N LQM21N LQH31M 150°C 60s min. 250°C 4 to 6s LQH32M LQH43M(N) 150°C 60s min. 250°C 4 to 6s Cycle of flow Heating Cycle of flow Temp. (T3) Time. (t2) 2 times max. 265±3°C 5s max. 2 times max.
PAGE 111
Inductor for Low Frequency Circuits Soldering and Mounting 3. Mounting Instructions Solder Resist Land Inductor for Power Lines (Power Inductor) (1) Land Pattern Dimensions Large lands reduce Q of the mounted chip. Also, large protruding land areas (bordered by lines having dimensions 'c' and 'd' shown) cause floating and electrode leaching.
PAGE 112
Soldering and Mounting (5) Amount of Adhesive If too much adhesive is applied, then it may overflow into the land or termination areas and yield poor solderability. In contrast, if insufficient adhesive is applied, or if the adhesive is not sufficiently hardened, then the chip may become detached during flow soldering. Apply the adhesive in accordance with the conditions shown in chart. LQH_M/N Part Number LQM Typical Application Amount (in:mg) IR-100 LQM18N 0.06-0.07 LQM21N 0.20-0.25 LQH31M 0.
PAGE 113
Inductor for Low Frequency Circuits Packaging ■ Minimum Quantity and 8mm Width Taping Dimensions 1.75±0.1 0.2 (8.0) b 3.5±0.05 a 4.0±0.1 4.0±0.1 Inductor for Power Lines (Power Inductor) ø1.5 +0.1 -0 c c Direction of feed 2.0±0.05 Dimension of the cavity of embossed tape is measured at the bottom side. Paper Tape Dimensions Part Number Packaging Code (Minimum Qty. [pcs.]) Total Thickness of Tape a b c ø180mm reel ø330mm reel Bulk LQM21N (0.1-2.2µH) 1.45 2.
PAGE 114
Inductor for Low Frequency Circuits Design Kits Inductor for Power Lines (Power Inductor) ■ Holder Type Inductor for Low Frequency Circuits oEKLMQM18B (for General Use Multilayer Type) No. Part Number Quantity (pcs.
PAGE 115
Inductor for Low Frequency Circuits Design Kits Part Number 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 LQH32MN3R3K23 LQH32MN3R9K23 LQH32MN4R7K23 LQH32MN5R6K23 LQH32MN6R8K23 LQH32MN8R2K23 LQH32MN100K23 LQH32MN120K23 LQH32MN150K23 LQH32MN180K23 LQH32MN220K23 LQH32MN270K23 LQH32MN330K23 LQH32MN390K23 LQH32MN470K23 LQH32MN560K23 LQH32MN680K23 LQH32MN820K23 LQH32MN101K23 LQH32MN121K23 LQH32MN151K23 LQH32MN181K23 LQH32MN221K23 LQH32MN271K23 LQH32MN331K23 LQH32MN391K23 LQH
PAGE 116
Inductor for Low Frequency Circuits Design Kits No. Part Number Quantity (pcs.) 34 35 36 37 38 39 40 41 LQH43MN561K03 LQH43MN681K03 LQH43MN821K03 LQH43MN102K03 LQH43MN122K03 LQH43MN152K03 LQH43NN182K03 LQH43NN222K03 10 10 10 10 10 10 10 10 Nominal 560µH 680µH 820µH 1000µH 1200µH 1500µH 1800µH 2200µH Inductance Tolerance ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10% DC Resistance (Ω) max. Rated Current (mA) 14.5 17.0 20.5 25.0 30.0 37.0 45.0 50.
PAGE 117
Inductor for Power Lines (Power Inductor) Inductor for Low Frequency Circuits RF Inductor aRF Inductor Introduction 116 Part Numbering 117 Product Detail 118 !Caution/Notice 165 Soldering and Mounting 167 Packaging 171 Design Kits 172 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
PAGE 118
Inductor for Power Lines (Power Inductor) cIntroduction of RF Inductor oApplication of RF Inductor For RF Choke For Matching LNA Vco RF Choke LNA Matching Matching High Q or tight inductance tolerance is required to improve signal quality. Especially, film type is suitable at receiver circuit because tight tolerance is required.
PAGE 119
RF Inductor Part Numbering LQ G 15 H N q w e r t S 1N0 y 0 2 D u i o !0 Product ID LQ Chip Inductors (Chip Coils) wStructure Code Structure G Multilayer Type (Air-core Inductor (Coil)) H Wire Wound Type (Ferrite Core) P Expressed by three-digit alphanumerics. The unit is micro-henry (µH). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures.
PAGE 120
RF Inductor LQG15HN Multilayer Non-Magnetic Type LQG15HN Series (0402 Size) Inductor for Power Lines (Power Inductor) 0402 Size, Multilayer Type ■ Dimensions ■ Packaging 0.25±0.1 0.5±0.05 Polarity Marking 1.0±0.05 Code Packaging Minimum Quantity D 180mm Paper Tape 10000 J 330mm Paper Tape 50000 B Bulk(Bag) 1000 0.5±0.05 (in mm) Refer to pages from p.167 to p.170 for mounting information. ■ Rated Value (p: packaging code) Inductance Test Frequency Rated Current Max.
