All in One Printer User Manual
Table Of Contents
- Preface
- The manuals for your machine
- Contents
- How to read this manual
- Regulatory information
- Limited warranty
- Precautions
- Chapter1 Layout & Installation
- Chapter2 Getting started
- Chapter3 Autodialler
- Chapter4 Sending faxes
- Chapter5 Receiving faxes
- Chapter6 Using F-code box features
- F-code: an introduction
- Creating or modifying an F-code box
- Printing a list of F-code boxes
- Printing a list of documents stored in your F-code boxes
- Erasing an empty F-code box
- Storing a document in a bulletin box for polling
- Printing a document stored in a bulletin box
- Erasing a document stored in a bulletin box
- Printing a document received in the security box
- Sending a document using a subaddress and password
- Polling a document using a subaddress and password
- Chapter7 Copying
- Chapter8 Special features
- Chapter9 Security features
- Security features
- Using department codes
- Turning department code protection ON and OFF
- Entering a department code
- Erasing a department code
- Turning the department code setting on and off
- Fax charge setting
- Copy charge setting
- Sending a fax using a department code
- Making a copy using a department code
- Printing the department code list
- Resetting the department code counter
- Copy protection
- Chapter10 User settings
- Chapter11 Report & Lists
- Chapter13 Maintenance & Problem solving
- Appendix & Index
6-5us I n G f-c o d e f e a t u r e s
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
us I n G f-c o d e b o x f e a t u r e s
Press <q> or <p> to select “On” or “Off”, then press <Enter>.
Go on to the next one.
• Erase Tx Doc — Determines whether to erase a document from the box after it is
sent to a polling request.
Erase Tx Doc. :Off
/
/Enter
“On”: Your machine erases the document from the box as soon as it sends it. If you
choose “On”, this box can be polled only once per document.
“Off”: Your machine does not erase a document from the box when it is polled. As
long as your machine holds AC power and you do not erase the document from
the box, the document is available indefinitely for polling.
Press <q> or <p> to select “On” or “Off”, then press <Enter>.
12
Go on to step 22.
If you setup a Relay box:
13
The machine asks the fax number where to relay the received documents.
Enter Relay Number
_
14
Press the one-touch key or press the <Speed Dial/Group> followed by the three-digit
identifier to enter the fax number. You cannot use the numeric keys to enter these
numbers.
To add each fax number, press the “Broadcast” soft key. You can specify up to 200
numbers. For soft key information, see page 8-2.
15
Press <Enter>.
Select TTI :Sender
/
/Enter
The machine asks you for the default TTI.
•“Sender”—Relaythedocumentwithoriginator’sTTI.
•“Both”—Relaythedocumentwithboththeoriginator’sTTIandyourTTI.
•“Yours”—RelaythedocumentwithyourTTIinsteadoftheoriginator’sTTI.
16
Press <q> or <p> to select TTI. Then press <Enter>.
Auto Print :Off
/
/Enter
“On”: A document will be printed automatically when it is received in the box.
“Off”: Received documents are not printed, only relayed to other destinations.
17
Press <q> or <p> to select “On” or “Off”, then press <Enter>.
18
Go on to step 22.