Datasheet

LQW15CSeries (0402 Size)
Wire Wound Magnetic Type for Choke
Inductor for Power Lines (Power Inductor)
LQW15C
For RF Choke
■ Dimensions ■ Packaging
■ Rated Value (p: packaging code)
Refer to pages from p.80 to p.83 for mounting information.
■ Impedance-Frequency Characteristics (Typ.) ■ Inductance-Current Characteristics (Typ.)
Code Packaging
Minimum
Quantity
D 180mm Paper Tape 10000
B Bulk(Bag) 500
Part Number Inductance Test Frequency Rated Current Max. of DC Resistance Self Resonance Frequency (min.)
LQW15CN18NJ00p
18nH±5% 100MHz 1400mA 0.046ohm 3000MHz
LQW15CN33NJ00p 33nH±5% 100MHz 1300mA 0.065ohm 1800MHz
LQW15CN48NJ00p 48nH±5% 100MHz 1100mA 0.078ohm 1400MHz
LQW15CN70NJ00p 70nH±5% 100MHz 820mA 0.12ohm 1300MHz
LQW15CN96NJ00p 96nH±5% 100MHz 730mA 0.16ohm 1100MHz
LQW15CNR13J00p 130nH±5% 100MHz 640mA 0.23ohm 1000MHz
LQW15CNR16J00p 160nH±5% 100MHz 480mA 0.33ohm 900MHz
LQW15CNR20J00p 200nH±5% 100MHz 390mA 0.47ohm 800MHz
Class of Magnetic Shield: No magnetic shield
Operating Temperature Range:
-55°C to +125°C (Ambient temperature: self-temperature rise is not included), -55°C to +135 °C (Product temperature: self-temperature rise is included)
Only for reflow soldering.
1.0±0.1
0.5±0.1
(0.1)
0.3±0.1 0.3±0.1
(in mm)
0.5±0.1
0.55±0.1
96nH
48nH
18nH
200nH
1
10
100
1000
10000
1 10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
96nH
48nH
18nH
200nH
10
100
1000
10 1000100 10000
Current (mA)
Inductance (nH)
Derating
0
50
100
Current Derating (%)
Operating Temperature (°C)
125850
In operating temperature exceeding +85°C, derating of
current is necessary for LQW15C Series.
Please apply the derating curve shown in chart according to
the opeating temperature.
■ Notice (Rating)
66
Wire Wound Magnetic Type for Voltage Conversion
Inductor for Power Lines (Power Inductor)Inductor for Low Frequency CircuitsRF Inductor
!Note
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
O05E.pdf
Oct.13,2011