PAGE 121
Inductance Test Frequency Rated Current Max. of DC Resistance Q (min.) Test Frequency Self Resonance Frequency (min.) LQG15HN33NJ02p 33nH±5% 100MHz 200mA 0.67ohm 8 100MHz 1500MHz LQG15HN39NJ02p 39nH±5% 100MHz 200mA 1.06ohm 8 100MHz 1200MHz LQG15HN47NJ02p 47nH±5% 100MHz 200mA 1.15ohm 8 100MHz 1000MHz LQG15HN56NJ02p 56nH±5% 100MHz 200mA 1.20ohm 8 100MHz 800MHz LQG15HN68NJ02p 68nH±5% 100MHz 180mA 1.25ohm 8 100MHz 800MHz LQG15HN82NJ02p 82nH±5% 100MHz 150mA 1.
PAGE 122
RF Inductor LQG15HS Multilayer Non-Magnetic Type LQG15HS Series (0402 Size) Inductor for Power Lines (Power Inductor) Designed under Industrial Global Standard ■ Dimensions ■ Packaging 0.25±0.1 0.5±0.05 Polarity Marking 1.0±0.05 Code Packaging Minimum Quantity D 180mm Paper Tape 10000 J 330mm Paper Tape 50000 B Bulk(Bag) 1000 0.5±0.05 (in mm) Refer to pages from p.167 to p.170 for mounting information.
PAGE 123
Inductance Test Frequency Rated Current Max. of DC Resistance Q (min.) Test Frequency Self Resonance Frequency (min.) LQG15HS33NJ02p 33nH±5% 100MHz 200mA 0.58ohm 8 100MHz 1600MHz LQG15HS39NJ02p 39nH±5% 100MHz 200mA 0.65ohm 8 100MHz 1200MHz LQG15HS47NJ02p 47nH±5% 100MHz 200mA 0.72ohm 8 100MHz 1000MHz LQG15HS56NJ02p 56nH±5% 100MHz 200mA 0.82ohm 8 100MHz 800MHz LQG15HS68NJ02p 68nH±5% 100MHz 180mA 0.92ohm 8 100MHz 800MHz LQG15HS82NJ02p 82nH±5% 100MHz 150mA 1.
PAGE 124
RF Inductor Multilayer Non-Magnetic Type Inductor for Low Frequency Circuits Inductor for Power Lines (Power Inductor) LQG15HS ■ Reference Data Q (Typ.) Inductance (nH) 100MHz 800MHz 900MHz 1.8GHz 2.0GHz 2.4GHz Rdc (Ω Typ.) SRF (MHz Typ.) LQG15HS1N0S02 1.0 32 34 51 54 57 0.03 11700 LQG15HS1N1S02 1.1 35 37 59 62 64 0.03 10000 LQG15HS1N2S02 1.2 34 36 56 58 60 0.03 8600 LQG15HS1N3S02 1.3 34 36 56 57 58 0.03 7000 LQG15HS1N5S02 1.5 31 34 50 53 55 0.
PAGE 125
RF Inductor LQG18H Multilayer Non-Magnetic Type LQG18H Series (0603 Size) ■ Dimensions ■ Packaging 0.3±0.2 0.8±0.15 Polarity Marking 1.6±0.15 Minimum Quantity Code Packaging D 180mm Paper Tape 4000 J 330mm Paper Tape 10000 B Bulk(Bag) 1000 0.8±0.15 (in mm) Refer to pages from p.167 to p.170 for mounting information. Inductor for Power Lines (Power Inductor) 0603 Size, Multilayer Type Test Frequency Rated Current Max. of DC Resistance Q (min.
PAGE 126
■ Q-Frequency Characteristics (Typ.) ■ Inductance-Frequency Characteristics (Typ.) 1000 200 68nH 160 Inductance (nH) 3.3nH Q 120 80 10nH 100 10 10nH 40 3.
PAGE 127
RF Inductor LQP02T Film Non-Magnetic Type LQP02T Series (01005 Size) ■ Dimensions ■ Packaging 0.20±0.02 Polarity Marking Code Packaging Minimum Quantity D 180mm Paper Tape 20000 B Bulk(Bag) 500 0.20±0.02 0.40±0.02 0.07 to 0.12 (in mm) Refer to pages from p.167 to p.170 for mounting information. Inductor for Power Lines (Power Inductor) 01005 Size Test Frequency Rated Current Max. of DC Resistance Q (min.) Test Frequency Self Resonance Frequency (min.) LQP02TN0N4S02p 0.4nH±0.
PAGE 128
Inductance Test Frequency Rated Current Max. of DC Resistance Q (min.) Test Frequency Self Resonance Frequency (min.) LQP02TN10NJ02p 10nH±5% 500MHz 140mA 3.60ohm 8 500MHz 4000MHz LQP02TN12NJ02p 12nH±5% 500MHz 140mA 3.90ohm 7 500MHz 3500MHz LQP02TN15NJ02p 15nH±5% 500MHz 140mA 4.35ohm 7 500MHz 3000MHz LQP02TN18NJ02p 18nH±5% 500MHz 140mA 4.80ohm 7 500MHz 2500MHz Part Number Operating Temperature Range: -40°C to +85°C Only for reflow soldering.
PAGE 129
LQP02T Part Number Inductance (nH) (Typ.) Inductor for Power Lines (Power Inductor) ■ Reference Data Q (Typ.) 900MHz 1.8GHz 2.0GHz 2.4GHz 800MHz 900MHz 1.8GHz 2.0GHz 2.4GHz 0.4 0.4 0.4 0.4 0.4 15 16 26 28 30 LQP02TN0N5 0.5 0.5 0.5 0.5 0.5 15 16 24 26 28 LQP02TN0N6 0.6 0.6 0.6 0.6 0.6 15 16 24 26 28 LQP02TN0N7 0.7 0.7 0.7 0.7 0.7 15 15 23 24 26 LQP02TN0N8 0.8 0.8 0.8 0.8 0.8 14 15 23 24 26 LQP02TN0N9 0.9 0.9 0.9 0.9 0.
