Datasheet

LQH32P
_
NCSeries (1210 Size)
Wire Wound Magnetic Type for Voltage Conversion
Inductor for Power Lines (Power Inductor)
LQH32P_NC
Bias Current Characteristics Improved
■ Dimensions ■ Packaging
■ Rated Value (p: packaging code)
Refer to pages from p.80 to p.83 for mounting information.
■ Inductance-Frequency Characteristics (Typ.) ■ Inductance-Current Characteristics (Typ.)
Continued on the following page.
Code Packaging
Minimum
Quantity
L 180mm Embossed Tape 2000
K 330mm Embossed Tape 7500
Part Number Inductance
Rated Current
(Based on Inductance Change)
Rated Current
(Based on Temperature Rise)
DC Resistance
Self Resonance
Frequency (min.)
LQH32PNR47NNCp
0.47µH±30% 4400mA 2900mA 0.024ohm ±20% 100MHz
LQH32PN1R0NNCp 1.0µH±30% 3000mA 2500mA 0.036ohm ±20% 100MHz
LQH32PN1R5NNCp 1.5µH±30% 2600mA 2100mA 0.053ohm ±20% 70MHz
LQH32PN2R2NNCp 2.2µH±30% 2000mA 1850mA 0.064ohm ±20% 70MHz
LQH32PN3R3NNCp 3.3µH±30% 1900mA 1550mA 0.100ohm ±20% 50MHz
LQH32PN4R7NNCp 4.7µH±30% 1600mA 1200mA 0.155ohm ±20% 40MHz
LQH32PN6R8NNCp 6.8µH±30% 1300mA 1100mA 0.220ohm ±20% 40MHz
LQH32PN100MNCp 10µH±20% 1000mA 900mA 0.295ohm ±20% 30MHz
LQH32PN150MNCp 15µH±20% 800mA 700mA 0.475ohm ±20% 20MHz
LQH32PN220MNCp 22µH±20% 650mA 550mA 0.685ohm ±20% 20MHz
Test Frequency: 1MHz Class of Magnetic Shield: Magnetic shield of magnetic powder in resin
Operating Temperature Range (Self-temperature rise is included): -40°C to +125°C
Operating Temperature Range (Self-temperature rise is not included): -40°C to +85°C
Only for reflow soldering.
*1 When Rated Current is applied to the Products, Inductance will be within ±30% of nominal Inductance value.
*2 When Rated Current is applied to the Products, self-generation of heat will rise to 40°C or less.
*1 *2
0.1
1
10
100
1000
0.1 1 10 100 1000
Frequency (MHz)
Inductance (µH)
22µH
15µH
10µH
6.8µH
4.7µH
3.3µH
2.2µH
1.5µH
1.0µH
0.47µH
0.1
1
10
100
1000
10 100 1000 10000
Current (mA)
Inductance (µH)
22µH
15µH
10µH
6.8µH
4.7µH
3.3µH
2.2µH
1.5µH
1.0µH
0.47µH
2.7±0.2
(in mm)
3.2±0.3
2.5±0.2
2.5±0.2
1.3±0.2
0.9±0.30.9±0.3
1.55±0.15
48
Wire Wound Magnetic Type for Voltage Conversion
Inductor for Power Lines (Power Inductor)Inductor for Low Frequency CircuitsRF Inductor
!Note
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
O05E.pdf
Oct.13,2011