Datasheet

ManualsBrandsMurata ManualsInductorsInductor, SMD, 33nH, 420mA, 3.2GHz, 230mOhm

http://www.murata.com/

Data Sheet

Note:

1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our

products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.

2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product

specifications or transact the approval sheet for product specifications before ordering.

o This data sheet is applied for CHIP COIL used for General Electronics equipment for your design.

2006.3.9

Coils/Inductors/Transfomers > Chip Coils > for High Frequency Horizontal Wire Wound

1.6±0.2

0.8±0.2

0.80±0.15

in mm

0.8±0.2

0.2±0.1

0.3±0.1 0.3±0.1

0.4max

LQW18AN_10 : 0.8±0.3

Chip Coils for High Frequency Horizontal Wire Wound

LQW18A_00 Series (0603 Size)

■ Dimension ■ Packaging

Code Packaging Minimum Quantity

D 180mm Paper Tape 4000

J 330mm Paper Tape 10000

B Bulk(Bag) 500

■ Rated Value (p: packaging code)

Part Number Inductance Test Frequency Rated Current Max. of DC resistance Q (min.) Test Frequency Self Resonance Frequency (min.)

LQW18AN2N2D00p

2.2nH±0.5nH 100MHz 700mA 0.049ohm 16 250MHz 6000MHz

LQW18AN3N6C00p

3.6nH±0.2nH 100MHz 850mA 0.059ohm 25 250MHz 6000MHz

LQW18AN3N6D00p

3.6nH±0.5nH 100MHz 850mA 0.059ohm 25 250MHz 6000MHz

LQW18AN3N9C00p

3.9nH±0.2nH 100MHz 850mA 0.059ohm 35 250MHz 6000MHz

LQW18AN3N9D00p

3.9nH±0.5nH 100MHz 850mA 0.059ohm 35 250MHz 6000MHz

LQW18AN4N3C00p

4.3nH±0.2nH 100MHz 850mA 0.059ohm 35 250MHz 6000MHz

LQW18AN4N3D00p

4.3nH±0.5nH 100MHz 850mA 0.059ohm 35 250MHz 6000MHz

LQW18AN4N7D00p

4.7nH±0.5nH 100MHz 850mA 0.059ohm 35 250MHz 6000MHz

LQW18AN5N6C00p

5.6nH±0.2nH 100MHz 750mA 0.082ohm 35 250MHz 6000MHz

LQW18AN5N6D00p

5.6nH±0.5nH 100MHz 750mA 0.082ohm 35 250MHz 6000MHz

LQW18AN6N2C00p

6.2nH±0.2nH 100MHz 750mA 0.082ohm 35 250MHz 6000MHz

LQW18AN6N2D00p

6.2nH±0.5nH 100MHz 750mA 0.082ohm 35 250MHz 6000MHz

LQW18AN6N8C00p

6.8nH±0.2nH 100MHz 750mA 0.082ohm 35 250MHz 6000MHz

LQW18AN6N8D00p

6.8nH±0.5nH 100MHz 750mA 0.082ohm 35 250MHz 6000MHz

LQW18AN7N5D00p

7.5nH±0.5nH 100MHz 750mA 0.082ohm 35 250MHz 6000MHz

LQW18AN8N2D00p

8.2nH±0.5nH 100MHz 650mA 0.11ohm 35 250MHz 6000MHz

LQW18AN8N7D00p

8.7nH±0.5nH 100MHz 650mA 0.11ohm 35 250MHz 6000MHz

LQW18AN9N1D00p

9.1nH±0.5nH 100MHz 650mA 0.11ohm 35 250MHz 6000MHz

LQW18AN9N5D00p

9.5nH±0.5nH 100MHz 650mA 0.11ohm 35 250MHz 6000MHz

LQW18AN10NG00p

10nH±2% 100MHz 650mA 0.11ohm 35 250MHz 6000MHz

LQW18AN10NJ00p

10nH±5% 100MHz 650mA 0.11ohm 35 250MHz 6000MHz

LQW18AN11NG00p

11nH±2% 100MHz 650mA 0.11ohm 35 250MHz 6000MHz

LQW18AN11NJ00p

11nH±5% 100MHz 650mA 0.11ohm 35 250MHz 6000MHz

Operating Temperature Range: -55°C to +125°C

Only for reflow soldering.

Continued on the following page.

Summary of content (4 pages)

PAGE 1
Coils/Inductors/Transfomers > Chip Coils > for High Frequency Horizontal Wire Wound Data Sheet Chip Coils 1 for High Frequency Horizontal Wire Wound LQW18A_00 Series (0603 Size) ■ Packaging 0.8±0.2 0.4max ■ Dimension 0.80±0.15 Packaging Minimum Quantity D 180mm Paper Tape 4000 J 330mm Paper Tape 10000 B Bulk(Bag) 500 0.2±0.1 1.6±0.2 Code *1 0.8±0.2 *1 LQW18AN_10 : 0.8±0.3 0.3±0.1 0.3±0.
PAGE 2
Coils/Inductors/Transfomers > Chip Coils > for High Frequency Horizontal Wire Wound Data Sheet 2 Continued from the preceding page. Part Number Inductance Test Frequency Rated Current Max. of DC resistance Q (min.) Test Frequency Self Resonance Frequency (min.) LQW18AN12NG00p 12nH±2% 100MHz 600mA 0.13ohm 35 250MHz 6000MHz LQW18AN12NJ00p 12nH±5% 100MHz 600mA 0.13ohm 35 250MHz 6000MHz LQW18AN13NG00p 13nH±2% 100MHz 600mA 0.
PAGE 3
Coils/Inductors/Transfomers > Chip Coils > for High Frequency Horizontal Wire Wound Data Sheet 3 Continued from the preceding page. Part Number Inductance Test Frequency Rated Current Max. of DC resistance Q (min.) Test Frequency Self Resonance Frequency (min.) LQW18AN75NJ00p 75nH±5% 100MHz 270mA 0.56ohm 34 150MHz 2050MHz LQW18AN82NG00p 82nH±2% 100MHz 250mA 0.60ohm 34 150MHz 2000MHz LQW18AN82NJ00p 82nH±5% 100MHz 250mA 0.
PAGE 4
Coils/Inductors/Transfomers > Chip Coils > for High Frequency Horizontal Wire Wound Data Sheet 4 Continued from the preceding page. ■ Q-Frequency Characteristics (Typ.) ■ Inductance-Frequency Characteristics (Typ.) 10000 120 8.7nH 100 470nH 220nH 20nH 1000 Inductance (nH) 80 47nH Q 60 100nH 40 100nH 100 47nH 20nH 10 8.