PAGE 130
RF Inductor LQP03T_02 Film Non-Magnetic Type LQP03T_02 Series (0201 Size) ■ Dimensions ■ Packaging Polarity Marking Colored Side Polarity Marking Colored Side 0.3±0.03 68 to 120nH 0.3±0.03 0.6 to 56nH Packaging Minimum Quantity D 180mm Paper Tape 15000 J 330mm Paper Tape 50000 B Bulk(Bag) 500 0.6±0.03 0.3±0.03 0.6±0.03 Code 0.15±0.05 0.3±0.03 Inductor for Power Lines (Power Inductor) 0201 Size, High Q, Wide Variation 0.15±0.05 (in mm) Refer to pages from p.167 to p.
PAGE 131
Rated Current Max. of DC Resistance Q (min.) Test Frequency Self Resonance Frequency (min.) LQP03TN2N1B02p 2.1nH±0.1nH 500MHz 600mA 0.15ohm 14 500MHz 6000MHz LQP03TN2N1C02p 2.1nH±0.2nH 500MHz 600mA 0.15ohm 14 500MHz 6000MHz LQP03TN2N2B02p 2.2nH±0.1nH 500MHz 600mA 0.15ohm 14 500MHz 6000MHz LQP03TN2N2C02p 2.2nH±0.2nH 500MHz 600mA 0.15ohm 14 500MHz 6000MHz LQP03TN2N3B02p 2.3nH±0.1nH 500MHz 500mA 0.20ohm 14 500MHz 6000MHz LQP03TN2N3C02p 2.3nH±0.
PAGE 132
LQP03T_02 Inductance Test Frequency Rated Current Max. of DC Resistance Q (min.) Test Frequency Self Resonance Frequency (min.) LQP03TN5N6H02p 5.6nH±3% 500MHz 350mA 0.40ohm 14 500MHz 4000MHz LQP03TN5N6J02p 5.6nH±5% 500MHz 350mA 0.40ohm 14 500MHz 4000MHz LQP03TN6N2H02p 6.2nH±3% 500MHz 300mA 0.60ohm 14 500MHz 4000MHz LQP03TN6N2J02p 6.2nH±5% 500MHz 300mA 0.60ohm 14 500MHz 4000MHz LQP03TN6N8H02p 6.8nH±3% 500MHz 300mA 0.60ohm 14 500MHz 3900MHz LQP03TN6N8J02p 6.
PAGE 133
LQP03T_02 ■ Reference Data Inductance (nH) (Typ.) Q (Typ.) 900MHz 1.8GHz 2.0GHz 2.4GHz 800MHz 900MHz 1.8GHz 2.0GHz 2.4GHz LQP03TN0N6p02 0.7 0.7 0.7 0.7 0.7 35 min 42 min 62 min 65 min 71 min LQP03TN0N7p02 0.8 0.8 0.8 0.8 0.8 35 min 42 min 62 min 65 min 71 min LQP03TN0N8p02 0.9 0.9 0.9 0.9 0.9 35 min 42 min 62 min 65 min 71 min LQP03TN0N9p02 0.9 0.9 0.9 0.9 0.9 35 min 42 min 62 min 65 min 71 min LQP03TN1N0p02 1.0 1.0 1.0 1.0 1.
PAGE 134
RF Inductor LQP15T Film Non-Magnetic Type LQP15T Series (0402 Size) Inductor for Power Lines (Power Inductor) 0402 Size, High Q Film Type ■ Dimensions ■ Packaging 0.50±0.05 Polarity Marking Packaging Minimum Quantity D 180mm Paper Tape 10000 B Bulk(Bag) 500 0.40±0.05 1.00±0.05 Code 0.25±0.1 (in mm) Refer to pages from p.167 to p.170 for mounting information. ■ Rated Value (p: packaging code) Inductance Test Frequency Rated Current Max. of DC Resistance Q (min.
PAGE 135
■ Q-Frequency Characteristics (Typ.) ■ Inductance-Frequency Characteristics (Typ.) 80 100 2.0nH 60 18nH Inductance (nH) 3.9nH 8.2nH Q Inductor for Power Lines (Power Inductor) LQP15T 40 12nH 18nH 12nH 8.2nH 10 3.9nH 20 2.
PAGE 136
RF Inductor LQP15M Film Non-Magnetic Type LQP15M Series (0402 Size) Inductor for Power Lines (Power Inductor) 0402 Size, Tight Inductance Tolerance ■ Packaging 0.5±0.1 ■ Dimensions 0.35±0.1 1.0±0.1 Code Packaging Minimum Quantity D 180mm Paper Tape 10000 J 330mm Paper Tape 50000 B Bulk(Bag) 500 0.25±0.1 (in mm) Refer to pages from p.167 to p.170 for mounting information. ■ Rated Value (p: packaging code) Inductance Test Frequency Rated Current Max. of DC Resistance Q (min.
