All in One Printer User Manual
Table Of Contents
- Preface
- The manuals for your machine
- Contents
- How to read this manual
- Regulatory information
- Limited warranty
- Precautions
- Chapter1 Layout & Installation
- Chapter2 Getting started
- Chapter3 Autodialler
- Chapter4 Sending faxes
- Chapter5 Receiving faxes
- Chapter6 Using F-code box features
- F-code: an introduction
- Creating or modifying an F-code box
- Printing a list of F-code boxes
- Printing a list of documents stored in your F-code boxes
- Erasing an empty F-code box
- Storing a document in a bulletin box for polling
- Printing a document stored in a bulletin box
- Erasing a document stored in a bulletin box
- Printing a document received in the security box
- Sending a document using a subaddress and password
- Polling a document using a subaddress and password
- Chapter7 Copying
- Chapter8 Special features
- Chapter9 Security features
- Security features
- Using department codes
- Turning department code protection ON and OFF
- Entering a department code
- Erasing a department code
- Turning the department code setting on and off
- Fax charge setting
- Copy charge setting
- Sending a fax using a department code
- Making a copy using a department code
- Printing the department code list
- Resetting the department code counter
- Copy protection
- Chapter10 User settings
- Chapter11 Report & Lists
- Chapter13 Maintenance & Problem solving
- Appendix & Index
6-9us I n G f-c o d e f e a t u r e s
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
us I n G f-c o d e b o x f e a t u r e s
Printing a document stored in a bulletin box
1
Switch to the fax mode by pressing
<
c o p y
4
f a x
4
s c a n
>
.
2
Press <Menu>, <4>, <3>, <2>, then <Enter>.
Select F-Code Box
01:Bulletin box 1
3
Press <q> or <p> to select the bulletin box. Then press <Enter>.
01:F-Code Document
Enter I.D. Code:****
(If the I.D. code is not set for this box, you can skip to step 5.)
4
Use the numeric keys to enter your F-code box’s four-digit I.D. code.
5
Press <Enter>.
01:Select File No.
00:All Documents
6
Press <q> or <p> to select the file number (1-30) of the document you want to print.
If you want to print all documents stored in the bulletin box, enter “0” (zero).
7
Press <Enter>.
Your machine prints the chosen document, then returns to the standby mode.
Erasing a document stored in a bulletin box
1
Switch to the fax mode by pressing
<
c o p y
4
f a x
4
s c a n
>
.
2
Press <Menu>, <4>, <2>, <2>, then <Enter>.
Select F-Code Box
01:Bulletin box 1
3
Press <q> or <p> to select the bulletin box. Then press <Enter>.
01:F-Code Document
Enter I.D. Code:****
(If the I.D. Code is not set for this box, you can skip to step 5.)
4
Use the numeric keys to enter your F-code box’s four-digit I.D. code.
5
Press <Enter>.
01:Select File No.
00:All Documents
6
Press <q> or <p> to select the file number (1-30) of the document you want to erase.
If you want to erase all documents stored in the bulletin box, enter “0” (zero).
7
Press <Enter>. The following two displays will appear alternately:
01:Bulletin box 1
Erase Enter
01:Bulletin box 1
Not Erase Cancel
8
Press <Enter> to erase the document and to return to the standby mode.
Press <Cancel> to quit without erasing and to return to the standby mode.