Datasheet

LQH44P
_
J0Series (1515 Size)
Wire Wound Magnetic Type for Voltage Conversion
Inductor for Power Lines (Power Inductor)
LQH44P_J0
1515 Size, 1.2mm max. Thickness
■ Dimensions ■ Packaging
■ Rated Value (p: packaging code)
Refer to pages from p.80 to p.83 for mounting information.
■ Inductance-Frequency Characteristics (Typ.) ■ Inductance-Current Characteristics (Typ.)
Continued on the following page.
Code Packaging
Minimum
Quantity
L 180mm Embossed Tape 1000
K 330mm Embossed Tape 3500
Part Number Inductance
Rated Current
(Based on Inductance Change)
Rated Current
(Based on Temperature Rise)
DC Resistance
Self Resonance
Frequency (min.)
LQH44PN1R0NJ0p
1.0µH±30% 2000mA 1530mA 0.048ohm ±20% 130MHz
LQH44PN1R5MJ0p 1.5µH±20% 1600mA 1380mA 0.061ohm ±20% 90MHz
LQH44PN2R2MJ0p 2.2µH±20% 1320mA 1230mA 0.074ohm ±20% 68MHz
LQH44PN3R3MJ0p 3.3µH±20% 900mA 1000mA 0.088ohm ±20% 55MHz
LQH44PN4R7MJ0p 4.7µH±20% 840mA 980mA 0.117ohm ±20% 50MHz
LQH44PN6R8MJ0p 6.8µH±20% 720mA 860mA 0.143ohm ±20% 38MHz
LQH44PN100MJ0p 10µH±20% 560mA 790mA 0.207ohm ±20% 30MHz
LQH44PN150MJ0p 15µH±20% 430mA 610mA 0.385ohm ±20% 25MHz
LQH44PN220MJ0p 22µH±20% 400mA 550mA 0.480ohm ±20% 18MHz
LQH44PN330MJ0p 33µH±20% 360mA 430mA 0.740ohm ±20% 15MHz
LQH44PN470MJ0p 47µH±20% 300mA 380mA 1.014ohm ±20% 13MHz
Test Frequency: 100kHz Class of Magnetic Shield: Magnetic shield of magnetic powder in resin
Operating Temperature Range (Self-temperature rise is included): -40°C to +125°C
Operating Temperature Range (Self-temperature rise is not included): -40°C to +85°C
Only for reflow soldering.
*1 When Rated Current is applied to the Products, Inductance will be within ±30% of nominal Inductance value.
*2 When Rated Current is applied to the Products, self-generation of heat will rise to 40°C or less.
*1 *2
4.0±0.2
1.1±0.2 1.1±0.2
4.0±0.2
1.5 (typ.)
0.4 (typ.)
1.1±0.1
(0.12)
(in mm)
0.1
1
10
100
1000
0.1 1 10 100 1000
Frequency (MHz)
Inductance (µH)
1.0µH
2.2µH
1.5µH
3.3µH
4.7µH
6.8µH
10µH
15µH
22µH
33µH
47µH
0.1
1
10
100
10 100 1000 10000
Current (mA)
Inductance (µH)
1.0µH
1.5µH
2.2µH
3.3µH
4.7µH
6.8µH
10µH
15µH
22µH
33µH
47µH
54
Wire Wound Magnetic Type for Voltage Conversion
Inductor for Power Lines (Power Inductor)Inductor for Low Frequency CircuitsRF Inductor
!Note
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
O05E.pdf
Oct.13,2011