PAGE 137
Test Frequency Rated Current Max. of DC Resistance Q (min.) Test Frequency Self Resonance Frequency (min.) LQP15MN2N9W02p 2.9nH±0.05nH 500MHz 190mA 0.4ohm 13 500MHz 6000MHz LQP15MN3N0B02p 3.0nH±0.1nH 500MHz 190mA 0.4ohm 13 500MHz 6000MHz LQP15MN3N0W02p 3.0nH±0.05nH 500MHz 190mA 0.4ohm 13 500MHz 6000MHz LQP15MN3N1W02p 3.1nH±0.05nH 500MHz 190mA 0.4ohm 13 500MHz 6000MHz LQP15MN3N2W02p 3.2nH±0.05nH 500MHz 190mA 0.4ohm 13 500MHz 6000MHz LQP15MN3N3B02p 3.3nH±0.
PAGE 138
RF Inductor Film Non-Magnetic Type Inductor for Low Frequency Circuits Inductor for Power Lines (Power Inductor) LQP15M ■ Reference Data Part Number Inductance (nH) (Typ.) Q (Typ.) 800MHz 900MHz 1.8GHz 2.0GHz 2.4GHz 800MHz 900MHz 1.8GHz 2.0GHz 2.4GHz LQP15MN1N0 1.0 1.0 1.0 1.0 1.0 50 55 73 76 85 LQP15MN1N1 1.1 1.1 1.1 1.1 1.1 44 47 70 76 83 LQP15MN1N2 1.2 1.2 1.2 1.2 1.2 43 47 69 76 82 LQP15MN1N3 1.3 1.3 1.3 1.3 1.3 39 43 56 60 65 LQP15MN1N4 1.
PAGE 139
RF Inductor LQP18M Film Non-Magnetic Type LQP18M Series (0603 Size) ■ Packaging 0.8±0.15 ■ Dimensions 0.5±0.1 1.6±0.15 Minimum Quantity Code Packaging D 180mm Paper Tape 4000 J 330mm Paper Tape 10000 B Bulk(Bag) 500 0.2 min. (in mm) Refer to pages from p.167 to p.170 for mounting information. Inductor for Power Lines (Power Inductor) 0603 Size, Film Type ■ Rated Value (p: packaging code) Test Frequency Rated Current Max. of DC Resistance Q (min.
PAGE 140
■ Q-Frequency Characteristics (Typ.) ■ Inductance-Frequency Characteristics (Typ.) 200 1000 100nH 1.5nH 68nH 160 Inductance (nH) 33nH 120 Q 3.3nH 80 15nH 100 6.8nH 10 6.8nH 40 3.3nH 33nH 0 100 100nH 15nH 68nH 1000 Frequency (MHz) 10000 1 100 1.
PAGE 141
RF Inductor LQW04A Wire Wound Non-Magnetic Type (Horizontal Axis) LQW04A Series (03015 Size) ■ Dimensions ■ Packaging 0.4±0.05 0.06 -0.03 +0.09 0.8±0.05 Code Packaging Minimum Quantity D 180mm Paper Tape 10000 B Bulk(Bag) 500 0.4±0.05 0.15±0.05 (in mm) Refer to pages from p.167 to p.170 for mounting information. Inductor for Power Lines (Power Inductor) 03015 Size, Wound Type Test Frequency Rated Current Max. of DC Resistance Q (min.
PAGE 142
RF Inductor Wire Wound Non-Magnetic Type (Horizontal Axis) Inductor for Low Frequency Circuits Inductor for Power Lines (Power Inductor) LQW04A Inductance Test Frequency Rated Current Max. of DC Resistance Q (min.) Test Frequency Self Resonance Frequency (min.) LQW04AN9N1C00p 9.1nH±0.2nH 100MHz 400mA 0.16ohm 20 250MHz 7.0GHz LQW04AN9N1D00p 9.1nH±0.5nH 100MHz 400mA 0.16ohm 20 250MHz 7.0GHz LQW04AN10NH00p 10nH±3% 100MHz 330mA 0.26ohm 20 250MHz 7.
PAGE 143
■ Q-Frequency Characteristics (Typ.) ■ Inductance-Frequency Characteristics (Typ.) 100 120 33nH 27nH 22nH 1.1nH 100 60 Inductance (nH) 5.6nH 9.1nH 13nH 22nH 80 Q Inductor for Power Lines (Power Inductor) LQW04A 27nH 40 13nH 9.1nH 10 5.6nH 1.1nH 1 33nH 20 0 10 100 1000 0.1 10 10000 100 Frequency (MHz) 1000 10000 Frequency (MHz) ■ Reference Data Part Number Inductance (nH) Q (Typ.) 300MHz 800MHz 900MHz 1.5GHz 1.8GHz 2.0GHz 2.4GHz 1.
PAGE 144
RF Inductor LQW15A_00 Wire Wound Non-Magnetic Type (Horizontal Axis) LQW15A _00 Series (0402 Size) Inductor for Power Lines (Power Inductor) 0402 Size, Wound Type ■ Packaging 0.10±0.05 0.5±0.1 ■ Dimensions 0.5±0.1 1.0±0.1 W∗ Code Packaging Minimum Quantity D 180mm Paper Tape 10000 B Bulk(Bag) 500 ∗ W Inductance (nH) 0.6±0.1 1.5-23, 100, 120 0.5±0.1 24-91 0.2±0.1 0.2±0.1 (in mm) Refer to pages from p.167 to p.170 for mounting information.
