Operations Manual

06 Oct 2022
This document contains proprietary and confidential information originated or owned by Cubic. Neither this document nor the
information disclosed herein shall be reproduced or transferred to other documents or used or disclosed to others for
manufacturing or any other purposes except as specifically authorized in writing by Cubic.
8800-45001.A
ii
Proprietary Notice
The information disclosed herein contains proprietary rights of Cubic Transportation Systems, Inc. (Cubic).
Neither this document nor the information disclosed herein shall be reproduced or transferred to other
documents. Nor shall the information be used or disclosed to others for manufacturing or any other purposes
except as specifically authorized in writing by Cubic.
Copyright
©
2022 Cubic Corporation. All rights reserved.
TRADEMARKS
Cubic
®
is a registered trademark of Cubic Corporation.
All other product and service names mentioned herein are the service marks, trademarks or registered
trademarks of their respective companies or owners.
The Cubic Validator-3 (FCC ID LVCVAL3LTE and IC ID 4387A-VAL3LTE) contains FCC IDs: LVCTR04,
VPYLBEE5HY1MW
and RI7LE910CXNF.
It contains IC IDs: 4387A-TR04, 772C-LBEE5HY1MW and 5131A-LE910CXNF.
FEDERAL COMMUNICATIONS COMMISSION NOTICES
The following Federal Communications Commission (FCC) notices apply:
1. The user is cautioned that changes or modifications to the Validator 3 that are not expressly
approved by Cubic could void the user's authority to operate this equipment.
2. “NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference won’t occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.”
2a. “Cet équipement a été testé et déclaré conforme aux limites d'un appareil numérique de classe B,
conformément à la partie 15 des règles de la FCC. Ces limites sont conçues pour fournir une protection
raisonnable contre les interférences nuisibles dans une installation résidentielle. Cet équipement génère des
utilisations et peut émettre de l'énergie de radiofréquence et, s'il n'est pas installé et utilisé conformément aux
instructions, peut causer des interférences nuisibles aux communications radio. Cependant, il n'y a aucune
garantie que des interférences ne se produiront pas dans une installation particulière. Si cet équipement
cause des interférences nuisibles à la réception radio ou télévision, ce qui peut être déterminé en éteignant et
en rallumant l'équipement, l'utilisateur est encouragé à essayer de corriger l'interférence par l'une des
mesures suivantes :
- Réorientez ou déplacez l'antenne de réception.
- Augmenter la distance entre l'équipement et le récepteur.