Datasheet

LQH2MC
_
52Series (0806 Size)
Wire Wound Magnetic Type for Voltage Conversion
Inductor for Power Lines (Power Inductor)
LQH2MC_52
0806 Size, 0.7mm max. Thickness
■ Dimensions ■ Packaging
■ Rated Value (p: packaging code)
Refer to pages from p.80 to p.83 for mounting information.
■ Inductance-Frequency Characteristics (Typ.) ■ Inductance-Current Characteristics (Typ.)
Continued on the following page.
Code Packaging
Minimum
Quantity
L 180mm Embossed Tape 3000
B Bulk(Bag) 100
Part Number Inductance
Rated Current
(Based on Inductance Change)
Rated Current
(Based on Temperature Rise)
DC Resistance
Self Resonance
Frequency (min.)
LQH2MCN1R0M52p
1.0µH±20% - 595mA 0.25ohm±30% 215MHz
LQH2MCN1R5M52p 1.5µH±20% - 540mA 0.33ohm±30% 165MHz
LQH2MCN2R2M52p 2.2µH±20% - 500mA 0.42ohm±30% 125MHz
LQH2MCN3R3M52p 3.3µH±20% - 360mA 0.74ohm±30% 110MHz
LQH2MCN4R7M52p 4.7µH±20% - 335mA 0.91ohm±30% 90MHz
LQH2MCN6R8M52p 6.8µH±20% - 285mA 1.23ohm±30% 65MHz
LQH2MCN100M52p 10µH±20% - 200mA 2.27ohm±30% 60MHz
LQH2MCN120M52p 12µH±20% - 170mA 2.4ohm±30% 30MHz
LQH2MCN150M52p 15µH±20% - 150mA 3.5ohm±30% 30MHz
LQH2MCN180M52p 18µH±20% - 140mA 4ohm±30% 30MHz
LQH2MCN220M52p 22µH±20% - 130mA 5.5ohm±30% 30MHz
Test Frequency: 1MHz Class of Magnetic Shield: No magnetic shield
Operating Temperature Range (Self-temperature rise is not included): -40°C to +85°C
Only for reflow soldering.
*1 When Rated Current is applied to the Products, self-generation of heat will rise to 40°C or less.
*1
(in mm)
2.0±0.2
0.6±0.2 0.8±0.2 0.6±0.2
1.6±0.2
0.65±0.05
Inductance (µH)
Frequency (MHz)
0.1
1
10
100
0.1 1 10 100 1000
1.0µH
2.2µH
4.7µH
10µH
22µH
Inductance (µH)
0.1
1
10
100
10 100 1000
Current (mA)
1.0µH
2.2µH
4.7µH
10µH
22µH
35
Wire Wound Magnetic Type for Voltage Conversion
Inductor for Power Lines (Power Inductor)Inductor for Low Frequency CircuitsRF Inductor
!Note
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
O05E.pdf
Oct.13,2011