PAGE 145
Rated Current Max. of DC Resistance Q (min.) Test Frequency Self Resonance Frequency (min.) LQW15AN5N8B00p 5.8nH±0.1nH 100MHz 700mA 0.12ohm 25 250MHz 8.0GHz LQW15AN5N8C00p 5.8nH±0.2nH 100MHz 700mA 0.12ohm 25 250MHz 8.0GHz LQW15AN5N8D00p 5.8nH±0.5nH 100MHz 700mA 0.12ohm 25 250MHz 8.0GHz LQW15AN6N2B00p 6.2nH±0.1nH 100MHz 700mA 0.09ohm 25 250MHz 8.0GHz LQW15AN6N2C00p 6.2nH±0.2nH 100MHz 700mA 0.09ohm 25 250MHz 8.0GHz LQW15AN6N2D00p 6.2nH±0.5nH 100MHz 700mA 0.
PAGE 146
RF Inductor Wire Wound Non-Magnetic Type (Horizontal Axis) Inductor for Low Frequency Circuits Inductor for Power Lines (Power Inductor) LQW15A_00 Inductance Test Frequency Rated Current Max. of DC Resistance Q (min.) Test Frequency Self Resonance Frequency (min.) LQW15AN16NJ00p 16nH±5% 100MHz 370mA 0.24ohm 25 250MHz 4.5GHz LQW15AN18NG00p 18nH±2% 100MHz 370mA 0.27ohm 25 250MHz 4.5GHz LQW15AN18NH00p 18nH±3% 100MHz 370mA 0.27ohm 25 250MHz 4.
PAGE 147
Test Frequency Rated Current Max. of DC Resistance Q (min.) Test Frequency Self Resonance Frequency (min.) LQW15AN51NH00p 51nH±3% 100MHz 210mA 1.08ohm 25 200MHz 2.85GHz LQW15AN51NJ00p 51nH±5% 100MHz 210mA 1.08ohm 25 200MHz 2.85GHz LQW15AN56NG00p 56nH±2% 100MHz 200mA 1.17ohm 25 200MHz 2.8GHz LQW15AN56NH00p 56nH±3% 100MHz 200mA 1.17ohm 25 200MHz 2.8GHz LQW15AN56NJ00p 56nH±5% 100MHz 200mA 1.17ohm 25 200MHz 2.8GHz LQW15AN62NG00p 62nH±2% 100MHz 145mA 1.
PAGE 148
LQW15A_00 RF Inductor Wire Wound Non-Magnetic Type (Horizontal Axis) Inductor for Low Frequency Circuits Inductor for Power Lines (Power Inductor) ■ Reference Data LQW15A_00 Part Number Inductance (nH) Q (Typ.) Nominal 300MHz 800MHz 900MHz 1.5GHz 1.8GHz 2.0GHz 2.4GHz LQW15AN1N5 1.5 30 55 60 65 90 100 115 LQW15AN2N4 2.4 40 65 67 80 98 108 120 LQW15AN2N5 2.5 40 65 67 88 90 100 110 LQW15AN2N7 2.7 40 67 73 85 100 105 120 LQW15AN2N9 2.
PAGE 149
RF Inductor LQW15A_10 Wire Wound Non-Magnetic Type (Horizontal Axis) LQW15A _10 Series (0402 Size) ■ Packaging 0.5±0.1 1.0±0.1 0.6±0.1 0.2±0.1 0.2±0.1 0.10±0.05 0.5±0.1 ■ Dimensions Code Packaging Minimum Quantity D 180mm Paper Tape 10000 B Bulk(Bag) 500 (in mm) Refer to pages from p.167 to p.170 for mounting information. Inductor for Power Lines (Power Inductor) 0402 Size, High Q Wound, Low DC Resistance Type Inductance Test Frequency Rated Current Max. of DC Resistance Q (min.
PAGE 150
■ Reference Data LQW15A_10 Part Number Inductance (nH) Q (Typ.) Nominal 800MHz 900MHz 1.0GHz 1.5GHz 1.8GHz 2.0GHz 2.4GHz LQW15AN1N3 1.3 90 95 100 130 145 160 180 LQW15AN2N2 2.2 85 90 95 115 130 140 160 LQW15AN2N4 2.4 80 85 90 110 130 140 160 LQW15AN3N3 3.3 80 85 90 110 120 128 140 LQW15AN3N4 3.4 80 85 90 110 120 128 140 LQW15AN3N6 3.6 73 75 85 100 110 115 130 LQW15AN3N9 3.9 75 80 83 95 110 115 120 LQW15AN4N7 4.
PAGE 151
RF Inductor LQW18A_00 Wire Wound Non-Magnetic Type (Horizontal Axis) LQW18A _00 Series (0603 Size) ■ Packaging 1.6±0.2 0.80±0.15 *1 0.8±0.2 0.2±0.1 0.8±0.2 ■ Dimensions Minimum Quantity Code Packaging D 180mm Paper Tape 4000 J 330mm Paper Tape 10000 B Bulk(Bag) 500 *1 LQW18AN_10: 0.8±0.3 0.3±0.1 0.3±0.1 (in mm) Refer to pages from p.167 to p.170 for mounting information. Inductor for Power Lines (Power Inductor) 0603 Size, Wound Type Test Frequency Rated Current Max.
PAGE 152
RF Inductor Wire Wound Non-Magnetic Type (Horizontal Axis) Inductor for Low Frequency Circuits Inductor for Power Lines (Power Inductor) LQW18A_00 Inductance Test Frequency Rated Current Max. of DC Resistance Q (min.) Test Frequency Self Resonance Frequency (min.) LQW18AN16NJ00p 16nH±5% 100MHz 550mA 0.16ohm 40 250MHz 5500MHz LQW18AN18NG00p 18nH±2% 100MHz 550mA 0.16ohm 40 250MHz 5500MHz LQW18AN18NJ00p 18nH±5% 100MHz 550mA 0.
