Datasheet

ManualsBrandsMURATA ManualsCoils & ChokesInductor SMD 1210 22 µH 0.15 A 1 pc(s)

http://www.murata.com/

Data Sheet

Note:

1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our

products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.

2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product

specifications or transact the approval sheet for product specifications before ordering.

o This data sheet is applied for CHIP COIL used for General Electronics equipment for your design.

2006.3.9

Coils/Inductors/Transfomers > Chip Coils > for General Use Wire Wound Type

(in mm)

2.5±0.2 2.5±0.2

2.0±0.2

2.5±0.2

3.2±0.3

0.9±0.3 1.3±0.2 0.9±0.3

Chip Coils for General Use Wire Wound Type

LQH32M Series (1210 Size)

■ Dimensions ■ Packaging

Code Packaging Minimum Quantity

L 180mm Embossed Tape 2000

K 330mm Embossed Tape 7500

■ Rated Value (p: packaging code)

Part Number Inductance Test Frequency Rated Current Max. of DC resistance Q (min.) Test Frequency Self Resonance Frequency (min.)

LQH32MN1R0M23p

1.0µH±20% 1MHz 445mA 0.5ohm 20 1MHz 100MHz

LQH32MN1R2M23p

1.2µH±20% 1MHz 425mA 0.6ohm 20 1MHz 100MHz

LQH32MN1R5K23p

1.5µH±10% 1MHz 400mA 0.6ohm 20 1MHz 75MHz

LQH32MN1R8K23p

1.8µH±10% 1MHz 390mA 0.7ohm 20 1MHz 60MHz

LQH32MN2R2K23p

2.2µH±10% 1MHz 370mA 0.8ohm 20 1MHz 50MHz

LQH32MN2R7K23p

2.7µH±10% 1MHz 320mA 0.9ohm 20 1MHz 43MHz

LQH32MN3R3K23p

3.3µH±10% 1MHz 300mA 1.0ohm 20 1MHz 38MHz

LQH32MN3R9K23p

3.9µH±10% 1MHz 290mA 1.1ohm 20 1MHz 35MHz

LQH32MN4R7K23p

4.7µH±10% 1MHz 270mA 1.2ohm 20 1MHz 31MHz

LQH32MN5R6K23p

5.6µH±10% 1MHz 250mA 1.3ohm 20 1MHz 28MHz

LQH32MN6R8K23p

6.8µH±10% 1MHz 240mA 1.5ohm 20 1MHz 25MHz

LQH32MN8R2K23p

8.2µH±10% 1MHz 225mA 1.6ohm 20 1MHz 23MHz

LQH32MN100J23p

10µH±5% 1MHz 190mA 1.8ohm 35 1MHz 20MHz

LQH32MN100K23p

10µH±10% 1MHz 190mA 1.8ohm 35 1MHz 20MHz

LQH32MN120J23p

12µH±5% 1MHz 180mA 2.0ohm 35 1MHz 18MHz

LQH32MN120K23p

12µH±10% 1MHz 180mA 2.0ohm 35 1MHz 18MHz

LQH32MN150J23p

15µH±5% 1MHz 170mA 2.2ohm 35 1MHz 16MHz

LQH32MN150K23p

15µH±10% 1MHz 170mA 2.2ohm 35 1MHz 16MHz

LQH32MN180J23p

18µH±5% 1MHz 165mA 2.5ohm 35 1MHz 15MHz

LQH32MN180K23p

18µH±10% 1MHz 165mA 2.5ohm 35 1MHz 15MHz

LQH32MN220J23p

22µH±5% 1MHz 150mA 2.8ohm 35 1MHz 14MHz

LQH32MN220K23p

22µH±10% 1MHz 150mA 2.8ohm 35 1MHz 14MHz

LQH32MN270J23p

27µH±5% 1MHz 125mA 3.1ohm 35 1MHz 13MHz

LQH32MN270K23p

27µH±10% 1MHz 125mA 3.1ohm 35 1MHz 13MHz

Operating Temperature Range: -25°C to +85°C

Continued on the following page.

Summary of content (3 pages)

PAGE 1
Coils/Inductors/Transfomers > Chip Coils > for General Use Wire Wound Type Data Sheet Chip Coils 1 for General Use Wire Wound Type LQH32M Series (1210 Size) ■ Dimensions ■ Packaging 2.5±0.2 2.0±0.2 2.5±0.2 Packaging Minimum Quantity L 180mm Embossed Tape 2000 K 330mm Embossed Tape 7500 2.5±0.2 3.2±0.3 0.9±0.3 1.3±0.2 Code 0.9±0.3 (in mm) ■ Rated Value (p: packaging code) Part Number Inductance Test Frequency Rated Current Max. of DC resistance Q (min.
PAGE 2
Coils/Inductors/Transfomers > Chip Coils > for General Use Wire Wound Type Data Sheet 2 Continued from the preceding page. Part Number Inductance Test Frequency Rated Current Max. of DC resistance Q (min.) Test Frequency Self Resonance Frequency (min.) LQH32MN330J23p 33µH±5% 1MHz 115mA 3.5ohm 40 1MHz 12MHz LQH32MN330K23p 33µH±10% 1MHz 115mA 3.5ohm 40 1MHz 12MHz LQH32MN390J23p 39µH±5% 1MHz 110mA 3.9ohm 40 1MHz 11MHz LQH32MN390K23p 39µH±10% 1MHz 110mA 3.
PAGE 3
Coils/Inductors/Transfomers > Chip Coils > for General Use Wire Wound Type Data Sheet 3 Continued from the preceding page. ■ Q-Frequency Characteristics (Typ.) ■ Inductance-Currrent Characteristics (Typ.) 100 500 220µH 80 100µH 100µH 10µH 100 60 Q 39µH 50 Inductance (µH) 1µH 40 20 10µH 10 0 3.9µH 0.1 0.5 1 5 5 10 Frequency (MHz) 1.