Operations Manual

8800-45001.A
This document contains proprietary and confidential information originated or owned by Cubic. Neither this document nor the
information disclosed herein shall be reproduced or transferred to other documents or used or disclosed to others for
manufacturing or any other purposes except as specifically authorized in writing by Cubic.
06 Oct 2022
1-1
1. INTRODUCTION
This manual provides operation procedures for the Validator 3 product. It is intended for use by authorized
transit personnel and contains equipment descriptions, operational instructions, and preventive maintenance
procedures.
1.1 SAFETY
Throughout this manual WARNING, CAUTION and NOTE graphics are used to highlight areas where special
attention must be used. Warnings and Cautions are used to highlight procedures or activities that may cause
injury or death to personnel and possible damage to equipment. Notes are used to provide special
instructions and clarification for procedures. Examples of each graphic are provided below.
WARNING
Operating procedures or practices cited to prevent the following
operational or maintenance procedural step from causing serious
injury or loss of life.
CAUTION
Operation procedures or practices cited to prevent the following
operational or maintenance procedural step from causing injury to
personnel or damage to equipment.
NOTE
An amplifying or explanatory comment related to procedural steps
or text.