PAGE 153
Test Frequency Rated Current Max. of DC Resistance Q (min.) Test Frequency Self Resonance Frequency (min.) LQW18ANR12J00p 120nH±5% 100MHz 180mA 1.3ohm 32 150MHz 1600MHz LQW18ANR13G00p 130nH±2% 100MHz 170mA 1.4ohm 32 150MHz 1450MHz LQW18ANR13J00p 130nH±5% 100MHz 170mA 1.4ohm 32 150MHz 1450MHz LQW18ANR15G00p 150nH±2% 100MHz 160mA 1.5ohm 32 150MHz 1400MHz LQW18ANR15J00p 150nH±5% 100MHz 160mA 1.5ohm 32 150MHz 1400MHz LQW18ANR16G00p 160nH±2% 100MHz 150mA 2.
PAGE 154
RF Inductor LQW18A_10 Wire Wound Non-Magnetic Type (Horizontal Axis) LQW18A _10 Series (0603 Size) Inductor for Power Lines (Power Inductor) 0603 Size, High Q Wound, Low DC Resistance Type ■ Packaging 1.6±0.2 0.80±0.15 *1 0.8±0.2 0.2±0.1 0.8±0.2 ■ Dimensions Minimum Quantity Code Packaging D 180mm Paper Tape 4000 J 330mm Paper Tape 10000 B Bulk(Bag) 500 *1 LQW18AN_10: 0.8±0.3 0.3±0.1 0.3±0.1 (in mm) Refer to pages from p.167 to p.170 for mounting information.
PAGE 155
■ Q-Frequency Characteristics (Typ.) Inductor for Power Lines (Power Inductor) LQW18A_10 ■ Inductance-Frequency Characteristics (Typ.) 100 200 2.2nH 33nH 150 Inductance (nH) Q 10nH 100 33nH 10nH 10 50 2.
PAGE 156
RF Inductor LQW2BH_03 Wire Wound Non-Magnetic Type (Vertical Axis) LQW2BH_03 Series (0805 Size) Inductor for Power Lines (Power Inductor) 0805 Size, Wound Type ■ Dimensions ■ Packaging 1.5±0.2 Code Packaging Minimum Quantity L 180mm Embossed Tape 2000 K 330mm Embossed Tape 7500 1.7 -0.1 +0.08 1.5±0.2 2.0±0.2 0.5 min. 1.5±0.2 0.5 min. 0.5 min. (in mm) Refer to pages from p.167 to p.170 for mounting information.
PAGE 157
Inductance Test Frequency LQW2BHNR22J03p 220nH±5% 100MHz 240mA 0.70ohm LQW2BHNR27J03p 270nH±5% 10MHz 190mA 2.00ohm LQW2BHNR27K03p 270nH±10% 10MHz 190mA 2.00ohm LQW2BHNR33J03p 330nH±5% 10MHz 180mA 2.20ohm LQW2BHNR33K03p 330nH±10% 10MHz 180mA LQW2BHNR39J03p 390nH±5% 10MHz 170mA LQW2BHNR39K03p 390nH±10% 10MHz LQW2BHNR47J03p 470nH±5% 10MHz LQW2BHNR47K03p 470nH±10% 10MHz Part Number Rated Current Max. of DC Resistance Q (min.
PAGE 158
RF Inductor LQW2BH_13 Wire Wound Non-Magnetic Type (Vertical Axis) LQW2BH_13 Series (0805 Size) Inductor for Power Lines (Power Inductor) 0805 Size, High Q Wound, Low DC Resistance Type ■ Dimensions ■ Packaging 1.5±0.2 Code Packaging Minimum Quantity L 180mm Embossed Tape 2000 K 330mm Embossed Tape 7500 1.7 -0.1 +0.08 1.5±0.2 2.0±0.2 1.5±0.2 0.5 min. 0.5 min. 0.5 min. (in mm) Refer to pages from p.167 to p.170 for mounting information.
PAGE 159
RF Inductor LQW2BA Wire Wound Non-Magnetic Type (Horizontal Axis) LQW2BA Series (0805 Size) ■ Dimensions ■ Packaging 2.09±0.2 1.53±0.2 Packaging Minimum Quantity L 180mm Embossed Tape 2000 1.42±0.1 0.25±0.15 Code 1.5±0.2 0.5±0.1 (in mm) Refer to pages from p.167 to p.170 for mounting information. Inductor for Power Lines (Power Inductor) 0805 Size, Horizontal Wound Type Test Frequency Rated Current Max. of DC Resistance Q (min.) Test Frequency Self Resonance Frequency (min.
PAGE 160
Inductor for Power Lines (Power Inductor) LQW2BA Inductance Test Frequency Rated Current Max. of DC Resistance Q (min.) Test Frequency Self Resonance Frequency (min.) LQW2BASR33J00p 330nH±5% - 310mA 1.40ohm 48 - 650MHz LQW2BASR39J00p 390nH±5% - 290mA 1.50ohm 48 - 600MHz Part Number LQW2BASR47J00p 470nH±5% - 250mA 1.76ohm 33 - 300MHz LQW2BASR56J00p 560nH±5% - 230mA 1.90ohm 23 - 270MHz LQW2BASR68J00p 680nH±5% - 190mA 2.
