All in One Printer User Manual
Table Of Contents
- Preface
- The manuals for your machine
- Contents
- How to read this manual
- Regulatory information
- Limited warranty
- Precautions
- Chapter1 Layout & Installation
- Chapter2 Getting started
- Chapter3 Autodialler
- Chapter4 Sending faxes
- Chapter5 Receiving faxes
- Chapter6 Using F-code box features
- F-code: an introduction
- Creating or modifying an F-code box
- Printing a list of F-code boxes
- Printing a list of documents stored in your F-code boxes
- Erasing an empty F-code box
- Storing a document in a bulletin box for polling
- Printing a document stored in a bulletin box
- Erasing a document stored in a bulletin box
- Printing a document received in the security box
- Sending a document using a subaddress and password
- Polling a document using a subaddress and password
- Chapter7 Copying
- Chapter8 Special features
- Chapter9 Security features
- Security features
- Using department codes
- Turning department code protection ON and OFF
- Entering a department code
- Erasing a department code
- Turning the department code setting on and off
- Fax charge setting
- Copy charge setting
- Sending a fax using a department code
- Making a copy using a department code
- Printing the department code list
- Resetting the department code counter
- Copy protection
- Chapter10 User settings
- Chapter11 Report & Lists
- Chapter13 Maintenance & Problem solving
- Appendix & Index
7-4 co p y I n G
Basic copy settings
Selecting the document type
•“Text”—Selectthiswhencopyingletters.
•“Photo&Text”—Selectthiswhencopyingdocumentscontainingphotographsordraw-
ings with letters.
•“Photo”—Selectthiswhencopyingphotographsordrawings.
To select the document type:
1
Press “Doc. Resolution”.
Resolution :300dpi
t
Photo&Text
u
2
Press <t> or <u> to select the document type.
Scanning the contrast
Setting the scanning contrast allows you to adjust the excessive light or darkness of the
document pages you are copying.
To change the contrast setting:
1
Press <Contrast>.
Set Contrast
Light
v
·|
|·
u
Dark
2
Press <t> to lighten, press <u> to darken, or press <Contrast> repeatedly to select
the contrast.
To avoid confusing the Light and Dark settings, just remember — “Light lightens” and
“Dark darkens”.
Zoom ratio
There are three ways to enter the zoom ratio.
NOTE: For enlarge copy, you can only use the document glass. The document glass is avail-
able only for the MFX-1950.
Using preset ratios
Press <p> or <q> to select the following preset ratio.
•50%:Min.
•64%:Letter(8.5"×11")
Half-letter(5.5"×8.5")
•78%:Legal(8.5"×14")
Letter(8.5"×11")
•100%
•129%:Half-letter(5.5"×8.5")
Letter(8.5"×11")
•200%:Max.