Datasheet

LQH2HP
_
G0Series (1008 Size)
Wire Wound Magnetic Type for Voltage Conversion
Inductor for Power Lines (Power Inductor)
LQH2HP_G0
1008 Size, 1.0mm max. Thickness
■ Dimensions ■ Packaging
■ Rated Value (p: packaging code)
Refer to pages from p.80 to p.83 for mounting information.
■ Inductance-Frequency Characteristics (Typ.) ■ Inductance-Current Characteristics (Typ.)
Continued on the following page.
Code Packaging
Minimum
Quantity
L 180mm Embossed Tape 3000
Part Number Inductance
Rated Current
(Based on Inductance Change)
Rated Current
(Based on Temperature Rise)
DC Resistance
Self Resonance
Frequency (min.)
LQH2HPN2R2MG0p
2.2µH±20% 1640mA 1000mA 0.17ohm ±20% 80MHz
LQH2HPN3R3MG0p 3.3µH±20% 1290mA 810mA 0.27ohm ±20% 65MHz
LQH2HPN4R7MG0p 4.7µH±20% 1000mA 700mA 0.36ohm ±20% 60MHz
LQH2HPN6R8MG0p 6.8µH±20% 800mA 590mA 0.5ohm ±20% 10MHz
LQH2HPN100MG0p 10µH±20% 700mA 490mA 0.73ohm ±20% 10MHz
LQH2HPN220MG0p 22µH±20% 490mA 340mA 1.6ohm ±20% 10MHz
LQH2HPN101MG0p 100µH±20% 210mA 130mA 10ohm ±20% 5MHz
Test Frequency: 1MHz Class of Magnetic Shield: Magnetic shield of magnetic powder in resin
Operating Temperature Range (Self-temperature rise is not included): -40°C to +85°C
Only for reflow soldering.
*1 When Rated Current is applied to the Products, Inductance will be within -30% of minimum rated Inductance value.
*2 When Rated Current is applied to the Products, self-generation of heat will rise to 40°C or less.
*1 *2
2.5±0.2
0.85±0.3 0.85±0.3
(in mm)
0.9±0.1
2.0±0.2
Polarity Marking
0.1
1
10
100
1000
0.1 1 10 100 1000
Frequency (MHz)
Inductance (µH)
100µH
22µH
10µH
6.8µH
4.7µH
3.3µH
2.2µH
0.1
1
10
100
1000
10 100 1000 10000
Current (mA)
Inductance (µH)
100µH
22µH
10µH
6.8µH
4.7µH
3.3µH
2.2µH
37
Wire Wound Magnetic Type for Voltage Conversion
Inductor for Power Lines (Power Inductor)Inductor for Low Frequency CircuitsRF Inductor
!Note
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
O05E.pdf
Oct.13,2011