PAGE 161
RF Inductor LQW2UA Wire Wound Non-Magnetic Type (Horizontal Axis) LQW2UA Series (1008 Size) ■ Packaging 2.45±0.2 1.83±0.2 2.62±0.3 Code Packaging Minimum Quantity L 180mm Embossed Tape 2000 0.25±0.15 ■ Dimensions 2.3±0.2 (in mm) 0.6±0.1 Refer to pages from p.167 to p.170 for mounting information. Inductor for Power Lines (Power Inductor) 1008 Size, Wound Type Test Frequency Rated Current Max. of DC Resistance Q (min.) Test Frequency Self Resonance Frequency (min.
PAGE 162
Part Number Test Frequency Inductance Rated Current Max. of DC Resistance Q (min.) Test Frequency Self Resonance Frequency (min.) LQW2UAS2R7J00p 2700nH±5% - 290mA 3.2ohm 22 - 110MHz LQW2UAS3R3J00p 3300nH±5% - 290mA 3.4ohm 22 - 90MHz LQW2UAS3R9J00p 3900nH±5% - 260mA 3.6ohm 20 - 70MHz LQW2UAS4R7J00p 4700nH±5% - 260mA 4ohm 20 - 60MHz Operating Temperature Range: -55°C to +125°C Only for reflow soldering. ■ Q-Frequency Characteristics (Typ.
PAGE 163
RF Inductor LQW31H Wire Wound Non-Magnetic Type (Vertical Axis) LQW31H Series (1206 Size) ■ Dimensions 2.3±0.2 ■ Packaging 1.8±0.2 1.6±0.2 Code Packaging Minimum Quantity L 180mm Embossed Tape 2000 K 330mm Embossed Tape 7500 1.6±0.2 3.2±0.3 (in mm) 0.7 min. 0.7 min. 0.7 min. Refer to pages from p.167 to p.170 for mounting information. Inductor for Power Lines (Power Inductor) 1206 Size, Wound Type ■ Rated Value (p: packaging code) Test Frequency Rated Current DC Resistance Q (min.
PAGE 164
■ Q-Frequency Characteristics (Typ.) 120 8.8nH 39nH 100 Q 80 60 40 20 100nH 0 10 100 1000 10000 Frequency (MHz) RF Inductor Wire Wound Non-Magnetic Type (Vertical Axis) Inductor for Low Frequency Circuits Inductor for Power Lines (Power Inductor) LQW31H !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
PAGE 165
RF Inductor LQW21H_00 Wire Wound Magnetic Type (Horizontal Axis) LQW21H_00 Series (0805 Size) ■ Dimensions ■ Packaging 0.9±0.1 0.15±0.1 2.0±0.2 Code Packaging Minimum Quantity L 180mm Embossed Tape 3000 B Bulk(Bag) 500 1.2±0.2 0.45±0.1 (in mm) Refer to pages from p.167 to p.170 for mounting information. Inductor for Power Lines (Power Inductor) 0805 Size, Ferrite Core High Frequency Wound Type ■ Rated Value (p: packaging code) Test Frequency Rated Current Max.
PAGE 166
RF Inductor LQH31H Wire Wound Magnetic Type (Vertical Axis) LQH31H Series (1206 Size) Inductor for Power Lines (Power Inductor) 1206 Size, Ferrite Core High Frequency Wound Type ■ Dimensions 2.3±0.2 ■ Packaging 1.8±0.2 1.6±0.2 Code Packaging Minimum Quantity L 180mm Embossed Tape 2000 K 330mm Embossed Tape 7500 1.6±0.2 3.2±0.3 (in mm) 0.7 min. 0.7 min. 0.7 min. Refer to pages from p.167 to p.170 for mounting information.
PAGE 167
RF Inductor !Caution/Notice !Caution Inductor for Power Lines (Power Inductor) ● Rating Do not use products beyond the rated current as this may create excessive heat. Notice ● Handling This item is designed to have sufficient strength, but handle with care to avoid chipping or breaking its ceramic structure. LQW_A/LQW_H series • To prevent breaking the wire, avoid touching with sharp material, such as tweezers or other material such as bristles of cleaning brush, to the wire wound portion.
PAGE 168
!Caution/Notice RF Inductor ● Measuring Method Inductor for Power Lines (Power Inductor) Measuring Method of Inductance/Q 1. Residual elements and stray elements of test fixture can be described by F-parameter as shown in the following: I1 I2 A Zm B C Test Head Zx V2 V1 D Test fixture V1 = I1 A B V2 C D I2 Product 2. The impedance of chip inductor (chip coil) Zx and measured value Zm can be described by input/output current/voltage. Zm = V1 I1 , Zx = V2 I2 3.
PAGE 169
RF Inductor Soldering and Mounting 1. Standard Land Pattern Dimensions Inductor for Power Lines (Power Inductor) A high Q value is achieved when the PCB electrode land pattern is designed so that it does not project beyond the chip inductor (chip coil) electrode. Land Pattern + Solder Resist Land Pattern Solder Resist (in mm) Part Number a b c LQG15H 0.5-0.6 1.4-1.5 0.4 LQG18H 0.6-0.8 1.8-2.2 0.6-0.8 LQP02T 0.2-0.23 0.4-0.56 0.16-0.2 LQP03T 0.2-0.3 0.8-0.9 0.2-0.3 LQP15M/15T 0.
