Datasheet

!Caution
35
4
!Note
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
■ !Caution (Soldering and Mounting)
■ !Caution (Handling)
Vibration and impact
Do not expose a capacitor or its leads to excessive
shock or vibration during use.
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
RESULT, WORST CASE, IN A SHORT CIRCUIT
AND CAUSE FUMING OR PARTIAL DISPERSION
WHEN THE PRODUCT IS USED.
1. Vibration and impact
Do not expose a capacitor or its leads to
excessive shock or vibration during use.
2. Soldering
When soldering this product to a PCB/PWB, do not
exceed the solder heat resistance specification of
the capacitor. Subjecting this product to excessive
heating could melt the internal junction solder and
may result in thermal shocks that can crack the
ceramic element.
3. Bonding, resin molding and coating
In case of bonding, molding or coating this product,
verify that these processes do not affect the
quality of capacitor by testing the performance of
the bonded, molded or coated product in the
intended equipment.
In case the amount of application, dryness/
hardening conditions of adhesives and molding resins
containing organic solvents (ethyl acetate, methyl
ethyl ketone, toluene, etc.) are unsuitable, the
outer coating resin of a capacitor may be damaged
by the organic solvents and may result, worst case,
in a short circuit.
The variation in thickness of adhesive or molding
resin or coating may cause an outer coating resin
cracking and/or ceramic element cracking of a
capacitor in a temperature cycling.
4. Treatment after bonding, resin molding and coating
When the outer coating is hot (over 100 degrees
centigrade) after soldering, it becomes soft and fragile.
So please be careful not to give it mechanical stress.
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
RESULT, WORST CASE, IN A SHORT CIRCUIT
AND CAUSE FUMING OR PARTIAL DISPERSION
WHEN THE PRODUCT IS USED.
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
C49E.pdf
10.3.8