Operations Manual

06 Oct 2022
This document contains proprietary and confidential information originated or owned by Cubic. Neither this document nor the
information disclosed herein shall be reproduced or transferred to other documents or used or disclosed to others for
manufacturing or any other purposes except as specifically authorized in writing by Cubic.
8800-45001.A
3-2
3.2 AUDIO FEEDBACK AND DISPLAY INDICATORS
In addition to the screen display, the validator provides audio feedback in the form of a “Good” tone, “Bad”
tone or “Warning” tone depending on the transaction results.
3.3 VALIDATOR SCREENS AND INDICATORS
This section provides information and examples for the validator screens and audio. The text in the screens is
configurable and may change per the transit agency’s discretion.
NOTE
When the validator starts up after a reboot or power off, note the
state on the display. The display stays OFF for a period of up to 60
seconds, showing a black screen with a red X and the NOT IN
SERVICE text.
3.3.1 In Service Screen
When the validator is in service, the In Service screen displays with a black background and white text as
shown in Figure 3-3. If it is in service, but cannot process EMV cards it displays with a card, as shown in
Figure 3-4. The screen contains both a visual graphic and text message prompting the Traveler to tap their
contactless fare media to the validator. The display is black when In Service with a white triangle and “Tap
below” text.
Figure 3-3. In Service Screen Example
Figure 3-4. In-Service No EMV Example