PAGE 170
RF Inductor Soldering and Mounting (2) Soldering profile Temperature (°C) Inductor for Power Lines (Power Inductor) "Flow Soldering profile (Sn-3.0Ag-0.5Cu solder) T3 T2 t2 Heating T1 Limit Profile Standard Profile Pre-heating t1 Standard Profile Pre-heating Series LQW2BH/31H LQH31H time (s) Limit Profile Heating Temp. (T1) Time. (t1) Temp. (T2) Time. (t2) 150°C 60s min. 250°C 4 to 6s Cycle of flow Heating Temp. (T3) Time. (t2) 265±3°C 5s max. 2 times max.
PAGE 171
RF Inductor Soldering and Mounting 3. Mounting Instructions Solder Resist Land Inductor for Power Lines (Power Inductor) (1) Land Pattern Dimensions Large lands reduce Q of the mounted chip. Also, large protruding land areas (bordered by lines having dimensions 'c' and 'd' shown) cause floating and electrode leaching. c d (2) PCB Warping Products should be located in the sideways direction (Length: a
PAGE 172
Soldering and Mounting (4) Amount of Adhesive If too much adhesive is applied, then it may overflow into the land or termination areas and yield poor solderability. In contrast, if insufficient adhesive is applied, or if the adhesive is not sufficiently hardened, then the chip may become detached during flow soldering. Apply the adhesive in accordance with the conditions shown in chart. LQW_H Part Number Typical Application Amount (in:mg) IR-100 LQW2BH 0.15-0.20 LQH31H LQW31H 0.20-0.25 4.
PAGE 173
Packaging RF Inductor a LQG15H, LQP15M/18M LQP02T/03T/15T, LQW04A/15A c c Inductor for Power Lines (Power Inductor) b 3.5±0.05 ø1.5 +0.1 -0 (8.0) 2.0±0.05 2.0±0.05 4.0±0.1 1.75±0.1 ■ Minimum Quantity and 8mm Width Taping Dimensions Direction of feed Paper Tape Total Thickness of Tape a b Packaging Code (Minimum Qty. [pcs.]) c ø180mm reel ø330mm reel Bulk LQG15H 0.62 1.12 0.8 max. D [10000] J [50000] B [1000] LQP02T 0.24 0.455 0.39 max.
PAGE 174
Design Kits RF Inductor Inductor for Power Lines (Power Inductor) ■ Holder Type RF Inductor Inductor for Low Frequency Circuits oEKLMQ15SC (High Frequency Multilayer Type) No. Part Number Quantity (pcs.
PAGE 175
RF Inductor Design Kits No. Part Number 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 LQG18HN6N8J00 LQG18HN8N2J00 LQG18HN10NJ00 LQG18HN12NJ00 LQG18HN15NJ00 LQG18HN18NJ00 LQG18HN22NJ00 LQG18HN27NJ00 LQG18HN33NJ00 LQG18HN39NJ00 LQG18HN47NJ00 LQG18HN56NJ00 LQG18HN68NJ00 LQG18HN82NJ00 LQG18HNR10J00 Quantity (pcs.) 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 Inductance Nominal Tolerance 6.8nH ±5% 8.
PAGE 176
RF Inductor Design Kits RF Inductor Inductor for Low Frequency Circuits Inductor for Power Lines (Power Inductor) Continued from the preceding page. No. Part Number Quantity (pcs.
PAGE 177
RF Inductor Design Kits Continued from the preceding page. Part Number Quantity (pcs.) 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 LQP15MN3N3B02 LQP15MN3N6B02 LQP15MN3N9B02 LQP15MN4N3B02 LQP15MN4N7B02 LQP15MN5N1B02 LQP15MN5N6B02 LQP15MN6N2B02 LQP15MN6N8B02 LQP15MN7N5B02 LQP15MN8N2B02 LQP15MN9N1B02 LQP15MN10NG02 LQP15MN12NG02 LQP15MN15NG02 LQP15MN18NG02 LQP15MN22NG02 LQP15MN27NG02 LQP15MN33NG02 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 Inductance Nominal Tolerance 3.3nH 0.
PAGE 178
RF Inductor Design Kits RF Inductor Inductor for Low Frequency Circuits Inductor for Power Lines (Power Inductor) Continued from the preceding page. No. Part Number Quantity (pcs.
PAGE 179
RF Inductor Design Kits Continued from the preceding page. Quantity (pcs.
PAGE 180
RF Inductor Design Kits Inductor for Power Lines (Power Inductor) Continued from the preceding page. No. Part Number Quantity (pcs.
PAGE 181
RF Inductor Design Kits Continued from the preceding page.
PAGE 182
Memo !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. O05E.pdf Oct.
PAGE 183
Part Number Quick Reference Inductor for Power Lines (Power Inductor) Inductor for Low Frequency Circuits RF Inductor LQH2MC p.33 LQH31M p.99 LQG15H p.118 LQH2HP p.37 LQH32M p.101 LQG18H p.123 LQH3NP p.39 LQH43M p.103 LQH31H p.164 LQH31C p.68 LQH43N p.103 LQP02T p.125 LQH32C p.69 LQM18N p.95 LQP03T p.128 LQH32P p.46 LQM21N p.97 LQP15M p.134 LQH43C p.72 LQP15T p.132 LQH43P p.50 LQP18M p.137 LQH44P p.52 LQW04A p.139 LQH5BP p.56 LQW15A p.142 LQH55D p.
PAGE 184
http://ds.murata.co.jp/software/simsurfing/en-us/ !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. O05E.pdf Oct.
PAGE 185
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. O05E.pdf Oct.
PAGE 186
Cat. No. O05E-23 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. O05E.pdf Oct.