All in One Printer User Manual
Table Of Contents
- Preface
- The manuals for your machine
- Contents
- How to read this manual
- Regulatory information
- Limited warranty
- Precautions
- Chapter1 Layout & Installation
- Chapter2 Getting started
- Chapter3 Autodialler
- Chapter4 Sending faxes
- Chapter5 Receiving faxes
- Chapter6 Using F-code box features
- F-code: an introduction
- Creating or modifying an F-code box
- Printing a list of F-code boxes
- Printing a list of documents stored in your F-code boxes
- Erasing an empty F-code box
- Storing a document in a bulletin box for polling
- Printing a document stored in a bulletin box
- Erasing a document stored in a bulletin box
- Printing a document received in the security box
- Sending a document using a subaddress and password
- Polling a document using a subaddress and password
- Chapter7 Copying
- Chapter8 Special features
- Chapter9 Security features
- Security features
- Using department codes
- Turning department code protection ON and OFF
- Entering a department code
- Erasing a department code
- Turning the department code setting on and off
- Fax charge setting
- Copy charge setting
- Sending a fax using a department code
- Making a copy using a department code
- Printing the department code list
- Resetting the department code counter
- Copy protection
- Chapter10 User settings
- Chapter11 Report & Lists
- Chapter13 Maintenance & Problem solving
- Appendix & Index
9-4 se c u r I t y f e a t u r e s
3
Press <Enter>.
Security :Off
/
/Enter
4
Press <q> or <p> to select “On”.
5
Press <Enter>.
The security reception mode is activated.
Turning security reception off and Printing the document stored in memory
During security reception mode, an incoming fax goes directly into your machine’s
memory and the memory receive light comes on. But the incoming fax message is not
printed. To print the documents received during the security reception mode (and to
return your machine to normal reception until the security reception beginning time):
1
Press <Menu>, <4>, <3>, <4>, then <Enter>.
If you are using the soft key, press the soft key.
The machine shows:
Security Rx Doc.
Enter Passcode :****
2
Use the numeric keys to enter the four-digit passcode and press <Enter>.
•Yourmachinewillprintallthedocumentsreceivedinthememoryandthenerase
them from memory. Then the machine turns the security reception off until the
next time you have scheduled security reception.
NOTE: • If you enter incorrect passcode, your machine refuses to print, and security recep-
tion remains on.
•Toturnthesecurityreceptionoffcompletely,select“Off”instep4of“Activating
security reception,” on page 9-3.