User Guide

3.30
Stand-alone Fax
Notes:
• If ‘MEMORY FULL’ occurs while scanning into the memory, the display
will show:
Press ➛ or ❿ to select the option you want. If you select CANCEL,
broadcasting will be cancelled. If you select DONE, your machine will
only broadcast previously scanned pages.
• If an error occurs while sending to a specific number, the machine
transmits the document to all the other numbers, then retries the
number that previously recorded an error. After completing
transmission, your machine will print the multi-communication report.
Delayed Fax
The F-110 can be set to send a fax at a future time.
1. Load your document face down with the top edge going into the
document feeder first. Adjust the Resolution and Contrast, if
necessary. For details, see page 3.9.
2. Press ADVANCED FAX on the front panel. The display will show the
first menu; BROADCASTING.
3. Press ➛ or ❿ until ‘DELAYED FAX’ appears, and press START/ENTER
to access the Delayed FAX menu.
4. Enter the number of the remote machine using the ten number
keypad.
You can also press a one-touch button that includes group dial
buttons. If not, press SPEED(#), enter a 2-digit speed dial number,
then press START/ENTER. The stored number appears on the
display.
5. Press START/ENTER to confirm the number. The display asks if you
want to enter another fax number.
7. The document will be scanned into memory. The display shows the
memory capacity and the number of pages being stored. The machine
begins sending the documents in order of the numbers you entered.
ENTER ANOTHER NO
JOB❿CANCEL❿DONE